BUILDING WORK

Name of Work :- (Rashtriya Gram Swaraj Abhiyan) (Package) Construction of

Panchayat Ghar at Village Shukaltirth and Tankariya Ta. & Dist. Bharuch

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rates in Total

No. Figure Amount

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 366.00 Cum 203.83

of useful materials and disposing the excavated stuff within all lead and lift for all

2 Filling in plinth with sand under floors including excavated watering, ramming, 80.00 Cum 460.19

consolidating and dressing etc. complete

3 Providing and laying cement concrete 1:4:8 (1- cement : 4 coarse sand : 8 42.00 Cum 2729.02

graded stone aggregates 40 mm nominal size) and curing complete excluding

cost of formwork in foundation and plinth.

4 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 46.00 Cum 4825.78

graded stone aggregate 20 mm nominal size) and curing complete excluding

cost of form work and reinforcement for reinforced concrete work in foundation,

footings, columns and mass concrete.

5 Providing and laying brick work using common burnt clay building conventional 42.00 Cum 4021.02

type bricks having crushing strength not less than 35 Kg./Sq.cm. in foundation

and plinth in cement mortar 1:6 (1 cement : 6 fine sand) including the cost of all

materials and labour charges etc. complete.

6 Providing and laying brick work using common burnt clay building conventional 110.00 Cum 4061.21

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above plinth level in cement mortar 1:6 (1 cement : 6 fine sand)

including the cost of all materials and labour charges etc. complete.

7 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 6.00 Cum 10647.53

graded stone aggregate 20 mm nominal size) for RCC lintel including finishing

smooth with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement.

8 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 42.00 Cum 8091.15

graded stone aggregate 20 mm nominal size) and curing complete including cost

of form work in beam having cross sectional area 0.08 to 0.12 sq.m.

9 Providing and laying cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 4.40 Cum 6760.46

graded stone aggregate 20 mm nominal size) for reinforced concrete chhajjas

not exceeding 10 cm. thickness upto floor two level including finishing the

exposed surfaces with cement mortar 1:3 (1 cement : 3 fine sand) to give a

smooth and even surface centering and form work and curing complete

excluding cost of reinforcement.

10 Providing and laying ordinary cement concrete 1:1.5:3 (1 cement : 1.5 coarse 48.00 Cum 7313.70

sand : 3 graded stone aggregate 20 mm nominal size) and finishing the smooth

with curing etc. complete including the cost of form work but excluding the cost

of reinforcement for RCC work in Slabs having more than 10 cm and upto 13 cm

11 Providing and laying ordinary cement concrete 1:1.5:3 (1 cement : 1.5 coarse 12.00 Cum 12201.04

sand : 3 graded stone aggregate 20 mm nominal size) and finishing the smooth

with curing etc. complete including the cost of form work but excluding the cost

of reinforcement for RCC work in (II) COLUMNS (i) Having cross sectional area

12 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 17340.00 Kg. 76.21

including bending, binding and placing in position complete for all floor level.

13 Providing 15mm thick cement plaster in single coat on brick / concrete wall for 908.00 Sq.m. 235.92

interior plastering upto floor two level finished even and smooth in cement

mortar 1:3 (1-cement : 3 sand) including floating coat of cement slurry etc.

It. Item of Work Qty. Unit Rates in Total

No. Figure Amount

14 Providing 10mm thick cement plaster in single coat on brick / concrete wall for 300.00 Sq.m. 140.16

interior plastering upto floor two level finished even and smooth in cement

mortar 1:3 (1-cement : 3 sand) etc. complete for ceiling.

15 Providing 20 mm thick sand faced cement plaster on walls upto height 10 meters 610.00 Sq.m. 329.29

above ground level consisting of 12 mm thick backing coat of C.M.1:3 (1 cement

: 3 sand) and 8 mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) and

curing etc. complete.

16 Providing and laying 24” x 24” Vitrified 8 mm thick tiles flooring over 20 mm (avg) 180.00 Sq.m. 1415.77

base of C.M. 1:6 on new surface or fixing on excluding flooring by adhesive

material including dismentalling of excluding flooring & jointed with colour

cement slurry finished with flush pointing & cleaning the surface etc. complete

for light shade.

