Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.3 LAccepted-AOC | L1 | Accepted-AOC work comp. | |
| 2 | L2₹15.4 L+₹2,651.06 (0.17%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Qualified |
| Sl No | Description | Qty | Unit | IQBAL SINGH L1 | MOHAN SINGH L2 |
|---|---|---|---|---|---|
| 1.00 | Exvavation in foundations,trenches,etc., in earth work lift upto 1.50 mtrs.(one point five metre) Stacking the excavated soil not more than 3 mtrs.(three metre) Clear from the edge of the excavation and then returnning the stacked soil in 15cm.(fifteen centimetres)Layers, when required into plinths sides of foundation etc.,consolidating each deposted layer by rammin and watering and then disposing of all surplus excavated soil as directed with in a lead of 20(twenty) metres in pick and jumper work, includidng all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge. | 15.54 | Per cubic metre | 137 ₹2,128.98 Lowest | 139 ₹2,160.06 |
| 2.00 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete1:6:12 (one cement : Six coarse sand : twelve graded stone aggregate 20 mm(twenty milimetrs) nominal size) upto plinth level with :Cement mortar 1:6 (one cement: six coarse sand) ncluding all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge. | 12.39 | Per cubic metre | 5,252 ₹65,072.28 Lowest | 5,255 ₹65,109.45 |
| 3.00 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ncluding all leads, lifts and carriage of materials, as per thedirection and entire statisfection of Engineer-In charge. | 4.5 | Per cubic metre | 1,970 ₹8,865 Lowest | 2,000 ₹9,000 |
| 4.00 | Providing and laying 1:4:8(One Cement : four Sand :eight Graded stone aggregate 40 mm(forty milimetres) nominal size including curring complete but excluding the cost of form work and carriage of material in all leads and lift as per the emtire satisfaction of the Engineer- in- charge. | 4.75 | Per cubic metre | 5,200 ₹24,700 Lowest | 5,200 ₹24,700 Lowest |
| 5.00 | Brick work using common brunt clay building bricks in M-1:6.ncluding all leads, lifts and carriage of materials, as per thedirection and entire statisfection of Engineer-In charge. | 19.47 | Per cubic metre | 6,541 ₹1,27,353.27 Lowest | 6,541 ₹1,27,353.27 Lowest |
| 5.10 | Brick work using common brunt clay building bricks in M-1:6.Item 6.3.2 page 95 Brick work in ist floor | 17.15 | Per cubic metre | 6,790 ₹1,16,448.5 Lowest | 6,790 ₹1,16,448.5 Lowest |
| 6.00 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, (five centimetres to twenty centimetres) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge | 11.26 | Per cubic metre | 1,309 ₹14,739.34 Lowest | 1,309 ₹14,739.34 Lowest |
| 7.00 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°(fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm(twenty millimetres) nominal size) In Plinth beam and lintel beam long sides , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge. | 10.96 | Per cubic metre | 8,226 ₹90,156.96 Lowest | 8,226 ₹90,156.96 Lowest |
| 8.00 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechani cally Treated bars of gradeFe-500D or more. 5.22.6, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge. | 822 | Per kilograms. | 80 ₹65,760 Lowest | 80 ₹65,760 Lowest |
| 9.00 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers for all leads & lifts, all complete as per direction of Engineer-in-charge | 16.15 | per square metre. | 406 ₹6,556.9 Lowest | 410 ₹6,621.5 |
Tender Value
₹14.6 L
EMD Value
₹29,300
Closing Date
7 Jul 2022, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer HPPWD Division Paonta Sahib District Sirmour (HP)
Construction of HSC Dhaulakuan Tehsil Paonta Sahib Distt. Sirmour (HP) Under Deposit.
2022_PWD_62283_5
Tender/3092-3141 dated 17.06.2022
Open Tender
Civil Works - Buildings
Item Rate
180 days
Dhaulakuan
Please refer tender document
13 documents required · 13 mandatory
₹500
₹29,300
25 Jun 2026
1 Jul 2022
7 Jul 2022
1 Jul 2022
7 Jul 2022
1 Jul 2022
Amount
Exvavation in foundations,trenches,etc., in earth work lift upto 1.50 mtrs.(one point five metre) Stacking the excavated soil not more than 3 mtrs.(three metre) Clear from the edge of the excavation and then returnning the stacked soil in 15cm.(fifteen centimetres)Layers, when required into plinths sides of foundation etc.,consolidating each deposted layer by rammin and watering and then disposing of all surplus excavated soil as directed with in a lead of 20(twenty) metres in pick and jumper work, includidng all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete1:6:12 (one cement : Six coarse sand : twelve graded stone aggregate 20 mm(twenty milimetrs) nominal size) upto plinth level with :Cement mortar 1:6 (one cement: six coarse sand) ncluding all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ncluding all leads, lifts and carriage of materials, as per thedirection and entire statisfection of Engineer-In charge.
Providing and laying 1:4:8(One Cement : four Sand :eight Graded stone aggregate 40 mm(forty milimetres) nominal size including curring complete but excluding the cost of form work and carriage of material in all leads and lift as per the emtire satisfaction of the Engineer- in- charge.
Brick work using common brunt clay building bricks in M-1:6.ncluding all leads, lifts and carriage of materials, as per thedirection and entire statisfection of Engineer-In charge.
Brick work using common brunt clay building bricks in M-1:6.Item 6.3.2 page 95 Brick work in ist floor
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, (five centimetres to twenty centimetres) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°(fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills stair cases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm(twenty millimetres) nominal size) In Plinth beam and lintel beam long sides , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechani cally Treated bars of gradeFe-500D or more. 5.22.6, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers for all leads & lifts, all complete as per direction of Engineer-in-charge
Suspended floors, roofs, landings, balconies and access platform .
