C.O Science Bock Lab and Classroom of Govt. Sr. Sec. School Building at Duttnagar in Tehsil Rampur Distt. Shimla H.P.

Amount

Cutting in earth work and disposal of all excavated earth upto a lead of 20 meters and lift upto 1.50meters,and disposed earth to be levelled and neatly dressed; Pick Work /Jumper Work , within all leads and lifts in all kinds of soil complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead up to dumping site of 50 m. in all kinds of soil, complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including carriage of materials in all leads and lifts and as per drawings and technical specifications and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts complete as per drawings and technical specifications and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filing brick bats in soakpit including carriage of materials within all leads and lifts complete as per drawings and technical specifications and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and filing crushed stone aggregate in soakpit of 25mm (Twenty Five Millimetre) and 20mm (Twenty Millimetre) nominal size including carriage of materials within all leads and lifts complete as per drawings and technical specifications and as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden/steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work comlete upto all floor level including entire carriage of materials in all leads and lifts as per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Foundation footing and basis of columns, etc. and mass concrete.

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Stairs, (excluding landings) except spiral staircases

Edges of slabs and break in floors and walls :- Under 20cm wide

Vertical surfaces such as walls (any thicknes) partitions and the like including attached pillasters buttresses, plinth and string courses and the like.

Providing and laying cement concrete 1:6:12 (One cement : Six coarse sand: Twelve graded stone aggregate 40 mm (Forety Millimetre) nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : Four coarse sand: Eight graded stone aggregate 40 mm (Forety Millimetre) nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability. within all leads, lifts and other incidential charges, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. All works upto plinth level

All works above plinth level upto floor all level

Providing and laying cement concrete work 1:1½.:3 (One cement : One and half sand : Three graded stone aggregate 20 mm (Twenty Millimetre) nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete. All work upto plinth level including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : cement concrete work 1:1½.:3 (One cement : One and half sand : Three graded stone aggregate 20 mm (Twenty Millimetre) nominal size) including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : One point five sand : Three graded stone aggregate 20 mm (Twenty Millimetre) nominal size) including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying upto all floor levels cement concrete work 1:1½.:3 (One cement : One and half sand : Three graded stone aggregate 20 mm (Twenty Millimetre) nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete ;:-Moulding as in cornices, window sills etc. exceeding 15cm in girth.including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. String courses, copings, bed plates, anchor blocks, plain windows sills and the like :

Moulding as in cornices window sills etc. not exceeding 15cm in girth.

Providing and laying Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all floor level including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (One cement : Two coarse sand : Four graded stone aggregate 20 mm (twenty Millimetre) nominal size) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm (Six Millimetre) thick cement mortar 1:3 (One Cement : Three fine sand). including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying cement slurry on R.C.C slab or cement concrete work using 2.75 Kg (Two point Seventy Five Kilogramme) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete . including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 40 mm (Forety Millimetre) thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement including carriage of materials within all leads and lifts. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including carriage of all labour equipments and materials to various location through all modes of transportation in: Cement mortar 1:6 (One cement : Six coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (One cement : Six coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Rat Trap Brick work laid on edge with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes with Cement mortar 1:4 (One cement : Four coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. including carriage of all labour equipments and materials to various location through all modes of transportation . with Cement mortar 1:4 (One cement : Four coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level.with Cement mortar 1:4 (One cement : Four coarse sand) including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in walls in cement mortar 1 : 4 ( One cement : Four sand) and including rakingout joints in:-.Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in walls in cement mortar 1 : 4 ( One cement : Four sand) and including rakingout joints in:-.Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 35 mm thick Factory made flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws ISI marked conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including black enameled M.S. stainless steel butt inges.with necessary screws Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters 40 mm thick Second class deodar wood-using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including first class deodar wood ornamental beading 20 mm X 12.5 mm section including bright finished black enamelled iron butt hinges with necessary screws Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters 40 mm thick Second class deodar wood using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm for doors, windows and clerestory windows including first class deodar wood ornamental beading 20 mm X 12.5 mm section including bright finished black enamelled iron butt hinges with necessary screws Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (Ninteen Millimetre) thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete .Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 19 mm (Ninteen Millimetre) thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete . Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 6 mm (Six Millimetre) thick ply wood lining with butt jointing and nails. Framework and cover fillet to be measured and paid for separately.Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm (One Millimetre) thick Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing square edges 1st class deodar wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 12 mm (Twelve Millimetre) thick green chalk board with superior quality framming specialy anodized aluminium profile 20 X 15 mm with corner of black plastic shallbe provided. The board surface shall be non-porus ceramic particle on the top green surface for smooth writing with chalk over 11 mm thick particle board which shall have backing materials of galvanised sheet 28 mm thick approximately. The board shall be fixed on the special designed clamp and square clamps with the help of nylon plugs and screws as per site requirement. Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick,60x60 grid mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc.Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.63mm thick P.G.I sheet lining (back side of toilet/SDB shutter) with approved adhesive and necessary screws etc. complete Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .

