REPAIR / REPLACEMENT OF FLOORING, JOINERY, CLEANING OF WATER TANKS AND ALLIED WORKS AT DGNP MAIN OFFICE COMPLEX, EQUIPMENT OFFICE COMPLEX, DG HOUSE AND OFFICES AT DOCK YARD UNDER DGNP(V)

Amount

Cleaning and removing all dirt from water tanks and from mouth of circulation pipes etc for tank exceeding 250 and not exceeding 500 ltrs capacity complete all as specified and directed. Note: Date of cleaning of tanks should be written on each tanks in 8cm height such as "DATE OF CLEANING:...................."

Cleaning and removing all dirt from water tanks and from mouth of circulation pipes etc for tank exceeding 500 ltrs and not exceeding 1000 ltrs capacity, complete all as specified and directed. Note: Date of cleaning of tanks should be written on each tanks in 8cm height such as "DATE OF CLEANING:...................."

Cleaning and removing all dirt from water tanks and from mouth of circulation pipes etc for tank exceeding1000 ltrs and not exceeding 2000 ltrs capacity, complete all as specified and directed. Note: Date of cleaning of tanks should be written on each tanks in 8cm height such as "DATE OF CLEANING:...................."

Cleaning and removing all dirt from water tanks and from mouth of circulation pipes etc for tank exceeding above 2000 ltrs capacity, complete all as specified and directed. Note: Date of cleaning of tanks should be written on each tanks in 8cm height such as "DATE OF CLEANING:...................."

S&F in repairs 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair PVC water tank cover suitable for 500 Ltr/1000Ltr / 2000 ltr and above complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises of MD land complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing with and including backing layer of 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L Granite (of any type) tiles 20 mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing with and including backing layer of 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.complete,

M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile with and including backing layer of 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile with and including backing layer of 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic coloured tile in verticle surfaces 350 x 250 x 7mm / 300 x 450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tile with and including 10mm thick rendering as backing coat in cement mortar (1:4) for receiving of tiles complete all as specified and directed.

S&F in reapirs aluminium anodised handles of extruded section 125 mm long complete all as specified and directed.

S&F in repairs aluminum, anodized, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S&F in repairs aluminum, anodized, barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs butt hinges medium weight, cold rolled mild steel 100mm size fixed with necessary screw or welding as required complete all as specified and directed .

S&F in repairs butt hinges medium weight, cold rolled mild steel 75mm size fixed with necessary screw or welding as required complete all as specified and directed.

S&F in repairs 150mm overll length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repairs aluminium die cast door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F in repairs aluminum, anodized, hasp and staple safety type 125 mm size with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 250 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repairs aluminium, barrel tower bolts 200 mm long complete all as specified and directed.

S&F in reapirs aluminium anodised handles of extruded section 150 mm long complete all as specified and directed.

S&F in reapirs aluminium anodised handles of extruded section 100 mm long complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs figured glass 3 mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 150 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

S&F in repairs 25 mm dia mild steel PVC coating desinger drapry/ curtain rod complete all as specified and directed.

S&F in repairs mild steel PVC coating bracket/ holder for drapry rod fixed with screws complete all as specified and directed. (Design and colour approved by GE)

S&F in repairs 2nd class hard wooden beads sectional area n.exc 3 Sqcm for glazed or gauged joinery, ceiling including secured with nails complete all as specified and directed.

S&F in repairs for Block board 18/19 mm thick, grade 2 quality, interior grade, commercial type, fixed with nails/screws in cup board shutter/pelmets etc. or to timber frame work complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) not exc 1.5 sqm complete all as specified and directed.

Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm complete all as specified and directed.

S&F anodized aluminium poweder coated frame for doors, windows vetilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. Note:- Minimum thickness of powder coating 50 micron.

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges powder coated aluminium snap beading screws etc complete all as specified and directed. Note:- Minimum thickness of powder coating 50 micron.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium spap beading, screws, powder coated aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-21 100 mm long ( 2 nos) suitable handles (1 no.) complete all as specified and directed.

M&L in repair 9 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium door shuter/frame complete all as specified and directed.

S&F of 5.5 mm thick tinted sheet glass and glazing with aluminium beading & rubber gasket in square/rectangular of size exc 0.5sqm in each panes complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 24 mm thick factory made PVC door shutters to existing door frames made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of astic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer- in-charge. (For W.C. and bathroom door shutter).