17 Providing and laying Vitrified tiles 8 to 10 mm thick in skirting, risers of steps and 16.00 Sq.m. 1141.45

dedo on 10 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

18 Providing and laying 24” x 24” Vitrified 8 mm thick tiles flooring over 20 mm (avg) 82.00 Sq.m. 1397.83

base of C.M. 1:6 on new surface or fixing on excluding flooring by adhesive

material including dismentalling of excluding flooring & jointed with colour

cement slurry finished with flush pointing & cleaning the surface etc. complete

19 Providing and laying broken china mosaic flooring for terrace using 12mm to 106.00 Sq.m. 747.29

20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out up to surface using white

cement including rounding off junctions and extending them up to 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

20 Providing and laying white glazed tiles 6mm thick in flooring treads of steps and 11.88 Sq.m. 916.27

landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand) finishing with flush pointing in white cement.

21 Providing and laying white glazed tiles 6mm thick in skirting risers of steps and 60.00 Sq.m. 946.50

dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

22 Providing and fixing 35mm thick shutters for doors, windows and clearstory 32.00 Sq.m. 5338.30

window including Indian teak wood frames 10cm x 7cm size including anodized

alluminium fixtures and fastening including primer coat of approved quality and

two coat of oil painting etc. complete (ii) Fully panelled.

23 Providing and fixing window having extruded aluminum colour anodized section 28.80 Sq.m. 1583.95

frame main outer size 95mm x 24mm x 1.17mm (@ wt. of 0.738 kg/mt),

horizontal three track member size 92mm x 31.75mm x 1.30mm (@ wt. of

Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (@ wt. of

Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm

(@ wt. of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (@ wt.

of 0.456 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass

partly fix and partly sliding with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. complete.

24 Providing and fixing window having extruded aluminum colour anodized section 7.20 Sq.m. 1713.70

frame main outer size 63.50 mm x 38.10 mm x 1.95mm (@ Wt. 1.094 Kg/ mt)

horizontal four track member size 61.85 mm x 31.75 mm x 1.20 mm (@ Wt.

0.695Kg/ mt) vertical member of size 61.85 mm x 31.75 mm x 1.30 mm (@

Wt.0.0.659 Kg/ mt) with sliding shutters of horizontal member size 40 mm x

mm x 1.29 mm (@ wt. of 0.456 Kg/ mt) vertical member of size 40 mm x 18 mm

x 1.29 mm (@ Wt. of 0.457 Kg/ mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminium silicon sealant glass fixing to

frame as per details etc. complete.

25 Providing and fixing standard extruded of alluminium section of size 63mm x 3.00 Sq.m. 1175.56

38.10 mm x 1.20 mm (@ Wt. 0.643 Kg/mt) with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc. complete for

It. Item of Work Qty. Unit Rates in Total

No. Figure Amount

26 Applying two coats of putty & two coats of primer of approved brand and 1176.00 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

27 Wall painting (three coats) with plastic emulsion paint of approved brand and 1176.00 Sq.m. 119.42

manufacture on undecorated wall surfaces to give an even shade including

thoroughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

28 Finishing wall with weather proof exterior emulsion paint on wall surface (two 654.00 Sq.m. 114.53

coats) to give an required shape even shade after thoroughly brushing the

surface to remove all dirt and remains of loose powdered materials etc.

29 Providing & fixing water closet squatting pan (Indian type W.C. Pan) size 580 6.00 No. 948.09

mm (Earthwork, bed concrete, foot rests and trap to be measured and paid for

separately) (A) Vitreous china (I) In white colour

30 Providing and fixing 100 mm size P or S trap for water closet squatting pan 6.00 No. 329.29

including jointing the trap with the pan & soil pipe in cement mortar 1:1 (1

cement : 1 fine sand) (A) Vitreous China.

31 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 4.00 No. 1804.97

brackets painted white including cutting holes and making good the same but

excluding fittings.(A) Vitreous China (II) Flat back washbasin 550 mm x 400 mm

size (I) In white colour including C.P. brass west, waste pipe, stop tap.

