Construction of Residential accommodation for PWD Staff at Sangrah

Amount

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centring shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all heights in all floors and removal of the same for in-situ reinforced concrete and plain concrete work as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like :-Floor etc. upto 200mm in thickness

Columns, pillars, posts and struts :- (a) Square rectangular or polygonal in plan

Stair case with sloping or stepped soffits excluding landing.

Beams, cantilever, girders and lintels :- Sides and soffits of beams, beam haunching cantilevers, brssumers and lintels not exceeding 1 metre in depth in all heights from floor.

Edges of slabs and breaks in floors and walls under 20cm wide

Providing and laying cement concrete 1 : 4 : 8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever.

Columns, pillars, posts and struts :-

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing :-

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) michamically mixed and vibrated for compacting concrete and curing complete including cost of form work and excluding reinforcement for reinforced concrete work as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Moulding as in cornices window sill

Providing and laying cement concrete 1:2:4 mix (1 cement:2 sand: 4 aggregate 20mm nominal size) for reinforced concrete chajjas not exceeding 10cm. Thickness upto floor two level centering/form work and curing complete excluding cost of reinforcement as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 (1cement :2 sand :4 stone aggregate 12.5 mm nominal size) and curing complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent ) using 1.70 kg per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Applying cement slurry on R.C.C. slab or cement conc. Work using 2.75 kg of cement per sqm. Of floor area before laying cement conc. Flooring i/c roughening ,cleaning of the conc. Surface complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing mild steel/Tor steel reinforcement including cost of binding wire for R.C.C. work including bending, binding and placing in position complete. Tor steel.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Second class brick work using common burnt clay building bricks in foundation and plinth cement mortar 1:6 (1 cement : 6 sand) as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Second class brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:6 (1 cement : 6 sand) as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Second class half brick work using common burnt clay building bricks in superstructure above plinth level upto all floor levels in cement mortar 1:4 (1 cement : 4 sand) as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 35 mm thick factory made panelled door shutter with non decorative phenol bonded termite resistant and water proof core of block board with frame of 1st. Class hard wood and well match commercial three ply veneer with vertical grain or cross band and face veneer both face of flush door , IS No 2202 of WUD- TECH OR ITS EQU. complete as per Arch. drg.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing P.G.I.sheet lining with 0.63 mm thick sheet of approved quality butt jointing and nails etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 12mm thick 150mm wide pelment with 25mm diamtre wooden curtain ,rods and brackets in cluding fixing 25x3mm M.S. flat at 10 cm long and plugs etc. complete. 1st. Class Indian Teak wood as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm or doors, windows, clerestory windows including bright finished black enamelled iron hinges with necessary screws. 35 mm 2nd.. class deodar wood. as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing M.S. grills of required pattern in wooden frames of windows etc. with M.S. flats, squares or round bars with round headed bolts and nuts or by screws. Plain grills.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts & nuts screws etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing anodized aluminium tower bolts (berrel type) anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing anodized aluminium handles anodized transparent or dyed to required colour and shade with bolts & nuts screws etc. complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing bright finished brass furniture handles including necessary screws complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing bright finished brass door stoper 100 mm including necessary screws complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing brass megnatic catcher including necessary screws complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 65x35mm. Special quality chromium plated bright finished brass cup board locks with six leavers including screws complete. (Indian make)as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing anodized M.S. single acting spring hinges with necessary screws etc. complete.(i) 150 mm as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing anodized M.S. double acting spring hinges with necessary screws etc. complete.(i) 150 mm as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 19mm thick Commercial Board water proof in shelves/box with but joint i/c fixing with nailsand screws etc.complete as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on board/ ply wood sheets with approved adhesive and nail etc. complete as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing square edges cover fillets (beading) 19 x 6 mm section i/c mitring at junctions with wood screws and nails complete. In 1st. Class D/Wood as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing 6.00 mm ply of standerd quality ISI marked and approved shade with screws and nails complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Vibro hydraulically compressed and polished terrazzo tiles 300 x300x25 mm of N.T.C. ISI marked No. 1237 in 70%white cement & 30% gray cement. the ratio of marble chips shall be 55% white &15% each green, yellow and mahroon The size of chips shall be 0,B &2B laid in floors and tread of steps, on a bed of 25 mm average thickness of cement mortar1: 6 (1 cement : 6 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile (where ever required ) including rubbing and polishing complete with tiles of following shades :- medium shade as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Vibro hydraulically compressed and polished terrazzo tiles 300 x300x25 mm of N.T.C. ISI marked No. 1237 in 70%white cement & 30% gray cement. the ratio of marble chips shall be 55% white &15% each green, yellow and mahroon The size of chips shall be 0,B &2B laid in skirting & rises of steps , on10 mm average thickness of cement plaster1: 3 (1 cement : 3 sand ) jointed with neat cement slurry mixed with pigment to match the shade of tile (where ever required ) including rubbing and polishing complete with tiles of following shades :- medium shade as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

