GE/863/EWS-T-69 OF 2021-22

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

M&L for removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete etc complete all as specified and directed.

M&L Reinforced cement concrete, M-30 design mix (using 20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete(Reinforcement to be measured separately) complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases od columns , raft and raft beams , sides and soffits of foundation and plinth beams and similar work vertical or better for rough finished surfaces of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M &L for pre-cast cement Concrete type C-1, (1:3:6) using 20mm graded stone aggregate, block masonry with solid blocks, exceeding 10cm in width and setting in cement mortar (1:4), complete all as specified.

M&L Reinforced cement concrete M-30 design mix (20 mm graded stone aggregate) in Columns, pillars,piers,posts and struts complete all as specified and directed.

M&L Form work to pillars, posts, struts, piers, columns and stachions with rough finished, square, rectangular or polygonal concrete surfaces, complete all as specified and directed.

M&L Reinforced cement concrete M-30 design mix (20 mm graded stone aggregate) in Beams, cantilevers, bressummers,lintel over 1.5 m clear span complete all as specified and directed.(Reinforcement to be measured and paid for seperately)

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete ,complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement) ,complete all as specified and directed..

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4 finished even and smooth (without using extra cement) , complete , all as specified and directed.

M & L for rendering 5mm thick on fair faces of brick or concrete surfaces in cement plaster 1:3 finished even and smooth (without using extra cement) all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm(broken stone/boulders), deposited, spread and levelled in layers n exc. 15 cm thick each layers , watered and rammed to a true surface

M & L for 75 mm thick cement concrete type D-2 (1:4:8) 40 mm graded stone aggregate as in sub base for floors, complete all as specified & directed

M&L for 50 mm thick Cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate), as in plinth protection, finishing cement concrete surface fair and even without using extra cement laid in alternate panels ,complete all as specified and directed.

M & L for 40 mm thick PCC (1:2:4) , type B-1, using 20mm graded stone aggregate as in flooring, finishing surface even and smooth without using extra cement, including fixing glass dividing strip , complete, all as specified and directed.(Glass dividing strip shall be measured and paid for seperately as supply only)

Supply only Glass dividing strip ,04mm thick and 38 mm wide , complete all as specified and directed.

Material & labour for preparation of new surfaces and applying three coats of White wash on ceiling surfaces, complete all as specified and directed.

M & L for Preparation of new wall surface, and applying three coats of White wash, complete all as specififed and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

M & L for preparation of new wooden surface of any description not otherwise described, exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of prink primer, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Fe - 410W, Gde E-250, Quality A, for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S & F Fe - 410W Gde E-250 ,Quality B, for Plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as speicifed and directed

S&F mild steel work as in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 15 cm but not exceeding 22.5cm with dia of neck 16 to 20 mm complete, all as specified and directed

S&F pressed steel frames of size 105x60mm using 1.25mm thick mild steel sheet , for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S & F 2nd Class Hardwood 35 mm thick plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S&F Steel windows single rebated with side hung shutters including projecting type hinges with steel handle, including receiving of sheet glass panes and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc, complete all as specified and directed.

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified and durected

S & F 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.

S & F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 3mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete, all as specifed and as directed

S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

S & F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, using mild steel 01 mm thickness of laths, complete all as speicifed and directed.

M&L for plain cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate in door, window frames, any size single or double rebated incl. arrangement of fixing hinges & fixtures as required, complete, all as specified and directed

M&L for plain cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregates as in foundation, filling, mass concrete and bed of drains etc complete all as specified and directed.

M&L for Pre-cast cement concrete solid block masonry in PCC (1:3:6) (using 20 mm aggregate stone aggregate) type C-1, as in wall, 10 cm thick and setting in cement mortar (1:4), complete, all as specified and directed.

M&L for cement concrete (1:2:4) , type B-1(using 20 mm graded stone aggregate) as in copings including necessary form work complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil , complete , all as specified and directed.

Surface excavation, not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and directed.

M&L for Hardcore broken stone or boulders of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L for machine pressed precast interlocking paver block any shape and size conforming to IS -15658-2006 of 80mm thickness, M-40 Gde, with grey cement and pigment, over and including 25mm thick sand cushioning, complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) ,complete all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in Cement mortar (1:4), complete all as specifed and directed.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) Multistranded FRLSH 1100 volt PVC insulated unsheathed cable in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.2 mm factory made and painted with stove enameled black paint with top cover 2mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm multistrand copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories complete all as specified and directed.

All as per item No 53 here in before but for one multipin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size complete all as specified and directed.

All as per item No 53 here in before but for one multipin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for Switch piano, flush type single pole, one way 6 Amps, complete all as specified and directed.

S&F for Socket outlet 2 in 1, multipin, 6Amps, complete all as specified and directed.

Supply and fixing SPN 32 Amps ,rating 240V, 10KA , 'C' curve, miniature circuit breaker (MCB) ,complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps, with connection testing and commissioning complete all as specified and directed.

S&F sheet metal enclosure for DBs 8 ways ,double door, 240 Volt, with 200 Amps rated bus bar, complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.

Supply, laying in trenches/ducts/along wall/through pipes etc, testing and commissioning LT cable, XLPE insulated, galvanized steel strip armoured, 1100Volts grade with multistranded aluminium conductor of cross sectional area 10 sqmm, 02 core including making cable connections by providing necessary aluminium lugs duly crimped properly and stainless steel glands,nuts,bolts and washers etc complete in all respects, as specified and directed.

Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches upto 23 cm and punning to 18 cm complete all as specified and directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.

M & L for brick sub class 'B' , old size , laid in trenches across the cable ,as in protection of UG cables, complete all as specified and directed.

Material & labour for GI tubes, "light grade", 50 mm bore with and including all fittings laid in trenches/road crossing/floors etc for cable protection, complete all as specified and directed. Note: Excavation and earth work shall be measured and paid for separately.

A P ENTERPRISES

M/s Parmod Kumar