Development Of Monal Cafe Parking at Dhalpur.

Amount

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres. Pick Work & Jumper Work

Excavation in earth work and disposal of all excavated earth upto a lead of 20 metres and lift upto 1.50 metres, disposed earth to be levelled and neatly dressed: Spade work & Pickwork

Carriage of surplus earth through mechanical transportation including loading & unloading & stacking at site upto a lead of 2.00 km.

Stone filling behind retaining walls.

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in:Foundations and plinth.

Providing & laying cement concrete work having strength of M-30 grade mechanically mixed and vibrated and curing complete, excluding cost of formwork and reinforcement for reinforced concrete work. (a) In foundations, footings, bases of columns & the like & mass concrete.

(b) Walls (any thickness but not less than 0.10 m thickness) including attached pilasters buttersses, plinth & string coarses etc. From top of foundation upto floor two level.

(c) Suspended floor roofs landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor two level.

(d) Columns,pillars,posts and struts.

Extra for providing plasticizer / super plasticizer in RCC work of M-30 GRADE @ 1.70 Kg per Cu.m. of concrete including carriage of material in all leads and lifts.

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level Tor Steel

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters,buttresses,plinth and string courses and the like. (a) In foundations, footings, basis of columns etc. & mass concrete.

(b) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto 200mm. in thickness

(c)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

(d) Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor

(e) Columns, pillars, posts and struts (i) Square, rectangular or polygonal in plan.

(ii) Circular or curved in plan

(f) Edges of slabs and breaks in floors and walls Under 20 cm. Wide

Providing & laying PVC pipe 100 mm dia of Finolex Make for Weep holes in stone masonary, plain/ reinforced concrete walls extending through the full width of the structure with slope of 1(v) :20(H) towards drawing face complete as per drawing & technical specification clauses 614,709,1204.3.7 including carriage of materials in all leads & lifts.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded incement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint Top/centre hung Steel ventilators