32 Providing, laying and jointing in true line and level I.S.I. mark U.P.V.C (Sch-40) 80.00 Rmt. 72.65

for cold water including fitting as approved by Engineer in charge. Pipe shall be

fixed on the wall with held of clamp at every two meter c/c shall be concealed or

open as directed including necessary fitting etc. including testing of pipe and

joints and fixing the same with adhesive solvent including cost of all materials.

33 Providing, laying and jointing in true line and level I.S.I. mark U.P.V.C (Sch-40) 200.00 Rmt. 91.84

for cold water including fitting as approved by Engineer in charge. Pipe shall be

fixed on the wall with held of clamp at every two meter c/c shall be concealed or

open as directed including necessary fitting etc. including testing of pipe and

joints and fixing the same with adhesive solvent including cost of all materials.

34 Providing and fixing screw down bib taps of following size. (A) Brass screw 10.00 No. 214.81

down bib tap polished bright. (ii) 20mm dia. as directed by Engineer in charge.

35 Providing and fixing PVC SWR Nahni trap Is 14735 for drain 100 mm diameter 6.00 No. 558.36

with jali of the following nominal diameter of self cleaning design with C.I.

screwed down or hinged grating including the cost of cutting and making good

36 Providing and fixing S.W. Gully trap with C.I. grating brick masonry chamber and 4.00 No. 1292.19

water tight C.I. cover with frame of 300 x 300 mm size (inside) with standard

weight (i) square mouth traps (A) 100 mm x 100 mm size P type.

37 Providing and fixing to wall, ceiling and floor 10.0 kg.F/cm2 (U.P.V.C.) working 100.00 Rmt. 277.43

pressure polythelene pipes of the following outside dia. low density, complete

with special flange compression type fittings, wall clips etc. including making

good the wall ceiling and floor. (F) 75mm dia.

38 Providing and fixing to wall, ceiling and floor 10.0 kg.F/cm2 (U.P.V.C.) working 100.00 Rmt. 336.24

pressure polythelene pipes of the following outside dia. low density, complete

with special flange compression type fittings, wall clips etc. including making

good the wall ceiling and floor. (G) 110mm dia.

39 Construction underground sock well 1.50 m diameter & 3 mt in depth with honey 2.00 No. 22596.73

comb brick masonary having crushing stg. not less than 35 Kg/ sqmt in C.M. 1:5,

0.35 m thick at bottom 1.50 mt & 0.23 mt thick 1.00 m of honey comb masonary

and 0.23 m thick 0.50 m ht. at top level RCC 1:2:4 slab 0.10 m thick of top

including inspection gap 0.60 m x 0.45 m and cover ready made F.R.C. cover

whole work as per instruction of Engineer in charge etc. complete.

It. Item of Work Qty. Unit Rates in Total

No. Figure Amount

40 Construction of an underground masonary water tank of size 2m x 1m x 1m & 4000.00 Litre 15.38

2000 litre capacity as per approved design & drawing etc. complete.

41 Providing, erecting and fixing double coated I.S.I. Mark P.V.C. water tank of 2000.00 Litre 3.95

required capacity each with all necessary fittings and connection etc. complete

on terrace as directed.

42 Providing and fixing M.S. grills of required pattern to wooden frames of window 2028.00 Kg. 102.62

etc. with M.S. flats at required spacings and frame alround, square or round bars

with round headed bolts and nuts or by screws (A) plain grill.

43 Painting two coats (excluding priming coat) on previously painted steel & other 68.00 Sq.m. 65.31

metal surfaces with synthetic enamel paint brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

44 Providing and fixing gun metal check or non - return full way wheel valve. (C) 25 4.00 No. 420.63

45 Construction brick masonary chamber for underground C.I. Inspection chamber 8.00 No. 2932.93

and beds with bricks having crushing strength not less 35 Kg.Sq/Cm.2 in

C.M.1:5 C.I. cover with frame (Light duty) 455 x 610 mm internal dimension total

Wt. of cover with frame to be not less than 38 Kg. (Wt. of cover 23 Kg. and wt.

for frame 15 Kgs. RCC top slab with 1:2:4 mix foundation concrete 1:5:10 inside

plaster 15 mm thick with C.M.1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete (i) Inside dimension 455mm x 610mm and

450mm deep for single pipe line.