Providing and fixing Anodized Aluminium sliding door bolts with bolts and nuts etc. complete. Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. . 300x16mm (three hundred into sixteen millimeter)

250x16mm (two hundred fifty into sixteen millimeter)

Providing and fixing Anodized Aluminium tower bolts (Berrel type) transparent or dyed to required shade and colour with screws etc. complete .Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. . 250x10 mm (two hundred fifty into ten millimeter)

200x10 mm (two hundred fifty into ten millimeter)

150x10mm (one hundred fifty into ten millimeter)

Providing and fixing Anodized Aluminium handles transparent or dyed to required colour or shade with necessary screws etc. complete . Including carriage of material within all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 125mm (one hundred twenty five millimeter)

100mm (one hundred millimeter)

75mm (one hundred millimeter)

Providing & fixing Aluminium hanging floor door stopper Twin Rubber stopper ISI marked with transparent or dyed to required shade and colour with screws etc. completeto suit shutter thickness complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 65x35mm (Sixety Five into Thirty Five) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete. including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 50 mm (Fifty Millimetre) CP brass cup board or ward robe knob with nuts complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete. including carriage of materials in all leads and lifts As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 115 mm (One Hundred Fifteen) bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium hooks and eyes with necessary screws including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One Hundred Fifty) MS single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 150 mm (One Hundred Fifty) MS double acting spring hinges bright finished with necessary screws etc. complete. including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (Twenty Millimetre) dia chromium plated brass curtain rod having wall thickness of 1.25mm (One point twenty five) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Laying mirror polished Kota stone slab of size 55x55 CM (Fifty Five into Fifty Five Centimetre) of uniform colour in flooring and treads of steps over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : complete as per architectural drawing and direction of Engineer-in-charge i/c carriage of materials within all leads and lifts. 25 mm (Twenty Five Millimetre) thick including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Fixing Mirror polished 20 mm (Twenty Millimetre) thick Kota stone slabs of size 55x55 cm (Fifty Five into Fifty Five Centimetre) in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Fixing Precast terrazo tiles 22 mm (Twenty Two Millimetre) thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Medium shade pigment using 50% white cement and 50% ordinary cement including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Fixing Precast terrazo tiles 22 mm (Twenty Two Millimetre) thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :-Medium shades pigment using 50% white cement and 50% ordinary cement including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10 mm (Ten Millimetre) thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) as per IS : 4457, complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 10 mm (Ten Millimetre) thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement in dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) as per IS : 4457, complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Fixing 40 mm (Forety Millimetre) thick rubbed Red mandana stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.Red mandana sand stone complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 1st quality white /coloured glazed wall tiles 30X45cm (Thiry into Forety Five Centimetre) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade completeincluding carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 20 mm (Twenty Millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 20 mm thick Jet Black Granite Stone including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing edge moulding to 20 mm thick granite stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for fixing granite stone, over and above corresponding asic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Extra for making pre finished nosing in treads of steps of Granite/Kota/Marble stone/Sand stone slab including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over subbase of concrete with 25 mm thick average thickness of cement mortar 1:4( 1 cement : 4 sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complet Subbase concrete floor to be paid for separately. 60 mm (Sixty Millimetre) thick interlocking paver block including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Unistone/ Garsa slate stone 12mm (Twelve Millimetre) cladding on walls / R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing and fixing 0.60mm (Point Sixty Millimetre) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required 0.60 mm ( zero point sixty millimetre) thick sheet complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government...

Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required 0.60 mm ( zero point sixty millimetre) thick sheet .complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of a TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required 0.60 mm ( zero point sixty millimetre) thick sheet .complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design.including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government..

