SPECIAL REPAIR OF WOODEN AND STEEL FURNITURE AGAINST BER FURNITURE ITEMS AT AHMEDABAD CANTT

CHAIR VARANDAH (FD/MAP-II/06) The overall size of the chair shall be 455mm wide 455mm deep and 940mm high. The frame of the chair shall be of 19mm dia MS tube of wall thickness 1.6mm duly powder coated. The seat and back of the chair shall be of PVC 4mm of weight not less than 1.85 kgs and grooves 90x10mm ten in nos on seat and back. One stiffener 19mm dia MS tube shall be provided in between the front legs as shown in drg. An additional support in seat and back shall be provided at centre between the seat and back duly welded for rest of PVC seat irrespective of what is shown on drg. Rubber shoes of best quality shall be provided to each end of legs.Rest all as per drg.

PEG TABLE (FD-384) DIMENSION;Overall size shall be 450mm long,300mm wide and 380mm high. DESCRIPTION:Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table. FINISH:All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg.

TEAPOY (600mmx450mmx540mm) (FD-382) (a) Teapoy shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. (b) Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout except the top, which shall be of melamine faced pre-laminated particle board 18mm thick exterior grade having ISI marking on the edges. Exposed edging of board shall be covered with 4mm thick teak wood edging around as directed by GE. (c) Rubber Ring: Rubber ring shall be hard and of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. (d) Finishes: All wooden surfaces exposed to view shall be French polished except inner side of top which shall be painted with one coat of synthetic enamel paint (Shade as approved by GE) Ist quality over a coat of pink primer. (e) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.

TABLE WRITING FD-275 DIMENSION:Overall size shall be 1145mm long, 600mm wide and 760mm high. DESCRIPTION:All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. The top shall be of 18mm thick prelaminated MDF board of approved shade and the edges shall be covered with 4mm thick teak wood beading. Two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawer and cabinet shall be 18mm thick prelaminated particle board exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6 mm thick plywood commercial.6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter.25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg.

CHAIR EASY (FD-229) DIMENSION: Overall size shall be 510 mm long, 575mm wide and 720mm high . DESCRIPTION:- All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame |Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs. FINISH:- All wooden surface exposed to view shall be French polished.

RECEPTICLE PVC (FD/E6/MAP/13) The body of receptacle PVC shall be made up of thick polymer plastic .It shall be of capacity 35 liters, provided with lid and handle as shown in drg.

TABLE DRESSING LADIES INCL STOOL MAP (FD/MAP-II/07) The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. The sides, top ,back and front of the base unit shall be of 18mm thick prelaminated MDF board. The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back drawers shall be of 12mm thick prelaminated MDF ,bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board.5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF .The top of the stool shall be of 12mm thick plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.Rest all as per drg.

BATH MAT PVC (FD/E6/MAP/07) The Bath Mat PVC shall be made up of 5mm thick PPCP material .The size of the bath mat shall be 400mm Lx300mm Wx250mmH.The bath mat shall have centre leg of dia 25mm.The four legs shall be in arc shape and of size 10mmx100mm.The top of the bath mat shall have 3mmx10mm thick stiffener moulded along with the seat in single piece underneath. The weight of the bath mat shall not be less than 1.3 kgs. Make-AMKO or Cello.

TABLE DINING 4 PERSONS ( 1200x900x760mm) (FD/MAP-II/03) (a) Table dining shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS. (b) Timber: All wood work shall be kiln seasoned and chemically pressure treated Ist class hard wood (Teak) throughout except the top which shall be made of melamine faced pre-laminated MDF board 18/ 19mm thick bonded with phenol formaldehyde as per as per IS-3087-1985 exterior grade BWR type and shall be ISI marking on the edges. Exposed edges of board shall be covered with 6mm thick teak wood beading and shall be fixed as specified. (c) Finishes: All wooden surface exposed to view shall be French polished. (d) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.