46 Providing & fixing Acrylic sheet name board size 2.00 mt x 0.60 sqm. with 2.40 Job 1515.00

painting letters indicating Gram panchayat office / Village / Taluka / District etc.

as directed by Adm. Department etc. with all required material & labour

47 Providing & fixing 4.50 Kg Co2 type Fire Extinguisher with all required equipment 4.00 No. 5555.00

& labour complete.

48 Providing & fixing 6.00 Kg ABC type Fire Extinguisher with all required 8.00 No. 2525.00

equipment & labour complete.

49 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete block 68.00 Sq.m. 685.42

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidelines of IRC : SP 63-2018 etc. complete.

50 Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) 116.00 Point 447.43

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in/ on surface on

wall/ceiling complete with 6A Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC / Metallic box, single

mounting base frame covered with textured / metallic front plate modules

erected on / in wall / ceiling as per pipe erected with necessary lamp holder /

ceiling rose / H.D. Connector as directed. CAT- III

51 Point wiring for looped PLUG with tissino type single pole ISI marked 6 A. switch 40.00 Point 177.76

and 6 A socket erected with necessary connections erected on polished wooden

block / Metal / PVC box covered with 3 mm. thick laminated sheet for open /

concealed wiring.

52 Pipe type earthing having 150 cms long and 2.5 cms dia galvanised iron pipe 2.00 Each 434.30

with coupling and buch burried inspecially prepared earth pit complete with

necessary 8 SWG earth wire.

53 For using salt and charcoat / coke as required for pipe type earthing. 2.00 Each 202.00

54 Approved make ceiling fan with condenser A.C. 230 V50 Cys.1200 mm. sweep 14.00 Each 1883.65

complete canopy and 30 Cms. down rod resistance type regulator erected on

existing hook or clamp with 24/0.2 flat 3 core flexible wire with earthing fan

approved by Engineer in charge.

55 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 20.00 Each 630.24

56 Plastic on single

encloser fitted with MCPCB, with housing

din rail suitable used as a one

for incorporating heat/ sink shallMCB.

two nos. be 10.00 Each 60.60

It. Item of Work Qty. Unit Rates in Total

No. Figure Amount

57 DGVC Ltd. meter connection charges 2.00 Each 6060.00

58 Poswer connection charges from DGVCL/ GEB including in all Estimate charge 2.00 Each 5555.00

& meter connection given by DGVCL/GEB.

59 Supplying of single phase submersible pump set suitable for 100 mm size or 2.00 No. 18402.20

more dia bore well having motor capacity and discharge as under with

necessary panel box. (a) Motor rating 1 HP (12 stage) pump having capacity of

50 LPM at 43 to 45 mtr head suitable for 32 mm dia. delivery pipe Cat-II

60 Providing & fixing Florcat tube light fuze, chawk, Statar of Philips / Bajaj as 20.00 No. 454.50

approved by Engineer in charge.

61 Providing and fixing Cup board with 0.40 to 0.50 mm depth 19mm thick 8.00 Sq.m. 11413.00

Commercial ply wood for outsides of cupboard and shutters and full core 1.0mm

thick laminate sheet on both side and inside, self of cup board, polishing on teak

wood border patti including necessary hardware where required and fix on wall

with screw etc. complete as per instruction given by engineer in charge.

62 Providing officer Chairmen chair with arm and revolving Godrej type brand beat 10.00 No. 9140.50

seres with High back and seat sliding with up and down accommodation as

approved by Engineer in charge including all charges.

63 Providing Visitors chair of Neelkamal brand or equivalent brand as approved by 34.00 No. 580.75

Engineer in charge including all charges.

64 Providing Office Table of 0.75 height with 19 mm thick Plywood on top and 6.48 Sq.m. 11413.00

vertical support and laminate sheet on top and all other side including inside face

of table including making necessary drawer, shutter, computer tray, hardware,

border patti and polishing etc. complete as per instruction and drawing given by

engineer in charge.

i.e. Rs. Fifty Eight lacs Four thousand Six hundred Fourty Eight and Fifty Two paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Bharuch Bharuch Bharuch