SPECIAL REPAIR TO MD ACCN BLDG NO P-177/05 TO 177/08 (OR MD ACCN) OF 811 ENGR REGT ONGC (TA) AT LANCER LINE UNDER GE (ARMY) BARODA

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each complete.

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc. 1.5 Sqm each complete.

Taking down shutters of any description exc. 1 Sqm but n.exc.2 Sqm each complete.

Taking down shutters of any description exc. 1 Sqm but n.exc.2 Sqm and refixing in the same opening complete.

S&F Pressed steel frames for doors with double rebates of size 125X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; complete.

S&F Pressed steel frames for doors with single rebates of size 105X60 mm including necessary fixing lugs, hinges, lock strike plate, etc; completecomplete.

S&F 35 mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete.

M&L 35mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing , glass etc. sizes of members of shutters as specified in SSR Part-I Section 8.20 (a) complete.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

M&L Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings complete.

S&F stainlees steel butt hinges 100mm medium weight complete.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete.

S&F aluminium alloy handle 150 mm cast type anodised complete.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section complete.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete.

S&F anodised aluminium window shutters, side hung/sliding type aluminium sections including necessary joining cleats, sash bars, glazing clips, rubber neoprene packing, handles 01 No in each shutter, 02 Nos hinges per shutter, anodised aluminium snap beading, screws etc. as per manufacturers instruction & trade practice complete.

S&F Mild Steel Framed work suck as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars complete.

Demolition of brick/ stone masonry work built in cement mortar complete.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding complete.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with rubber packing to aluminum window in square n.exc 0.5sqm in each pane complete.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with rubber packing to aluminum window in square exc 0.5 sqm in each pane complete.

M&L for preparation of new wood and wood based surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete.

M&L for prepartion of old painted wood and wood based surface of any descrition not otherwise descrifed, over 10cm width or girth including knotting and stopping and applying one coat of synthetic enamel paint (any tint/shade) complete.

M&L for preparation of new steel or iron surface of any description not otherwise descsribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

S&F in repairs factory made 18 (+0.7mm) thick PVC sheet one sided pre laminated sheet cabinet shutter. 18 mm (+0.7mm) thk sheet shutter of density 600 kg/m3 bent at 90o and finished all edges at all level for making edges, Lipping/bending or 0.5 mm thk PVC sheet lipping at all four edges using bonding tape etc complete all as per Manufacturers's speciifcations

S&F in repairs tubular curtain rails 20 mm dia anodised aluminium alloy with fixing brackets, stops, rollers etc complete.

S&F in repairs anodised aluminium alloy brackets for curtain rails 20 mm dia complete.

S&F in repairs C.P grating of size 150 x 150 mm complete.

S&F in repairs sinks made of stainless steel 1mm thick with plugs, washers, waste coupling and PVC wastes pipe including bedding in Cement Mortar to dwarf wall or including fixing cantilever brackets &connecting unions to pipe overall size 495 mmx 420 mm bowl size 410 mm x 330 mm 160 mm all as specified.

S&F in repairs PVC flushing cistern low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC bend 32mm complete.

S&F in repairs cast iron 75 mm dia (outlet) floor/ nahani trap including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete.

S&F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy,fency type screwed down high pressure with capston head screwed for iron pipe complete.

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F in repair CP wall mixer three in one system for mixing hot and cold wather screwed down for iron pipe 15 mm bore and fixed complete all as specified and directed.

S&F in repair concealed stop cock fencing type with sheet flange cast copper alloy, scrwed down high precure with round operating knob for 15 mm bore pipe bore and fixed complete all as specified and directed.

S&F in repair 15mm bore shower rose with swivel joints brass chromium plated each of 65mm size including 30cm long arms C.P waste cup, washer etc complete.

Taking down steel tubing and connection including cleaning for refixing the same in new or old position of following size fixed on wall and ceilings or laid in floors complete.

S&F 15 mm dia galvanised iron tubing (ISI marked) medium grade including all necessary fittings and fixed to wall / ceiling or laid in floor jointed with tuflon tape complete.

Cutting chases for concelled pipe where required and pointing in cement mortor 1:3 etc in brick ball for bore of pipe 15/20 mm complete all as specified.

Demolition of cement concrete (Unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level) complete.

M&L for cement concrete 75mm thick (1:3:6) type C-1 (20mm graded crushed stone agg ) surface finished even and smooth without using extra cement as in plinth etc.complete.

M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone agg ) as in sub base complete.

M&L for machine vibrated coloured chequred cement concrete tiles 30cm x 30cm x 25 mm thick set and jointed in neat cement slurry and pointed with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete.