Edges of slabs and breaks in floors and 5.9.16.1 Under 20 cm wide
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm(one point six zero milimetres) thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm.(fifty into twenty five milimetres) or base ties of 1.60 mm,(one point six zero milimetres pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm.(two point five milimetres) thick with mortar guards, lock strike?plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge . Profile C Fixing with adjustable lugs with split end tail to each jamb metre , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm(twenty five milimetres to forty milimetres) thickSecond class teak wood , including all leads, lifts and carriage of materials, as per entire satisfaction of Engineer-in-charge.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3(three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm.(thirty five milimetres) thick including ISI marked Stainless Steel butt hinges with necessary screws , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing Aluminium Stoppers, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete,125mm dia(one hundred tenty five milimetres size) , including all leads. Lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
roviding and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.150x10 mm (One hundred fifty milimeters into ten milimeters size) , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete as per HPPWD specifications 1990 voume-I (one) including carriage of all labour equipements and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetres) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(at the rate of three point three kilograms per square metre) including grouting the joints with white cement and matching pigments etc., complete11.41.1 Size of Tile 500x500mm.(five hundred into five hundred milimetres), including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (one cement : three coarse sand), including pointing with white cement mortar 1:2 (one white cement : two marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately)8.1.1.2 Area of slab over 0.50 sqm(zero point five zero square metre), including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Kota stone slab flooring over 20 mm(twenty milimetres) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) 25 mm. (twenty five mililmetres) thick, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Tile work in skirting, risers of steps and dado upto 2 m(two metre) height over 12 mm (twelve milimetres) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm.(at the rate of three point three kilograms per square metre) including pointing in white cement mixed with pigment of matching shade complete.11.22.1.1, 8 mm (eight milimetres) thick , including all leads and lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charage.
12 mm. (twelve milimetres) cement plaster of mix : 1 : 6 (one cement: six fine sand) , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
15 mm. (fifteen milimetres) cement plaster on the rough side of mix 1:6 (one cement: six fine sand) ,including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
6 mm.(six millimetres) cement plaster of mix ceiling in cement mortar 1:3 (one cement : three sand), including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,(fifty grams per litre) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification,including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied, including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade . New work (two or more coats) over and including water thinnable priming coat with cement primer, including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre(fifty grams per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @1.43 litre/ 10 sqm.(at the rate of one point four three litre per ten square metre) Over and including priming coat of exterior primer applied @0.90 litre/10 sqm.(at the rate of zero point nine zero litre per ten square metre), including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 type A, including jointing with seal ring conforming to IS : 5382. leaving 10 mm (ten milimetre) gap for thermal expansion, (i) single socketed pipes 100mm(hundred milimetre) dia including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing plain bend 110mm (one hundred ten milimetre)dia sand cast iron S&S as per IS :1729 including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing collars plain 110mm(one hundred ten milimetre) dia sand cast iron S&S as per IS :1729 including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetres) of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty milimetres) nominal size), including cost of cutting holes and making good the walls etc. :17.37.1 For 100 mm.(hundred milimetres) dia pipe each including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty milimetres)nominal size) over 75mm.(seventy five milimetres) thick bed of dry brick ballast 40 mm.(forty milimetres) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Constuction of course rubble hammer dressed U shape open surface drain including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete with angle iron (50x50x6 mm.(fifty into fifty into six milimetre) for 5 nos.(five numbers). trusses main beams by taking double angle, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in -charge.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.50mm ( fifty milimeter ) G.I. pipes, including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Prepainted steel sheet roofing over trusses of Kolermetal or equivalent single skin trapezoidal profile sheet .6mm.(six milimetre) thick including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing Prepainted steel sheet Ridges with proper GOLA orhips .6mm thick 60cm.(sixty centimetre) over width including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing Valley 60 cm (sixty centimetre)overall .6mm thick prepainted steel sheet in roofing including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing M.S BP Sheet 1.66mm to 2 mm (one point six six milimetres to two milimetres) thick eaves board/facia/soffits & ceiling i/c cutting, fixing including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing 15 cm (fifteen centimetre)wide 45 cm(forty five centimetre) overall semicircular plain G.I. Sheet gutter with iron bracket 40 X 3mm(forty into three milimetre) size bolts and nuts including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing Partical board ceiling of approved quality with butt jointing and nail cement bonded particle board 12mm.(twelve milimetre) thick, including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Steel work welded in built-up section, trussed & framed work including cutting, hoisting and fixing in position In grating, Framed guard , bars ladders, railing, brackets & similar work. Ballusters of railing 19 X 19 mm (nineteen into nineteen milimetres)solid square bars including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing MS round holding down or anchor bolts with nuts and washers including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm.(hundred milimetre) sand cast Iron P or S trap, 10(ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm(five hunhdred eighty into four hundred forty milimetre) with integral type foot rests , including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-charge.
Providing and fixing wash basin with C.I. brackets, 15 mm.(fifteen milimetres) C.P. brass pillar taps, 32 mm.(thirty two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.including all leads, lifts and carriage of materials, as per the entire satisfaction of Engineer-in-chargae.
Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm (one thousand five hundred into four hundred fifty milimetres)including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm.(fifteen milimetres) nominal bore including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm(forty five centimetre) length 15 mm. (fifteen milimetre) nominal bore including all leads, lifts and carriage of materials, as per the direction and entire statisfection of Engineer-In charge.
MOHAN SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .