ESTABLISHMENT OF SEED STORAGE GO-DOWN AT BHACHAU

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Providing and laying cement concrete 1:4:8 (1- Cement : 4-

coarse sand : 8- hand broken stone aggregates 40 mm

3 nominal size) and curing complete excluding cost of 40.00 2544.03 CMT

formwork in (A) Foundation and Plinth

Providing and laying controlled cement concrete M-200 and

curing complete including the cost of formwork but

excluding the cost of reinforcement for RCC work in Grade

Applying general insecticide pest control treatment to

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part-II(

5 (0.075% concentration by mass) is recommended 10.5ml 150.00 76.23 SMT

chemical diluted with 5 liters of water application 0.5 litre

chemical /Sqm of surface is recommended as per I.S.

Providing and laying controled cement concrete M-200

including finishing smooth with curing complete including

the cost of form work but excluding the cost of

reinforcement for RCC work in FOUNDATION-FOOTING

6 and mass concrete, including consolidation ,Vibrator and 35.00 4061.00 CMT

curing. Rates are also inclusive of Providing and mixing

Plasticizer of approved make in proportion prescribed by

Manufacturer etc complete as directed by EIC.

Providing and laying controled cement concrete M-200 and

including finishing smooth including consolidation with

vibrator and curing complete including the cost of form

work but excluding the cost of reinforcement for R.C.C.

7 work in GROUND LVL/PLINTH BEAM for any cross section 14.00 7397.00 CMT

area.Rates are also inclusive of providing and mixing

Plasticizer of approved make in proportion prescribed by

Manufacturer as directed by EIC.

Masonary work using Aerated light weight concrete block

having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in AAC Block Adhesive chemical

Mortar. ...ETC EIC

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and laying controled cement concrete M-200 and

including finishing smooth and including consolidation with

vibrator and curing complete including the cost of form

work but excluding the cost of reinforcement for R.C.C.

work for COPPING .Rates are also inclusive of providing and

mixing Plasticizer of approved make in proportion

prescribed by Manufacturer and directed by EIC.

Providing and laying controled cement concrete M-200

including finishing smooth and including the cost of form

work but excluding the cost of reinforcement for R.C.C.

work in COLUMN for any cross section area of column

10 including consolidation with vibrator and curing. Rates are 17.00 7233.00 CMT

also inclusive of providing and mixing Plasticizer of

approved make in proportion prescribed by Manufacturer

etc complete as directed by EIC. (a) Ground Floor

Providing and laying controled cement concrete M-200 and

including finishing smooth including consolidation with

vibrator and curing complete including the cost of form

work but excluding the cost of reinforcement for R.C.C.

work in LINTEL.Rates are also inclusive of providing and

mixing Plasticizer of approved make in proportion

prescribed by Manufacturer as directed by EIC. (a) GROUNG

Providing and laying controled cement concrete M-200 and

including finishing smooth including consolidation with

vibrator and curing complete including the cost of form

work but excluding the cost of reinforcement for R.C.C.

work in CHHAJJA for any floor levels including finishing the

exposed surface with cement mortar 1:3 to give a smooth

surface.Rates are also inclusive of providing and mixing

Plasticizer of approved make in proportion prescribed by

Manufacturer as directed by EIC.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited

layer by ramming and watering.

14 in layers of 20cm. thickness including watering, ramming 150.00 267.62 CMT

and consolidating etc. complete.

Masonary work using Aerated light weight concrete block

having crushing strength not less than 35 kg/sqcm for super

structure above plinth level upto floor two level in AAC

15 Block Adhesive chemical Mortar complete as per Technical 63.00 4277.31 CMT

Specification ..etc As per instructions and drawing or as

directed by engineer in charge

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and laying controled cement concrete M-200 and

including finishing smooth including consolidation with

vibrator and curing complete including the cost of form

work but excluding the cost of reinforcement for R.C.C.

16 work in PARDI and Beam for any cross section area.Rates 7.00 12541.00 CMT

are also inclusive of providing and mixing Plasticizer of

approved make in proportion prescribed by Manufacturer

as directed by EIC. (a) GROUNG FLOOR

Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork and

reinforcement for reinforced concrete work in (C) Beams,

up to all floor level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work

18 including bending, binding and placing in position complete 13518.00 75.46 KG

upto floor two level

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls for interior

19 plastering upto floor two level and finished even and 546.00 155.61 SMT

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

Providing & applying three coats (first two coats are with

brush and final coat is with roller) of premium plastic paint

of Asian or equivalent approved paint of desired shade for

internal wall surface / internal door windows, including a

priming coat with alkali resistant primer/cement (water or

solvent based) primer and applying required coats (min two

coasts) of readymade cement based wall putty of approved

20 make (Birla or j.k), brand and manufacture, on any surfaces, 546.00 158.00 SMT

at all heights, to give an even shade after thoroughly

brushing the surface free from mortar dropping and other

foreign matter and also including preparing the surface even

and sand papered smooth etc., after applying every coat of

putty, complete, as directed.

providing and laying average 20 mm. thick patali ( gutaka)

cement plaster on wall up to any height above ground level

and for all shapes consisting of average 12mm. thick backing

coat of CM 1:3 (1 cement: 3 coarse sand) and average 8mm.