M&L 25 mm thick cement concrete(1:2:4) type B-0 (using 12.5 mm gradded crushed stone agg ) surface finished even and fair to receive top finishes as leveling course complete.

Roughening surfaces of old concrete floor by picking, sweeping,clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm complete.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed out in white or coloured cement to match, laid over and including screed bed 15mm thick in cement mortor (1:6) complete.

Demolition of stone slab of any description or thickness in floor, aprons etc. Laid bedded and pointed in any mortor complete.

M&L for glazed ceramic coloured wall tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rending in CM : 1:4 complete.

M&L for 16-18mm thick green marble in one piece machine cut as in cooking plate form,steps,window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment to make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete.

Rounding to edges of stone slabs such as steps cooking platefrom and other similar situations complete.

Taking down cement plaster from brick/concrete surface including raking out joints hacking for key scrubbing down with water etc complete.

M&L for 15mm thick rendering in cement mortor 1:6 on brick work or concrete surface of wall, surface finished even and smooth without using extra cement complete.

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall. 5mm thick plaster in CM:1:4 mixed with WPC @ 3% by weight of cement surface finished even and smooth without using extra cement over 10mm thick plaster in cement mortor 1:6 complete. (Note : WPC shall be measured & paid separately)

M&L for rendering 10mm thick on brick or concrete surface of ceiling in cement mortor 1:4 surface finished even and smooth without using extra cement complete.

M&L for preparation of new plastered surface of walls and applying two coats of oil emulsion distemper over 3 mm thick wall care putty on wall complete all as specified and as directed.

M&L for prepartion of newly plastered surface of ceiling and applying three coat of white wash complete.

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for complete removal of exisiting treatment on wall surface and apply two coat of Oil Bond distemper over 3mm thick wall care putty and priming coat complete all as specified.

M&L for complete removal of existing treatment on wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed

M&L preparation of old decoreted plastered surface of ceiling and applying one coat of white wash to match complete.

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete.

M&L for cement concrete (1:3:6) type C-1 (using 20mm graded crushed sotne agg ) as in coping bed plate for hold fast, Frame Filling etc including necessary form work etc complete all as specified

S&F in repair white vitreous china suqatting pan ''Orissa'' pattern size 580 x 440mm white with ''P'' or ''S'' trap and integral foot rest including connection to traps and to flusing pipe, anti syphonage pipe etc complete and making good to floor complete.

Taking down eaves gutters and rainwater pipes (any size or pattern ) including all fittings and accessories complete.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete.

S&F 110mm bore PVC (SWR)single T equal or unequal with ovel acces doors with rubber ring joints fixed to wall complete.

S&F 75 mm bore PVC (SWR) bends with ovel acces doors with rubber ring joints fixed to wall complete.

S&F 75 mm bore PVC (SWR)single T equal or unequal with ovel acces doors with rubber ring joints fixed to wall complete.

M&L75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete.

M&L110 mm dia PVC (SWR) vent cowl including jointing with solvent cement complete.

M&L for provision and application by brushing of treatment to reinforcement by application of corrrosion resisting coat in two coats, suitable time to be provided between coats according to manufacturers instructions to resist further deteroriation of reinforcement etc. complete. (Make Fosroc / piditlite or equivalent)

M&L for provision and application of approved epoxy based bond coat on concrete surfaces or sound bonding of cold and new concrete surfaces complete. (Make Fosroc/ pidilite or equivalent )

M&L for making of profile of structral memebers with polymer modified mortar in damaged areas 1:3 ( Cement:sand) mortar with 5 -10 percentage addition of latex polymer,w/c ratio of 0.35 in 20 mm thk layers / including leveling etc complete complete. ( Make Fosroc/ Pidilite or equivalent)

M&L for complete removal of loose/ cracked concrete including reinforcement if as required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of new/old reinforcement as required and applying 3 coats of white wash / 2 coats of cement base paint to match with existing surfaxes as directed complete. ( Note: reinforcement will be measured and paid seperately under respective items)

M&L for MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/ Binding/ hooping of coloumns/hooking ends and binding with and including MS wire ( annealed) not less then 0.9 m dia or securing with clips complete.

Supply only water proofing compound.

M&L for machine cut kota stone slab flooring 18-20mm thick in riser of steps, skriting, Dado and pillars jointed with grey cement slurry mixed with pigment to mach the shade of the slab including rubbing and polishing laid over and including10mm thick backing coat on verticle surface of wall or concrete surface in CM 1:4 complete.

