SPECIAL REPAIRING WORKS OF SURENDRANAGR SUB JAIL AT SURENDRANAGAR, DIST : SURENDRANAGAR, (INCLUDING ELECTRICAL WORK) (Third attempt)

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

55a Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade in existing pipe to be erected on/in brick wall / slab 1250.00 Mtr. 46.00 RS: Forty Six

along with continuous G. I. fish wire to draw mains laid in approved manner with plastering by cement mortar & finishing the surface to only

match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity. (Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS

copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour

code. [Wire must be having box packing] (Conductor resistance should be as per IS:8130/1984 )

55b For 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing 280.00 Mtr. 62.00 RS: Sixty Two

as per standard colour code. (with 20/25 mm dia. PVC pipe) (for power board and computer board mains) [Wire must be having box only

packing] (Conductor resistance should be as per IS:8130/1984 (In existing Pipe)

55c For 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing 230.00 Mtr. 86.00 RS: Eighty Six

as per standard colour code. (with 20/25 mm dia. PVC pipe) (for power board and computer board mains) [Wire must be having box only

packing] (Conductor resistance should be as per IS:8130/1984) (In existing Pipe)

55d For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi stranded conductor for earthing 200.00 Mtr. 120.00 RS: One

as per standard colour code. (with 25 mm dia. PVC pipe) (for MCBDB mains) [Wire must be having box packing] (Conductor Hundred Twenty

resistance should be as per IS:8130/1984) (In existing Pipe) only

56 Providing & fixing 20mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. 25.00 Mtr. 30.95 RS: Thirty and

complete of following sizes. Paise Ninty Five only

57 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, PVC bushes saddle, Check-nuts etc. 25.00 Mtr. 37.14 RS: Thirty

complete of following sizes. Seven and Paise

58a Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology 2.00 Each 7025.00 RS: Seven

earthing. Earthing electric rod must be made from Corrosion free Hot dip galvanizing pipes having following specification. (A)(A) Earthing Electrode: Thousand Twenty

outer pipe :- 88mm minimum O.D ,ISI 'B ' Class ISI mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark reputed Brand Five only

Terminal Size: 70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave rectangular shape so its

work as a terminal. The hot deep galvanising must be done after above process. Galvanised thickness must be minimum 75 micron any where. SS

Nut bolt:- 2 no. with washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of earth electrode with inside

conductive material minimum should be 26kg.(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2% (C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg. Necessary test report must be submitted. (D) Chamber and cover :- Earthing chamber

should be size of 400mmX400mmX400mm depth and Cover should be heavy duty cast iron with required size of 300mmX300mmX4mm

thick.Necessary test report must be submitted. 1. Short circuit test by ERDA/ CPRI for 25KA 2. Resistivity test of conducting material from NABL

accredited lab. 3. Hot dip galvanised / zinc coating micro test from reputed laboratory. 4. General test report from OEM regarding specification of

earthing. [Make to be approved by EIC] (Strictly subject to item specification only) OEM has to submit all detail & sample for approved before

supplying Water must be poured in bore before starting earthing. Earthing value must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. If

required. Earthing must be done in the presence of A.E (GSPHCL)(2 Nos Main Building+2 Nos Other Building +1 Nos Security cabine+ 4 Nos DG

58b For Above Earthing ( 2mtr.) Additional charges for boring in hard rock soil (By Breaker) & filling soft soil in earth pit. (Certificate for soil 2.00 Each 276.00 RS: Two

have to given by DEE/AE along with Photographs). Hundred Seventy Six

59 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted with red oxide be concealed in wall with necessary plastering & 2310.00 Sq. Inch 5.80 RS: Five and

finishing with 3 mm thick laminated sheet with grooving as directed of following depth 3" depth. Paise Eighty only

60a Providing following type of Modular Type Accessories mounted with 20 G G.I. company fabricated metalic box, single mounting base 136.00 Each 124.00 RS: One

frame covered with textured / metallic front plate, modules erected with necessary connection. As desired by Engineer in charge. One Hundred Twenty Four

No. SP 6 Amp. Cat-ii only

60b For One No 5 pin plug Cat-ii 136.00 Each 124.00 RS: One

Hundred Twenty Four

60c For Electronic hum Free steps EME Fan regulator. Cat.-II 56.00 Each 338.00 RS: Three