21 thick uniform grained textured finish coat using wooden 455.00 269.81 SMT

Gutka, in CM 1:1 (1 cement: 1 sand), including scaffolding,

forming grooves, drip moulds, pattas, hacking RCC surface,

curing etc. complete.

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing & applying three coats (first coat with water base

primer, second cote acrylic paint with brush and final coat

with brush and roller) of external100% acrylic paint "apex

ultima" from Asian paint or equivalent approved with brush

on exterior surfaces at all heights & all places including

scaffolding to give even shades including thoroughly

brushing the surfaces free from mortar dropping and other

foreign matter and sand papered smooth etc complete as

per the manufacture's specification & to the satisfaction of

engineer in charge or architect. ( newly plastered surfaces

shall require three coats - first coat with 100% dilution &

two coats with 40% dilution or as specified by paint

manufacturer).(providing & applying three coats (first coat

22 with water base primer, second cote acrylic paint with brush 455.00 140.00 SMT

and final coat with brush and roller) of external100% acrylic

paint "apex ultima" from Asian paint or equivalent approved

with brush on exterior surfaces at all heights & all places

including scaffolding to give even shades including

thoroughly brushing the surfaces free from mortar dropping

and other foreign matter and sand papered smooth etc

complete as per the manufacture's specification & to the

satisfaction of engineer in charge or architect. ( newly

plastered surfaces shall require three coats - first coat with

100% dilution & two coats with 40% dilution or as specified

by paint manufacturer).

Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm

x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, vertical member of size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc complete for window

Providing & fixing self supporting mechanically seemed,

shall shaped roofing system made of 0.80 mm thick

Galvalume steel ( Colour Coated Aluminium-Zinc Alloy

Sheet (Galvalume) ASTM – A792, Grade D, Coating – AZ150 )

of Proflex / Spider or eq brand as per detail specification

complete in all respect as per architect's instruction.

(Outside Colour coating / Inside Colour coating: As per

instruction)

SCHEDULE-B1

Description of Item Qty. Rate Per Amount

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter-locked together through

their entire length and jointed together at the ends by end

locks mounted on specially designed pipe shaft with bracket

25 plates, guide channels and arragements for inside and 36.00 3700.98 SMT

outside locking with push pull operation including the cost

of hood cover and spring etc. complete.(A) Shutters having

width below 3.5 M.

Providind and applying trimix on C.C. surface including plate

vibrator as directed by EIC.

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

27 spacings and frame alround, square or round bars with 1320.00 100.17 KG

round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2

working pressure poluthene pipes of the following outside

Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

providing and fixing 30 mm thick solid core flush type door

with all core should be teak wood Patti and both side

decorative 4.0MM thick teak veneer finished( with pu

polish and fixed with granite framing include 150mm top

29 and bottom s.s. pivot and s.s. screws)and europa make 6.00 4546.00 SMT

tubular lock system including as per architect instruction

etc( flush door basic rate should be 160 rs /sq.ft and veneer

basic rate 95 rs/sqft). Complete.

Providing & fixing granite stone average 18 mm thick

machine-cut & machined polished stone in treads of steps,

sill, copings, parapet top, window sill, planter top, and such

other locations, laid on 20 mm(average) thick cement

mortar 1:4 (1 cement:4coarse sand) and jointed with Super

flex guranted fixing solution by kerakoll mixed with pigment

30 to match the shades of the slabs, including rubbing and 30.00 4006.00 SMT

polishing complete. The Stone used should be in one single

long piece up to 3000 mm as per drawing or as directed by

Engineer-in-charge. The exposed projected edges shall be of

uniform thickness and of uniform projection including

molding , chamfering, rounding, polishing complete.

Providing and fixing TURBO-VENTILATORS in roof with

water tite complete with filling silicon in the gaps of

31 reputed brand as per detail specification etc. complete as 2.00 10000.00 Nos

per architect's instructions and as per instrutions of E.I.C.

Total Rs.