White glazed tiles 6 mm thick in skirting risers of steps as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry.

Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. 40 mm thick

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neatcement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and laying water proofing treatment with Dr. fixit torch shield (P-3160-3 mm) 0n solvent based bitumen primer on clean and leveled surface @ 3.5 sqm./ liter and after1-2 hourof primerapply the Dr. fixit torch shield roll by using gas burner to heat substrate & under side to softening points complete as per Arch. Drg. and specification and as per directions of Engineer-in- charge.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Kota stone slab flooring 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 sand) laid over and jointed with grey cement sluurry mixed pigment to match the shade of slab including rubbing and polishing complete.25 mm thick.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and laying granite stone in flooring 20 mm (average) thickness base of cement mortar 1:3 (1 cement :3 sand ) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20 mm thick.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing Fibre Sheet roofing with galvanised iron J or L hooks and nuts 8 mm dia with bitumen and G.I limpet washers filled with white lead complete excluding the cost of purlin refter and trusses as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including

Providing and fixing on walls face PVC (D-Plast) rain water pipes of working preshure of not less then 4.5kg /sqm including filling the joints with approved adhesive complete. 150 mmdia pipe as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing on walls face PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

150 mm dia PVC plain bend

150 mm dia PVC shoe

Providing and fixing PVC clamps ISI marked of approved design to PVC. pipes with steel screws and rawal plugs completes. 150 mm dia as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Steel work welded in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

In trusses and trussed purlins in buildings.

In gratings, framed, guards, bars ladders and railing, brackets and similar works :-

Providing and fixing angle iron door frame manufactured from M.S.angle section of 40x40x4mm ,thickness and M.S. flat 50x4 mm in combination as per design and Drg. including hinges jamb,lock jamb,beed and welded continously with M.S. flat 50x4mm and cleat for fixing MS. hold fast 40x4mm of length 20cm complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing angle iron door frame (double rebate) manufactured from M.S.angle section of 2 angle 40x40x4mm ,thickness and M.S. flat 50x4 mm in combinationas per design and Drg. including hinges jamb,lock jamb,beed and welded continously with M.S. flat 50x4mm and cleat for fixing MS. hold fast 40x4mm of length 20cm complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing Window and ventilators frames manufactured of channel section 75 x 40 (Seventy Five into Forty) millimeters for end frames and for center frame channel section 75 x 40 (Seventy Five into Forty) millimeters with Mild Steel flat (Seventy Five into Four) millimeters. in combination welded together to make one frame with making square steel section with Mild Steel flat of 20 x 4 (Twenty into Four)millimeters and 12 x 4 (Twelve into Four) millimeters., shutters of rolled steel section F-7B (Seven B) section including glass panes of 4 (Four) millimeters thick in glazed panel and wire gauge of designation 85 (Eighty Five)with 0.56 (Zero point Five Six) millimeters dia in wire gauge panel and fixed glazing fixed with angle and T section of 25 x 25 x 3 (Twenty Five into Twenty Five into Three) millimeters and flat of 12 x 4 (Twelve into Four) millimeters in sash bars duly welded of all corners and joints properly, hold fast of Mild Steel flat 200 x 50 x 5 (Two hundred into Fifty into Five) millimeters. duly welded at corner and joints of all steel section, embedded in cement concrete block 1:3:6 (One cement : three sand : six graded crushed stone aggrigate twenty milimeters nominal size of size 100 x 100 x 100 mm. size (One cement isto Three sand isto Six graded stone aggregate Twenty millimeters. nominal size of One hundred into One hundred into One hundred) including providing and fixing of fittings that is handles, tower bolts hooks and eyes and applying a coat of primer with red lead paint and fixed in position complete in all respect as per architectural drawing and direction of Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washers plates complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Providing and fixing moulded hand rail of M.S. hollow pipe 50 mm dia welded in straight length over M.S. flat at top of vertical blusters including one coat of red oxide priming coat complete ( M.S. flat and balusters of railings shall be masured and paid separetly)as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Painting two coats (excluding priming coat )on new steel and other metel surfaces under coat with ready mixed paint brushing to give an even shade i/c cleaning the surface all dirt, dust and other foreign matter with ready mixed paint other than white as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters with enamel paint other than white as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Polishing two coat with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler. as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Applying Birla white care putty over plaster surface after throughly brushing the surface free from morter drops.dust, loose materials and other foreign matters sand papering smooth to give final finish to the surface complete.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Finishing wall with water proofing exterior grade emulsion of Asian paint of approved design or its equivalent on undecorated wall surfaces (TWO COAT) to give an even shade and final finishafter throughly cleaning the surface of all dirt, dust and other foreign matters and sand papering Smooth.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand)as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth ( in Cm 1 : 6 )as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including. Cement mortar 1:6 (1 cement : 6 sand)as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Distempering two coats with Synthetic/ Acrylic distemper of approved brand and manufacture and of required shade on undecorated wall to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture oafter thoroughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surfaces even and sand papered smooth.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth.as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.