Hundred Thirty Eight

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

60d For Blank Plate Single. Cat.-II 100.00 Each 16.00 RS: Sixteen

60e For 16 Amp. SP one way switch.Cat.-II 12.00 Each 139.00 RS: One

Hundred Thirty Nine

60f For 6/16Amp. Universal socket .Cat.-II 12.00 Each 139.00 RS: One

Hundred Thirty Nine

61 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant indian standards ammended upto 5.00 Each 5536.00 RS: Five

date. Thousand Five

Supplying and fixing following way single phase MCB distrubution board of company fabricated IK 09 certificate with sheet box with Hundred Thirty Six

powder coated inside and outside after apply seven tank chemical process of MS sheet cover complete with suitable integral single only

piece construction tinned copper busbar and link with all necessary interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2) Seven

tank Powder coating Certificate (3) Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting Cover for 240 Volts

on surface / recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size FRLS

PVC insulated copper conductor up to terminal blocks and internal connection, tinned coppper bus bar, 1 no. tinned copper neutral

link, tinned copper earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 16 Way MCBDB: Including MCB DP 40 Amp. 30 mA double pole RS:Zero

ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), MCB 40 Amp. double pole only

switch (C curve) and S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on 230 Volt A.C. power. (6 Amp:- 4 Nos., 16 Amp:-

Nos. & 25 Amp: 4 Nos.)

(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium sticker as per site requirement and instructions given by EIC on

site. Font / number size given by EIC on site as per requirement]

62 Approved make 8-Way TPN Double Door metal clad D.B. company prewired having Incoming 25 Amp.10ka FOUR pole MCB, 3 2.00 Each 12606.00 RS: Twelve

NOS. 25Amp DP ELCB ,30ma and 18 nos. S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate on 415 Volt A.C. power and Thousand Six

having overload and short circuit tripping element breaking capacity 10KA (for all MCB & ELCB) to be erected in flush type and Hundred Six only

company fabricated 16 G.M.S./ IK 09 Certificate sheet box with powder coated inside and outside after apply seven tank chemical

process of M.S. sheet cover complete with suitable integral single piece construction tinned copper busbar- and link with all necessary

interconnection and with neccessary size wooden board for mounting MCBDB . Manufacturer must be Provided .(1)IP 43 Protection

Certificate.(2) Seven tank Powder Coating Certificate.(3) Copper/Brass make Neutral & Earthing link with Isolation and Protecting

Cover. (a) For 8 Way TPN MCBDB with I/c:- 25Amp FP MCB 10KA, 25A DP ELCB, 30ma,10KA -03 nos & O/G :- 6-32 Amp SP

MCB :- 18 Nos. (For 3phase Distribution if req.)

63 Supplying and erecting LED lamps with following wattage capacity of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in 52.00 Each 111.00 RS: One

built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5(a) 8 Watt Hundred Eleven

64 SITC Of Max. 24 Watt LED Indoor Commercial make high efficiency performance lamp with high quality diffused polycarbonate body 70.00 Each 370.00 RS: Three

with alluminium Heat Shink with Metal core PCB and dedicated electronic driver.The lamp is provided with following feautures life Hundred Seventy

25,000 hrs at L70 , efficiency >90lm/w, with high power factor >0.9, 2 KV surge protection, fixture wide voltage range from 160V to only

270V, 50/60 HZ, @ 240V application, THD<15% with CRI > 80 , for better color rendering .The data sheet of LM79 for complete lamp

can also be provided,The Lumen Output of 24w LED T8 Lamp is mini. 2160 Lumes.The Lamp is Installation with Batten CRCA

made base and Finishing done with Powder coating with 3 core wire up to pight point . ( Sample must be approved by EIC) ( model

Aprooved by EIC as per Specification) Note:-The manufacturer/ authorised Channel partner of the manufacturer has to submit 4 yr

free replcement Guarantee for complete Fixture )

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

65 Providing, erecting, testing ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must 56.00 Each 1929.00 RS: One

be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: Thousand Nine

maximum 53W, (5) RPM: minimum 350, (6) Service Value : Mini. 4.3 m3/mtr (7) Class of insulation: 'B', (8) No. of heavy duty premium Hundred Twenty Nine

quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick, (11) Colour: only

White high grade powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Minimum 1.5 mfd Aluminium body premium

quality Branded make,(14) Down road: up to 1.0 mtr as per site tequirment, (15) Required fixing accessories etc. (16) 3 core

sq.mm wire as per site requirment,(17) no vibration and noise due to mechanical parts. (18) Necessary safety wire shoud be erected

with fan for safety & Check with EIC (19) BEE Star Rated (OEM has to approved model as per tender specification and tested at

ERDA) model approved by engineer in charge subject to above specifications)

66 Supplying & erecting 19/20 mm. nominal bore "B" class G.I. pipe / M.S. pipe down rod erected duly painted for fan complete with 56.00 Rn. Mtr. 107.00 RS: One

necessary 24/0.2 flat 3 core flexible Core with earthing. The down rod thickness, hole, locking arrangement, construction, powder Hundred Seven

coating, colour shed should be same as original down rod brought with ceiling fan. For that agency has to give original down rod only

sample to fabricator and one sample down rod should be approved with EIC. After approval given by EIC agency can use the down

rod as per approved sample. If without approval down rod will be erect on site, agency has to replace them with own cost.

67 Supplying & erecting approved make 200mm sweep low noise decorative exhaust fan having Aerodynamically designed & Blanced 10.00 Each 1687.00 RS: One

Blade, Blade finish Opaque,body colour White , finish Glossy , Rated Speed 1350 revolution per minute ,air delivery 300 m³ / min , Thousand Six

noise level 43 dB , Power Consumption 25 W, Rated Voltage 230 V , no. of blades 7 , guard 18 Louvers , square frame ABS body Hundred Eighty

with inbuilt lowers & square frame.(Make & Model Approved by EIC subject to Above Specification ) Seven only

68 Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board having portable bell push working on D.C. & bell 2.00 Nos RS: Two

on 230V A.C. supply with cells / battery 248.00 Hundred Forty Eight

69 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. 1.00 Each 16061.00 RS: Sixteen

having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Thousand Sixty One

connections, spreader tinned copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU only Cat III only

70 Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. 2.00 Each 7976.00 RS: Seven

having normal current rating 125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal Thousand Nine

connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. . housing.ICS=100% of ICU only Hundred Seventy Six

Cat III (Panel / GEB) only

71a Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to 2.00 Each 730.00 RS: Seven

IS:8828 in existing box having following capacity. For 63 Amp. Hundred Thirty

71b Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to 8.00 Each 662.00 RS: Six Hundred

IS:8828 in existing box having following capacity. For 40 Amp. Cat-III (in Main Panel and Section Pillar for Required) Sixty Two only

72 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to 16.00 Each 327.00 RS: Three

IS:8828 in existing box having following capacity. For 40 Amp. Cat.III Hundred Twenty

73 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to 4.00 Each 599.00 RS: Five

IS:8828 insame company metal box with earthing terminal having following capacity with necessary Numbering/marking with oil Paint Hundred Ninty Nine

by painter.capacity. For 40 Amp. Cat.III only

74 Providing and Erecting of Miniature circuit breaker single pole 6 Amp. to 25 Amp. suitable to operate on 240 V A.C. system and having 10.00 Each 111.00 RS: One

breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark. Cat.-III Hundred Eleven

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

75 Supply, Installation, Testing & Commissioning of Three Phase, 440 V Surge Suppressor protection Device (SPD) & 40 Amp TPN MCB 1.00 Each 6319.00 RS: Six Thousand

(or As per SPD OEM guide line for the protection of SPD which is erected such a way that it can be operated easily) SPD must be Three Hundred

capable to protect all electrical and electronics equipments if SPD blast or fuse then the panel builder must have replace it soon during Ninteen only

defect liability period.The Detail Specification of SPD are As per Attached sheet with Annexture -A(E). (Hakel, Iskira,Obo make) (With

Three year Gaurantee/warranty)

76 Providing Approved make Double Pole Cast Iron Clad Switch & rewirable Fuse 240 / 250 V confirming to IS. For 32Amp. Cat.iii 6.00 Nos 509.00 RS: Five

77 Providing Approved make Triple Pole Metal / Iron Clad Switch & Fuse with neutral link 415/500 V confirming to IS For 63 Amp. 4.00 Nos 1958.00 RS: One

Hundred Fifty Eight

78 Supplying & erecting 12 mm thick Hylam sheet of approved make and grade on 25 x 25 x 3 mm red oxide painted angle iron frame 2.00 Sq. Mtr. 2289.00 RS: Two

suitable for fixing ICDP SWITCH and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange required Thousand Two

No. of Energy meter & ICDP switch -busbar etc. as per Actual space available in electrical room at site) Hundred Eighty Nine

79 Providing, erecting, Fabricating the M.S. structure as per requirement of site as per structure design Including proper size approved 80.00 Kg. 72.63 RS: Seventy

by EIC of M.S. angles, flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI Make) complete with cutting, welding, Two and Paise Sixty

grinding and finishing duly painted with Asian/Nerolac make premium quality oil paint and true care red oxide metal primer,asian paint Three only

make with erection on site as per direction of engineer in charge with necessary grouting cementing, plastering and finishing complete.

All hole opening of square pipe end must be closed with M.S plate welding. Payment will be done on KG as per Actual weight.