Providing and fixing on wall face PVC 150 mm (One hundred fifty Millimetre) dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face PVC accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One Hundred Fifty Millimetre) dia PVC door bend

150 mm (One Hundred Fifty Millimetre) dia PVC plain bend

150 mm (One Hundred Fifty Millimetre) dia Plain Shoe

Providing and fixing M.S. holder bat clamps 150mm (One Hundred Fiftty Millimetre) dia of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc. complete including carriage of materials in all leads and lifts.As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work including riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. In truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. MS Tube

Providing and fixing single rebate door frame manufactued from ISLC 75 mm (Seventy Five Millimetre) (with MS Flat 75X4 mm for centre frame) & MS hollow section for rebate 40X12 mm and 1.5 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete. side/end mullion including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing double rebate door/window frame manufactued from ISLC 125 mm (One hundred twenty five millimetre) ( with MS Flat 125X50 mm for cenrte frame) & MS hollow section for rebate 40X20 mm and 2.00 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. side/end frame

Center/ mullion frame

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Applying priming coat on new concrete / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand tapering as required with ready mixed primer complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Painting with Satin enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

6mm (Six Millimetre) cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts in all floor levels complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15mm (Fifteen Millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth . 1:6 (1 cement: 6 coarse sand) Rough Side complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen Millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth . 1:6 (1 cement: 6 fine sand) Fair Side complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen Millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth . Cement mortar 1:4(1 cement : 4 sand) complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

15 mm (Fifteen Millimetre) cement plaster 1:4 (1 cement: 4 coarse sand) finished with a floating coat of neat cement on rough side of single or half brick wall. Cement mortar 1:4(1 cement : 4 sand) complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing walls with Acrylic Smooth exterior paint of required shade ,brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering two or more coats on undecorated ceiling with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Distempering two or more coats on undecorated wall with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts. 20 mm nominal bore complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 15 mm (Fifteen Millimeter) dia nominal bore

20mm (Twenty Millimeter) nominal bore

Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately). 20mm nominal bore complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of various capicityand making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Net capacity complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :including carriage of materials within all leads and lifts. With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 1216 mm (16 mm O.D. pipe) INTERNAL WORK - EXPOSED ON WALL

1620 mm ( 20 mm OD pipe).

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 1216 mm (16 mm O.D. pipe)

1620 mm ( 20 mm OD pipe).

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints External Work complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 1216 mm (16 mm O.D. pipe)

1620 mm ( 20 mm O.D. pipe).

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing weep holes with 110 mm dia PVC pipes laid in Slope of 1:20.including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm x 90 mm complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm x 110 mm (One hundred fifty into one hundred ten) dia

110 mm x 90 mm (One hundred ten into ninety) dia

Providing and fixing PVC cowl including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred Fifty Millimeter) dia

110 mm (One hundred Ten Millimeter) dia

Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.110mm (One hundred Ten millimeter) including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cutting Chase in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm (One hundred millimeter) dia. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china water closet squatting pan (Indian type) (Earthwork, bed concrete and traps to be measured and paid for seperately . Orissa Pan W.C.No. 2071 of Cera with integral type foot rests complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china (European type/ wash down type) water closet pan with integral "P" or "S" trap. European Seat No 2090 EWC of PRIMA complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : Solid Type :- White solid plastic seat with lid complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Flat back :- White Vitreous China Wash basin No.1025 (CLAIR) of Cera of size 550x400 mm with a pair of 15 mm C.P. brass pillar taps complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal for wash basin completely ecessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Laboratory sink size 55x40x18 cm IS No-1355 of Hindware

Laboratory sink size 55x40x18 cm IS No-894 of Hindware

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Flat back urinal Large No 60002 of hindware with 5 litre P.V.C.automatic flushing cistern complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mm x 300mm white vitreous china division plate for urinal. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia Flexible pipe complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 100 mm CP grating for Nahani / gully / Floor trap complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 600mmx450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws.600 X 20 mm complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screwscomplete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 with flenge: 15mm dia complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts :- 15mm dia complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm dia complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe (heavy duty ISI marked IS:8931& 8934) with brass unions including carriage of materials with all leads and lifts : 45cms length 15mm nominal bore complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing brass full way valve with wheelcomplete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 15mm nominal bore :-

20mm nominal bore :-

Providing and fixing PTMT ball way valve( horizontal plunger type) high pressure with polythene plastic floats:. 15mm nominal bore complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P Bottle trap (heavy duty ISI marked I.S No 8931 & 8934) for wash basin and sink complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15mm dia complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 80 mm long, weighing not less than 46 gms complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 150 mm dia ( to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches. complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials within all leads and lifts :- LD- 2.5 Rectangular shape 610x455 mm internal dimensions complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing 300 mm X 300 mm cast iron cover with frame for gully trap complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supply and fixing 455mmx610mm rectangular(HD560 ).precast C.Con cover With Frame of NTC make or Equivalent complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement ccomplete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern):

Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof complete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channelscomplete including carriage of materials in all leads and lifts. As per drawings and technical specifications, as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

MILAP SINGH THAKUR (BID ID -496136)