R.I. Office cum Res at Sorda F.F._building

Earthwork in hard soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete.

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Cement Concrete (1:2:4) with 12mm size hard granite chips

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Cement Concrete (1:1.5:3) with 12mm size hard granite chips for RCC works

Iron work wrought ,put up in trusses and hoisting joists,trusses and placing in position including cost of all materials T&P required etc complete.

Providing, fixing of GCI sheets in roof including fixing of ridges and wind ties etc. complete but excluding cost of fitting

Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Supplied and fitting and fixing of Unplasticised Polyvinyl Chloride (UPVC) (FENESTA,/NCL VEKA LTD) . Three track -three panel sliding window -60- Series duly manufactured using UPVC reinforced profiles of 108 mm x 45mm x 2.5 mm for outer frames and window sash of 39 mm x 58 mm x 2.5 mm capable of muntingg single glazing system, structurally reinforcd with hot dip galvanised upto 50 mocrons of minimum thickness of 1.50 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6mm thick clear tougherned glass of SAINT -GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large Coupler at the site using anchor fasteners, sillicon rubber sealant, easy glazing/ deglazing at site etc., incluiding cost & conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D- 638-14, EN-477-95 and others applicable codes and standreds.

Laying of Interlocking concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.(Including M-30 Edge blocks of Both side)