ADDITION AND ALTERATION OF MULTIPURPOSE SHED NEAR CLK NEW OTM ACCN OF RECORD GARH RIF UNDER AGE I LANSDOWNE

Amount

Excavation in post holes (or similar holes) Each n exc 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm,watering and removing surplus soil to a distance of n exc 50m and making good surface in hard/dense soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L for Surface dressing not exceeding 15 cm deep as in hard /dense soil and removing surplus soil to a distance of n exc 50m and making good surface in hard/dense soil complete all as specified and directed., complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in path/sub base etc, laid in panels, finishing the surface even and rough to receive the top layer, complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 17 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and mirrior polishing over and including 15 mm thick screed bed or bedding layer in Cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in cills, coping, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces cleats etc conforming to Fe-410-W Gde-E-250 quality-B, complete all as specified and directed.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed.

M&L rolled mild steel plates ( Plain or chequered) channels , square cut to notched ( ordinary and counter sunk) forming holes, without any attachmenmt complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as Specified & directed by GE/Eng-in-Charge.Make - Tata Durashine , JSW Colouron+ or equivalent in Roffit( Shiv Shakti Fibre Udyog)

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ- 150) as in ridges, hips, valleys/rain water / roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make - Tata Durashine , JSW Colouron+ or equivalent in Roffit( Shiv Shakti Fibre Udyog)

M&L for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

PIONEER REFRIGERATION AND ELECTRICALS