REPAIR TO DRAIN, FOOTPATH, BOUNDARY WALL, SEWAGE SYSTEM AND OTHER MISC B/R WORKS AT ICGS VADINAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for Drain cover,manhole cover,Beam,Slab & etc all as specified

M&L for precast RCC 1:2:4 type B-1 for cover slab for drain and manhole using (20mm graded aggregate)& set in 1:6 including all necessary formwork and finishing exposed concrete surface without using extra cement comnplete all as specified

M&L mild steel TMT bars 10 mm dia and over , cut to length, bent shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified

Demolition of Un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)

M & L coloured chequered cement concrete designer tiles 30cmx30cmx22-25mm thick cement set jointed and pointed in neat cement in equal proportion and pigments incl 20 mm thick screed in CM 1:6 with grey cement and pigments.

M & L for 1:4:8, type D2 (using 40mm graded granite stone aggregate) in sub base complete all as specified

M&L for 60 mm thick coloured rubber moulded factory made machine pressed cement concrete interlocking paver ofM30 grade conforming to IS 15658-2006 of any colour and design as approved made by block making machine with strong vibratory compaction of approved shape, size, colour and pattern, jointed and pointed in grey cement and pigment, complete all as specified and directed by Engr-in-Charge

M&L for sand filling under floor or in foundations including watering and consolidation

S&F granite 18 to 20 mm thick (of any type) tiles, machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture or pigment to match the shade of granite stone including grinding and polishing , moulding edges as directed and for platform of tree edges complete incl 15mm thick rendering in CM 1:3 as backing

M&L cement concrete 1:3:6, type C-1 using 20mm graded stone ( machinical crushted ) as in surface channel and drains complete all as specified and as directed.

M&L for forming fair finished drain or channel 80cm inner girth in cement concrete, using extra cement including forms moulds, mitred/stopped ends etc complete all as specified.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity including taking down old one.

Dismantling mild steel work of any description not otherwise provided for

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grage St-240

S & F M.S work as in posts and struts in fencing incl cutting tops toshape as directed,drilling holes, notching for wire etc; flat iron fillets including all necessary arrangement and similar works conforming to Fe290 Gde E-165

S&F M.S Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete al as specified.

M&L preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel painting over one coat of redoxide primer complete all as specified.

S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified.

S&F MS galvanised chain link fencing with PVC coating weight not less tha 2.50 kg per square meter and dia of wire not less than 2.4 mm wit 1.5mm thick PVC coating and aperture of mesh 50mm x 50mm size all as specifed and directed.

Supply and fixing of Welded steel wire fabric supplied and fixed complete to wood or steel members of weight n.exc 4 Kg/Sqm, complete all as specified and as directed by Engr-in-Charge.

S&F 600 mm dia punched type concertina coil as per IS:4454 with galvanised coating and punched type material as per IS:513 deep drawn quality with galavaising coating having medium barbs (bard length 24+1 mm pitch between two barbs 35+1 mm) fixed in position and secured to both sides of shaped angle iron post stretched to a length of 6 to 8 mm to achieve 600 mm dia as in fencing to steel post and to another coil/MS ribs including fixing with special galvanised fasterners such as J clips C clips U clips all as specified and directed.Note:- After stretching the coil the length of the compound wall on which it has been stretched shall be considered for measurement

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed

Demolition of brick and stone wall built in cement mortor incl all quoins, arches, pillars built in cement mortar complete all as specified

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6 complete all as specified

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

M&L for plastering 15mm thick in cm 1:6 on fair faces of brick or concrete or stone surfaces,finished even and fair without using extra cement.

M&L for plastering 10mm thick in cm 1:4 on fair faces of brick or concrete surfaces finished even and fair without using extra cement.

S & F stain less steel stair case railing/corridor railing with vertical sections 40 mm dia and 16 guage of grade 304 and 50mm/32 mm dia of 16 guage of grade 304 in horizontal sections, stainless steel caps for horizontal/vertical sections and stainless steel balls at top including polishing/buffing etc completed all as specified and directed .including dismantling existing staircase railing

Taking down out (desilting) silt, brick bats debris liquid waste sludge in solid/semi solid state from Manholes of any capacites including pumping out sludge wherever necessary plugging diverting the flow in the drain if necessary and staking the removed silt/sludge in deposit away from the edge of manholes as directed including use of safety belt dry cells torch for lighning in side the manholes as directed including use of safety belt dry cells torch for lightning in side the manholes and taking down similar precautionary measures and removing the sludge etc to out side MD land and cleaning the manholes with clean water etc all as specified and directed by Engineer-in-Charge.

Taking out silt, liquid waste, sludge etc. in solid/semi solid state from septic tanks of various capacities and suitably disposed off outside MD land complete all as specified and as directed.

