Traffic safety by providing road safety work in Kundra - Nedumoncavu road ch 0/000-1/000

Amount

1 Appendix A Berm Protection work

12.1.B.1:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. <br> Ordinary Soil - Depth upto 3m - Mechanical Means <br>

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

55.23:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

2 Appendix B Traffic safety sign & road appurtenances

55.10.1:Providing and erecting retro-reflectorised Object Hazard Marker 300mm x 900mm <br>Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801.<br>300 mm x 900 mm

8.4.2:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.<br> 60 cm equilateral triangle

2.1.2:Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. <br> Girth from 600 mm to 900 mm

OD137066/2021-2022:Supplying and erecting LED solar blinker lights with micro controller based Blinker controller, pole and panel frame,pole cap,MS clamps for mounting of signal heads,300mm polycarbonate housing with door assembly, supply cable,300mm LED signal aspects,battery bank,Solar photo voltaic modules and charge control unit including erection , testing & commissioning etc.complete.

OD137120/2021-2022:Providing and fixing Convex mirror 100mm diameter supported on GI pipe pole 65mm diameter NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete min size 45cmx 45cm x 60 cm , 60cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer

OD137759/2021-2022:Supplying and fixing of LED solar-powered street lights with micro controller based light controller, pole and panel frame,pole cap,MS clamps for mounting of signal heads,300mm polycarbonate housing with door assembly, supply cable,battery bank,Solar photo voltaic modules and charge control unit including erection , testing & commissioning etc.complete.

Robin P Alex

Bidder Name

Robin P Alex

Niyazi Haneefa