M&L for complete removal of exising water proofing treatement including plaster and concrete pedding roughening of concrete surface cleaing and washing down the surface with water removing/rubbish off the out side complete.

Demolition cement concrete (un-reinforced) of any description and in any position not otherwise specificallly provided for n.exc 15cm thick over complete.

M&L for 50mm average thick padding with cement concrete 1:2:4 type B-1 using 20mm graded crused stone aggregate. finished even and smooth without using exra cement complete.

M&L for 10mm thick rendering in CM 1 :3 over concrete surfaces with water prooing compound @ 3% by weight of cement complete. (Note : WPC shall be measured & paid separately)

M&L for cement concrete 1:2:4 type B-1 using 20mm stone aggregate as in roof kerbs or mud stops rounded or chamfered on edge including necessary form work complete.

M&L for water proofing treatment to roof slab by applying one coat of bituminous/poly merized primer confirming to IS-3384 i.e 0.30 litre/sqm and laying actetic poly propylene (APP) modified membrane pre febricated reinforced with non wovan ployester of minimum 3.50 kg/sqm. 3mm thick (minimun) with minimum 75mm side overlap and minimum 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete.

Taking down carefully copper / Aluminium point wiring (light, fan, socket or power) including fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity complete.

M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade, conforming IS 694 & color code in conduit system of wiring, drawn in including medium grade PCV conduit not less than 20 mm dia concealed, including cutting chases, finising of slote by means of cement mortor making good to the existing surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 3.0mm thick factory made and factory painted with top cover 3.0 mm thick plastic laminated sheet6 fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

One light/fan/bell point controlled by one switch 6 Amp one way

One 3 pin switch socket combination 6 amp on the independent board.

One 3 pin socket outlet on same board with other switches.

All as described as per item No 24 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board.

One light point controlled by two way switches

S&F switch piano flush type single pole, one way 6amp, make: Anchor/SSK/Cona

S&F switch piano flush type single pole, TWO way 6amp, make: Anchor/SSK/Cona

S&F switch socket combination 5 pin 6 amp, make: Anchor/SSK/Cona

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal.

S&F fan regulator electronic type 100Watt 20V-50Hz , Make: Anchor cat No 38660 or equivalent

S&F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 230 volts ISI marked.

S&F in replacement under repair 7W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >600 lm. Make: Philips/Wipro/Crompton

S&F of 4' 18W LED Tube With Batten with system lumen output of 1800 lumens. System Efficacy should be > 115lm/ W. The Luminaire Should have Cool Daylight Color temp of 6500K & CRI>80.Life 40K burning hrs with 70% lumen maintenace. PF>0.95 Surge Protecton of 3KV.All the Photometrical & Electrical parametrs must be supported by LM79-08 test report from NABL Accridiated LAB OR UL, R9 Value > 0. Lamp starting time is not more than 1 Sec. The LED tube light conforms to applicable IS.Make of LED From Philips/Crompton/ Wipro. Housing of Batten should be made from Single piece powder coated CRCA sheet steel.Similar to Crompton LDSL 18-CDL with Master TLED 18W 1800 Lumens. Make : CG/Phillips/Wipro.

S&F MCB DB factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed. Make : Legrand/Schneider/L&T

SPN 12 way

SPN 8 way

S&F SPN 32 Amps 10 KA rupturing capacity. Make Legrand or its equivalent in Schnieder/ABB.

M&L MCB SP 5 to 30 Amp 240 Volts

M&L in repairs sub main wiring concealede conduit using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed.

S&F in repair energy efficient 5 star rated ceiling fan 1200mm sweep, single phase 230/240 volts AC and connecting up to including provn of porcilin connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing on completion, complete all as directed by engr-in-charge. Make : Havells/Orient/CG

S&F wall security light LED type complete with GI bend 1.2 mtr and fixing on wall/pole with clamp, nut & bolt complete all as directed and specified by Engr-In-Charge. CAT Part No.LSTO-25-CDL 25watt of Make CG or its equivalent in Phillips/Wipro.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6.0 mm burried directly in ground level with top edge of earth plate at a depth not less than 1.5 m below ground level connected to and including galvanised iron strip 25 X 4 mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 5 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, cast iron cover with lifting handle, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 40 mm bore light grade 7.5 m long test point etc complete.

S&F in replacement Exhaust fan 250 mm sweep 1250 RPM with minimum airflow/air delivery 720 Cmh, 06blades, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 230 Volt AC supply, rated power input not more that 45watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR

OM Engineering

Aditya Construction

AARTI ENTERPRISE