80 Providing and erecting metalic danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S. 1.00 Each 69.00 RS: Sixty Nine

81 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured multistrand Copper conductor cable for 1100 volt to be laid 90 cms. 400.00 Mtr. 361.00 RS: Three

Under ground or to be laid on wall with suitable G.I.1.0 mm thick heavy guage cable clamp every 300mm or in existing DWC pipe/ Hundred Sixty One

Hume pipe/ trench underground or road crossing or floors(A) For 4 core 4 Sq. mm only

82a Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall 100.00 Mtr 125.00 RS: One

with necessary clamps or in existing trench / pipe of following size of cables For (a) 4 Core 6 Sq.mm Hundred Twenty Five

82b For 4 Core x 10 sq.mm. 50.00 Mtr. 139.00 RS: One

Hundred Thirty Nine

83a Providing & laying HDPE Double walled corrugated pipes (DWC) (conforming to IS: 16205 (part 24) 2018)) with minimum load 200.00 Mtr. 117.00 RS: One

required of 450N capacity with anti rodent and ultra violet material properties with necessary connecting accessories of same material Hundred Seventeen

at required depth to be laid 90 cms. under ground for laying of cable below ground / road surface for enclosing cable and back filling only

the same to make ground as per original. For Outer dia. 50 mm and Inner dia. 38 mm.

83b For 90 mm dia. 100.00 Mtr. 150.00 RS: One

84 Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & 120.00 Each 8.00 RS: Eight

connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. For (A) 1.5/2.5 to 6 Sq.mm only

85a Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & 80.00 Each 6.00 RS: Six

connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 2.5/4/6 Sq.mm only

85b For (B) 10 Sq.mm 16.00 Each 13.00 RS: Thirteen

86 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out 30.00 Each 33.00 RS: Thirty

going tails, insulating tape etc for following size of cables. For (a) (A) 2 to 4 core 2.5 / 4 Sq. mm Three only

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

87a Providing & fixing double compressed heavy duty flange type brass cable gland with rubber ring for P V C insulated armoured cable 20.00 Each 38.00 RS: Thirty Eight

complete with outgoing tails, insulating tape etc. For following size cables.For 2 to 4 core 6 Sq. mm only

87b For 2 to 4 core 10 Sq. mm 4.00 Each 38.00 RS: Thirty Eight

88a Providing and laying Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant 50.00 Mtr. 17.00 RS: Seventeen

PVC insulated conforms to IS:694, IEC - 227 erected in existing pipe of following size (Specifically for control panel, relays, power only

switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.One wire 1.50 sq. mm

88b For One wire 2.50 sq. mm 50.00 Mtr. 27.00 RS: Twenty

88c For One wire 4.00 sq. mm 80.00 Mtr. 37.00 RS: Thirty

88d For One wire 6.00 Sq.mm. 56.00 Mtr. 53.00 RS: Fifty Three

88e For One wire 10.00 sq. mm 91.00 Mtr. 87.00 RS: Eighty

89 SITC of specified make Cat - 6 voice /data cable to be done in prelaid PVC pipe / raceway , but without the cost of raceway or pipe ( 300.00 Mtr 47.00 RS: Forty

the wire is to be drawn from MFD/ JB to outlet point) (a) CAT - 6-Y Colour ( For Voice Cabling ) & X -Colour(For Computer Data Seven only

Cable ) .( Molex/Avaya/Systimax/Legrand make)

90 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support 20.00 Each 155.00 RS: One

network line speeds up to 1 Gbps Shall have RJ-45 jacks. For 1 Mtr. (Avaya / Molex / Dax make only) Hundred Fifty Five

91 SITC of company fabricated Patch cords shall conform to Cat- 6 & conductor shall be stranded for better flexibility Shall support 20.00 Each 199.00 RS: One

network line speeds up to 1 Gbps Shall have RJ-45 jacks. For 2 Mtr. (Avaya / Molex / Dax make only) Hundred Ninty Nine

92 Providing and Fixing SITC of Outdoor aesthetically designed LED Flood Light Luminaire with total consumption of Max. 120 W with 6.00 Each 7395.00 RS: Seven

single piece die cast aluminium housing, high power LED shall be mounted on high quality metal core PCB with extremely precison Thousand Three

designed heat sink complete with IP66 protection Class with polycarbonate / thoughened glass cover the fixture should be suitable for Hundred Ninty Five

pole/bracket mounting. The fixture to comply both LM79 and LM 80 guidelines with LED module min. 130 lumen/watt with toughen only

Glass L70 at 50,000 hrs, provided with high quality polycarbonate lenses for better light distribution. The Fixture Should be able to be