Making connection of galvanised steel distribution branch with GMS main 20mm to 40mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Fixing water meter stop-cock in GMS tube i/c necessary fittings such as mild steel galvanished jam nut .sockets etc. complete cutting and making long screws (water metre and stop cock to measured and paid for separately) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge 25mm nominal bore

Providing and Fixing PVC water tank of ISI :-12701 marked,G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting up to all heights above ground level. (make SINTEX having capacity of 1000 liters) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing High pressure PVC spigot and socked , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110mm dia

90mm dia

Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC offset 45 degree ISI marked including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC double equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90mm dia

Providing and fixing PVC plain double equal branch ISI marked complete including fixing with approved adhesive complete as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm dia

90 mm dia

Providing and fixing PVC cowl as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm nominal diametre :-

90 mm nominal diametre :-

Providing and fixing vitreous china wash down water closet (European type W,C.pan/ Indian type W.C. pan) with integral P or S trap if required, including jointing the trap with siol pipe in cement pipe in C.M. 1:1( 1cement :1 sand ) (seat and cover to be measured and paid for separately) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Orissa pattern :- No.2071 size 580x440 mm of CERA / HINDWARE.

Providing and fixing 10.0/12.50/15.00 liters viterious china low level flushing cistern with a pair of C.I or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball with poilythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend inclluding cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separatelyl)

Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and macking good the same but excluding fittings FLAT BACK category No 1025 as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge No 1025 size 550x400

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PVC. 110mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete. 110 mm dia. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing M.I. Union for wash basin or sink 32mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PVC ISI marked floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floors as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

110 mm x 90 mm

Providing and fixing C.P. brass waste for wash basin or sink 32 mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing & fixing 100 mm dia, C.P. grating as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws 600 X 20 mm as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete, as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing C. P. Brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing prayag double bowl Kitchen sink with C.I. OR M.S. brackets painted white i/c cutting holes in walls and making good the same but excluding fitting ISI marked 304 grade 1250 D as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge 1) size 1125x500x200 mm CERA/ HINDWARE

Providing and fixing CP brass bib tap with capstan head as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge size 15mm dia

Providing and fixing CP brass pillar tap with capstan head 15mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing C.P.brass angle cock without nuts and pipe 15mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PTMT push cock of approved quality and colour ( 20 mm female thread) as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing C.P.brass stop cocks 15mm dia as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing PVC connection pipe with brass union as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge 45cms length :-

15mm nominal bore :-

Providing and fixing brass full way valve with wheel as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

15mm nominal bore :-

20 mm nominal bore :-

Providing and fixing 15 mm mixer for kitchen sink with top/ bottom swinging spout as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

Providing and fixing Water pump to Lift rain water as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge

VIJAY KUMAR

BHARAT BHUSHAN