REPAIR TO BOUNDARY WALL NEAR TEMPLE AT CQA(I) ESTATE, LADPUR DEHRADUN AND PROVISION OF RAIN WATER HARVESTING IN COMMUNITY HALL AT ORDNANCE FACTORY DEHRADUN UNDER GE (I) (P) (FY) KANPUR.

Amount

Demolion of brick or stone boulder masonery built in cement mortar including all quoins , arches, pillars etc but excluding ashlar facings dressed stone works and precast concrete articles complete all as specified and directed.

Demolition of RCC roof,floor (other than ground floor) beams, column, staircase, landing, chajjas and similar suspended work complete all as specified and directed.

Dismantling of barbed wire mesh, any type

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Rough excavation in soft/loose soil not exceeding 1.5 m deep and getting out.

Rough excavation in soft/loose soil exceeding 1.5 m deep up to 1.5 mtr deep beyond the first 1.5 mtr and getting out.

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc in soft/loose soil all as directed

Excavating over area n exc 1.5 m deep and getting out soft/loose soil all as specified & directed.

ditto- all as per item No. 8 above but depth exc 1.5m but n.exc 3.0 m all as per specified and directed.

Returning, filling in, including spreading. Levelling, watering and well ramming in layers not exc 25cm thick with excavated material.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

Removing excavated material exc 250 m but n.exc 500m and depositing where directed at level n.exc 15 cm above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation all as specified & directed.

M&L for Walling of random rubble, uncoursed well bonded, bedded in retaining wall, abutments and similar work built in cement mortar (1:6) complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 Cast in situ for bond stone complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed for weep hole in RR masonary in any length fixed to wall all as specified and directed.

M&L for Raised pointing in Cement Mortar (1:4) to random or polygonal rubble, uncoursed or brought upto courses complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded croshed stone aggregate) as in coping, plinth course including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping)

M&L for formwork to sides of concrete foundations, column footings plinth beams and similar works, vertical or to better for rough finished flat surfaces of concrete complete all as specified & directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works, vertical or to better for fair finished flat surfaces of concrete complete all as specified & directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as directed.

M&L TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L for providing reinforced cement concrete (nominal mix) type B1(1:2:4) using 20mm graded stone aggregate as in foundation, including rafts, footing, foundation beam, plinth beams,bases of column for column etc etc complete all as specified & directed.

M&L for providing reinforced cement concrete (nominal mix) type B1(1:2:4) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified & directed.

M&L RCC Type B1, 1:2:4 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc.

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces in type B 1 1:2:4 (20 mm graded aggregate) with 1:6 cment mortar.

M&L for brick work with sub class ‘B’ old size brick, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces of wall surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in 1:3 cement mortar finished even and smooth without using extra cement.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in 1:4 cement mortar finished even and smooth without using extra cement.

Supply only Liquid water proofing compound.

M&L Plain cement concrete average 70 mm thick type B-1, 1:2:4 (20 mm graded aggregate) as in floor.

M&L Neeru finish to plastering as specified.

M&L Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm Granite or Trap stone complete all as specified and directed.

M&L Providing, cement concrete in string courses, plinth courses with sauser drain in type C1, 1:3:6 (20 mm graded aggregate).

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to e.290.Gde-E-165

M&L Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.

S&F Framed brackets of angles or tees with web and flanges cut to shape drilled and countersunk for screw including bending and welding angles as necessary gusset plates riveting etc n.exc 10 kg each brackets conforming to Fe. 290 Gde E-165 (Brackets over 10 kg each to be measured under 'StructuralSteel) complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any discription applying two coat of synthetic enamel paint over one coat of red oxide primer as directed.

Supply & fixing galvanized 2 strand steel barbed wire 2.20 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and providing galvanized mild steel wire, staple or steel pins etc as directed (each line of wire to be measured complete all as specified and directed).

S&F concertina coil galvanised 610mm dia (50 turn per coil) blade thickness 0.50mm streched over barbed wire and angle post 60 spirals /12 meters and three clips perspiral as per manufacturers instructions complete allas specified and directed.

M&L for complete removal of old existing treatment from surface of wall and applying two coat of cement base paint on old decorated cement based painted surfaces of walls complete all as specified and directed.

M&L Applying two coat of white wash over and after preparation of untreated brick or concrete surface, all as specified as directed.

M&L for preparation of new or previously untreated plastered surface and applying two coats of cement base paint complete all as specified and as directed.

M&L 250 mm dia PVC(SWR) single socketed; laid in trenches.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L fo broken glass coping on top of walls in cement mortar 1:3 complete all as specified and directed.

sidh builders