General

Engaging of JCB with driver including hire charges and fuel charges and wages for drivers and helper etc,complete as per SS(Ground Clearing & Levelling)

Augoring and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911-1980 as per approved designs including all operations, incidental, labour charges, hire charges of Machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters - 1 Rmt.(Fro Bile size 300mm Dia)

Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including tremmy pumping,laying concrete,curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.(For Piles)

Supply and placing of the Design Mix Concrete for M-20 Grade corresponding to IS 456 using CONCRETE MIXER with 20mm H.B.G Metal including cost and conveyance of all Material like cement, Sand, water etc., to site, operational, incidental and Labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete (APSS No.402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete (BLD-CSTN-2-14)

Columns Above Plinth Beam

Roof Beam For Body Storage Room

Roof Beam For Rooms

Slab 150mm For Body Storage Room

Slab 150mm for Rooms(10'x12')

Lintel Beam All Around and Lintel Beam For Rooms

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing High Yield Strength Deformed (HYSD) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. ( APSS No.126)

Brick Masonary in C.M (1:6) using 2nd Class well burnt ground moulded traditional size bricks of locally available having a crushing strength of not less than 35 Kg./Sq.Cm & size of 23x11x7 Cm including cost & conveyance of Material to site, mixing of Cement Mortar & laying of bricks & mortar to specified thickness, watering, curing, including all scaffolding, hire & operational charges of Machinery, all Labour charges & all water lead charges etc. complete for finished item of work. (BLD-CSTN-3-1)

Plastering with C.M 2 coats, 12 mm thick, base coat 8 mm thick in CM (1:6), 4mm thick and top coat in CM (1:4), 4mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6-10)

Ceiling Plaster: Ornamental Plastering 12mm thick in two coats, first with 8mm thick in C.M (1:6) prop and second with 4mm thick in C.M (1:3) prop including cost and conveyance of all Material to site, Screening and mixing, laying finishing with sponge finish and watering, curing including all Labour charges ,hire and operational charges etc., complete for finished item of work - 10 Sq.M.

Flooring with vitrified tiles of 1st quality, set over base coat of C.M (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work (BLD-CSTN-7-5) - 10 Sq.M.

Providing Skirting / Dooding to internal walls to 15 cm height/risers of steps with ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of C.M (1:3) 12 mm thick with cement slurry of honey like consistency spread @ 3.30 kg/sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all Material like tiles, cement, sand and water etc., complete for finished item of work (BLD-CSTN-7-18) - 10 Sq.M.

Painting to the walls with 2 coats of Plastic emulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for Internal Walls and Celling. (Thrree Coats)

Painting to the walls with 2 coats of Acrylicemulsion paint of exterior Grade having VOC (Volatile Organic Compound) antain less than 50 Grams per liter of approved brand and shads including one coat of cement primer after throughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyaance of all materials to work site and all operational incidental, labour charges etc., complete for finished item of work as per SS 911 for External Walls. (Three Coats)

Supply and fixing Aluminium Anodised Doors - Single Shutter as per approved drawing with aluminium anodised sections of Jindal sections and outer frame top horizontals & both verticals of 20101 of size 101.6 x 44.45 x 3.18 mm Shutter frame top, bottom and verticals of 19501 of size 44.45 x 47.62 x 3.10 mm and Middle lock rail of 2001 of size 49.91 x 44.45 x 3 mm with plain clear float glass 5 mm thick fixed including supply and fixing aluminium handles of 100 mm for each shutter, floor springs/hydraulic door closure assembly and all Labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including Labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work (BLD-CSTN-11-31) - 1 Sq.M

Supply and fixing Aluminium Anodised Casement windows as per approved drawing with aluminium anodised sections of Series C Jindal Hollow sections and outer frame of 8804 of size 46 x 44 mm, Shutter frame of 8802 of size 44 x 46 mm and Mullion frame of 8803 of size 59 x 38 and glazing section of 4433 with plain clear float glass 6 mm thick fixed including supply and fixing aluminium powder coated 1 No.of casement friction stay hinges for each shutter, 1 Nos. aluminium handles of 150 mm for each shutter and all Labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including Labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work (BLD-CSTN-11-30) - 1 Sq.M.

Plastering in C.M (1:3) 12 mm thick including cost and conveyance of all Material, Labour for mixing Material, laying and curing etc., complete - 10 Sq.M. (BLD-CSTN-6.2)

Earthwork excavation in Ordinary soil by Manual Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(A)) - 1 Cum

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Flooring with high polished granite 16 to 18 mm mm thick slabs other than black set over base coat of C.M (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kg/sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all Material like cement, sand water and tiles, Labour charges for dressing of tiles etc., complete for finished item of work - 10 Sq.M. BLD-CSTN-7-7

Provision for Seigorage charges

Provision for NAC @0.10%

Provision for GST @ 18%

Provision for TPQA @0749%

Unforeseen Items

Total Estimate cost