Pole Mounted and also bracket mounted, provided with high quality driver for protection against high and low Voltage cut Off,

opertional for high amibient and high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95. Also the Fixture

should meet the following technical criterias Oprating range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total lumens not

less then 13200, CCT > 5000K, CRI > 65, beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integral The

Separate Potted driver should have over current, over voltage protection, short circuit protection so that the fixture recovers once the

fault is removed. In addition to the above product should be operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH. (Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 4yrs free

replcement Guarantee for complete Fixture)

93 Providing , erecting , testing and commissioning Insu Intelligent Streetlight Controller specially design for energy saving in conventional 1.00 Each 19920.00 RS: Ninteen

streetlight system ( Cat. No. SLC-03-1Ph-7.5KVA-20Amp/Cat NoSLC-03-1 ph-15 KVA 20 amp per phase) having technial Thousand Nine

specification ,1 phase 2 wire, 230 V AC/ph +/- 25% R Y B N 2 Wire supply System.50 Hz (+ / - 10 %), 2 W (Stand By) to 4 W (at street Hundred Twenty

light operation)consuption, Advance 8 bit micro controller, switching on longitude and latitude base, accaracy of +- 1 minute per month. only

with inbuilt battery, with battery life of more than 8 years, with speicial device which hold the parameter for more then 10 years without

any power and password protected. 16 character and two line LCD display with backlight, 4 keys user friendly keyboard system,

VA feeder pillar capacity, 63/100 amps isolator ,3 Outpus with termination 40/63 Amps 2/3 pole contactor , 3X16 Amps with F R cable

provision to by pass by way of relay operation through auto/manual switch, 2 to 55 centigrade and humidity 90 % non condensing

Outdoor type installation on pole with clamps.(Provided with clamps and nut bolt) or wall or floor, three locking system flush type

internal panel lock, external pad lock and internal U clamp locking systems for against theft of panel. having 17/25 Kg weight ,16/18

guage MS weather proof with industrial exterior powder coated with 7 tank process RAL

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

Item No. Item Description Total Qty. Unit Rate in figures Rate in Words Total Amount

94 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box having size of 3.00 Each 890.00 RS: Eight

300mm x 200mm x 100mm [deep] complete with bakelite connector strip 4way & hinged doors having locking arrangements with Hundred Ninty

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box.(IF only

95 Providing and fixing of ABC Store type fire extinguisher suitable for extinguising A, B and C Fires Having capacity 6 Kg. Confirms to 3.00 Each 1991.00 RS: One

IS:15683:2006 with Mono Amonium Phosphate (MAP) Dry Chemical Powder, Brass Chrome cap, Fitted with 500 mm long hose, with Thousand Nine

wall mounting bracket. Detail specification of Fire Extinguisher are as per attached specification Annexure-I. Necessary certificate and Hundred Ninty One

guarantee must be given by Manufacture / Dealer on their letter head. [with necessary numbering / marking with oil paint by painter as only

instructions given by G.S.P.H.C.L engineer] [MINIMAX, KANEX, SAFEX, CEASE FIRE]

96 Providing and fixing of CO2 type Fire Extinguisher of capacity 4.5 kg. filled with Co2 Gas as per IS:15222 with controll discharge 3.00 Each 6526.00 RS: Six Thousand

mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS:15683 bearing ISI mark. Co2 cylinder as per Five Hundred Twenty

IS:7285. Write building name and block no. on each extinguiser. Detail specification of Fire Extinguisher are as per attached Six only

specification Annexure-I. Necessary certificate and guarantee must be given by Manufacture / Dealer on their letter head. [with

necessary numbering / marking with oil paint by painter as instructions given by G.S.P.H.C.L engineer] [MINIMAX, KANEX, SAFEX,

97 Dismantling the existing light, fan, bell, clock, independent plug point, wiring with mains of all types along with accessories etc. 226.00 Each 1.00 RS: One

Note:- Dismantled Materials to be retained by the Contractor

98 Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or angle iron frame. 5.00 Each 7.00 RS: Seven

99 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with accessories, G.I. down rod, frame etc. and 56.00 Each 9.00 RS: Nine

making the site clear. only

100 Dismantling the existing any type of indoor light fittings 122.00 Each 5.00 RS: Five

Total For ELECTRICAL (B)

Asst. Engineer (Ele.) Dy. Ex. Engineer (Ele.) (SP) Ex. Engineer (Ele.)

G.S.P.H.C.Ltd. G.S.P.H.C.Ltd. G.S.P.H.C.Ltd.

Ahmedabad Gandhinagar Camp. Gandhinagar