Replacement of Power Cable of Perimeter Lighting at Vadodara Airport.

Amount

[ SH: I- Supply of LT Cables ] Supply of XLPE insulated and PVC sheathed aluminium conductor armoured cable of 1.1 KV grade conforming to IS : 7098 (Part:-I) /1988 with upto date amendments etc.,as required.of following sizes : a) 3.5 X 120 Sq.mm

Supply of XLPE insulated and PVC sheathed aluminium conductor armoured cable of 1.1 KV grade conforming to IS : 7098 (Part:-I) /1988 with upto date amendments etc.,as required.of following sizes : a) 4 X 25 Sq.mm

Supply of XLPE insulated and PVC sheathed aluminium conductor armoured cable of 1.1 KV grade conforming to IS : 7098 (Part:-I)/1988 with upto date amendments etc.,as required.of following sizes : a) 4 X 16 Sq.mm

[ SH II: Laying of cable and other Associated works ] SITC of Dust & vermin proof Outdoor type double door panel , suitable size on angel iron frame work / Flate iron frame work and to withstand rough usage shall be mounted on Floor at suitable angle iron stand having minimum angle size of 50mm x 50mm x 5mm thick. The panel shall be fabricated with 14 SWG MS sheet complete with all accessories suitable angle/ channels frame, gland plates, painting etc. including supplying and fixing of following accessories and making inter connection, earth connection, neutral link, grouting of the angle iron stand legs shall be in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) etc. complete as per the site requirement. 320A, MCCB, 4P, 35-37 KA (Icu= 100% Ics) with extended rotary handle and spreaders - 02 Nos. Multi function meter (Shows Voltage, Current & Frequency) with 3 line LCD Display of size 96 x 96 mm. - 02 Nos. Indication Lamp R, Y & B (LED Type) -02 set Mechanical key lock (2 Lock + 1 Key) Outgoing : 100A, MCCB, 4P, 35 KA (Icu= 100% Ics) with extended rotary handle - 07 Nos. Indication Lamp R & G (LED type) - 07 Set Other : 500A Aluminimum busbar, 3 Phase & Neutral Necessary CT & Control wiring arrangement Power terminal and other accessories

SITC of Dust & vermin proof Outdoor type double door panel , suitable size on angel iron frame/ flate iron frame work and to withstand rough usage shall be mounted on Floor at suitable angle iron stand having minimum angle size of 50mm x 50mm x 5mm thick. The panel shall be fabricated with 14 SWG MS sheet complete with all accessories suitable angle/ channels frame, gland plates, painting etc. including supplying and fixing of following accessories and making inter connection, earth connection, neutral link, grouting of the angle iron stand legs shall be in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) etc. complete as per the site requirement. Incomer : 100A, MCCB, 4P, 35-37 KA (Icu= 100% Ics) with extended rotary handle and spreaders - 01Nos. Multi function meter (Shows Voltage, Current & Frequency) with 3 line LCD Display of size 96 x 96 mm. - 01 Nos. Indication Lamp R, Y & B (LED Type) -01 set Outgoing : 100A, MCCB, 4P, 35-37 KA (Icu= 100% Ics) with extended rotary handle and spreaders - 01Nos. MCB FOUR pole 40A - 05Nos. MCB Double pole 25A -3 Nos Digital Timer [ Current - 8A, Voltage- 240V AC, Opt. temp --10 to +55 Deg, multifunction Timer, Din rail Mount Contactor - 3P, 100A Other : 150A Aluminimum busbar, 3 Phase & Neutral Necessary CT & Control wiring arrangement Power terminal and other accessories

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) Above 185 sq. mm and upto 400 sq. mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/ Closed Trench etc. as required. a) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/ Closed Trench etc. as required. a) Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in masonary open duct etc as required. a) Above 185 sq. mm and upto 400 sq. mm

SITC of out door feeder pillar made out of 14 SWG MS sheet,of size 600mm x 450mm x 400mm, having four frangible legs of suitable length each of angle iron 35mm X 35mm x 5 mm size , TPN aluminum busbars of rating 200A, painting and writing i/c danger plate, fixing with cement concrete (1:2:4) and also making the cement concrete bed (1:4:8) of radius one meter around the feeder pillar of 100mm thickness etc. as per site requirement.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 400 Sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 240 Sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 120 Sq.mm

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground/ road/ hard soil complete with G.I. fittings /check nuts including trenching (75 cm deep) and re-filling and making the same surface etc as required a) 100mm Dia

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 400 Sq.mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 240 Sq.mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3.5 X 120 Sq.mm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm GI strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50 mm)

Providing and fixing 25 mm X 5 mm GI strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

Supply and laying of 6 kg per sq cm class high density polyethylene (HDPE ) pipe [ PN6, PE100] confirming to IS:14333:1996 with latest amendment, complete with accessories like couplers, jointing the pipe across the Road/ Runway / Taxi way/ APRON by trenchless horizontal drilling method including laying of pull wire etc. complete as required and as per the technical specifications enclosed. a) 160mm dia HDPE pipe

Construction of Man hole chambers (size 1.0mtr Length x 1.0 mtr Width x Depth upto 1.0 Mtr ) by brick work, plastering and 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) PCC in bottom including MS Plate cover of size not less then 600 x 600 x10mm on angle iron frame having minimum angle iron size of 50 x 50 x 5mm as required in sides of runway/taxiway/apron crossing etc complete as per site requirement.

Removing of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 185 Sqmm from existing RCC/ HUME/ METAL pipe/ Closed masonary trench and handed over to Electrical store as per instruction of EIC as per site requirement.

RVD INFRA SOLUTION PVT.LTD.

Ekveera Electrical Works & Services

jaydeep agency corporation

K Sharma Electricals Private Limited

Krishsons International Engineers And Consultants (I) Pvt. Ltd

S. N. ELECTRIC & MAINTENANCE PRIVATE LIMITED

Elbe Engineering Services

Yash Energy Pvt. Ltd

HRI ASSOCIATES

Techno Electricals

Mukherjee Commercial Enterprise

Shiva Solutions

Industrial Traders

POWER AUTOMATION AND CONTROLS

Taral Electricals

Manish Electricals

Sarjan Structure

BBN ENERGY SYSTEMS PVT LTD

ECS ENGINEERING PVT LTD

BR Power Control and Automation Services

M/s. Jyona Power