Cleaning of water tank of capacity exc 500 ltrs but n. exc 1000 Ltr removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as directed by Engineer -in- Charge. (Note : The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.)

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire stapels including old or new beading complete all as specified and as directed by E-in-Charge

Hacking out old broken glass (any thickness size quality or description) from wooden , steel or aluminium frames glazed with putty or fixed with wooden beads complete all as directed by Engineer-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or beading in squares n.exc 0.5 sqm in each pane

S&F 20mm dia aluminium curtain rod with brackets etc all as specified and directed by the Engr-in-Charge fixed in repair

S&F 150 mm aluminium handles, cast type anodised fixed in repairs

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy but fixed in repairs

S& Fixed in repair rubber beading 50 mm wide and 5 mm thick

S&F magic eye of good quality as per make approved by Engr-in-Charge fixed in repair

Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises all as specified and directed by Engr-in-Charge

M&L for Non - skid Ceramic tiles 7to8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.(size of tile,as directed by Engr-in-charge) including 20mm screed bed in cm 1:6 complete all as specified and directed

M/L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cm 1:4 on vertical surface complete all as specified and directed

S& fixed in repair tubular towel rail, 20 mm dia , D type, 60 cm long between flanges of brass chromium plated

S & Fixed in repair soap dish of chromium plated fixed to plugs with chromium plated screws

S&Fixed in repair health faucet with all accessories all as specified and directed by Engr in Charge

S&Fixed in repair PVC (SWR) pipes single socketed in any length with rubber ring joints and accessories laid in floors/wall of 110 mm bore

S&Fixed in repair PVC (SWR) bends 110 mm upto 12th floor

M&L for Plate racks made out of 0.8 mm thick .Stainless steel, of size 750x600x 250 mm all as specified and directed as fixed in repair upto 12th floor

S&F in repair PVC waste pipe flexible type for couplings 32/38 mm dia 610 mm long. upto 12th floor

S&F in repair 15 mm bore pillar taps swan neck cast copper alloy fancy type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipes all as directed by Engineer-in-Charge

S& F in repair handles for 10 Ltr capacity PVC flushing cistern complete all as specified

S & Fixed in repair 15 mm size float valve for 10 Ltr capacity PVC Flushing cistern

S&F in repair for washers for 10 Ltr capacity PVC flushing cistern

S&F in repair vitreous china Pedestal type water closet with white seat cover upto

S&F for Vitreous China ware wash hand basin white, flat back, size 550x400 mm size with cutting for and pinning ends of brackets or erecting stand including CP waste coupling, 32 mm dia PVC waste pipe fixed in repair

S&F of low level flushing cystern 10 ltrs capacity, valveless, syphonic action type with inlet, ball valve, float and and handle , body moulded from virgin quality high impact poly propoliyone incl brackets and 32 mm dia PVC flush pipe for low level flush cistern fixed in repair

S&F in repairs for 15mm dia CP tap of brass type cast copper alloy with crutch or butterfly handle fixed pipe in repairs

S&F in repairs brass CP shower rose 75mm size fancy type with swivel joint any size incl fixing to steel pipe/union for 15mm dia complete all as sp[ecified

S&F PVC connection of 15mm dia length 450mm with PTMT nuts fixed in repair

S&F PVC connection of 15mm dia length 600mm with PTMT nuts fixed in repair

S&Fixed in repair stope valve 15 mm dia , caster copper alloy, screwed down, high presseure fancy type chromium plated screwed f both ends for iron pipe or for unions with long shank and cup (concealed type) and fixed in repair

PVC body cabinet box mirror of size 350mm x 450mm x 100mm in PTMT alloy of approved patterns and design. Make: PRAYAG, CAT NO - 551 or equivalent as approved by GE

S&F in repair Peg set of three made of teak wood and Aluminium pegs of size 10cm complete al as specified and directed

S& F CP Grating 100 mm dia fixed in repaiir

S&F in repair brackets for curtain rod of required size

S&f butt hinges 100 mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 all as Specified and directed by Engineer incharge.

M&L for granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kg per Pack) made of 92% silica particles coated with fade resistant pigment, 100% acrylic polymer bonding agent (5 Kg per pack) with the applied thickness of the coating being between 0.8mm -1.2mm to be applied on curved, smooth level plaster without key, as per manufacture directions, for usages to be applied and approved applicator of the manufacture as per the direction/ supervision of the Engineer-in-charge, all complete. The above textured coating should conform to surface spread of flame class one of BS 476:Part 7:1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surfaces complete all as specified and directed. Make:- Bakelite Hylam Limited or equivalent make approved by the GE.

S&F in repair 20 mm outer dia of pipe 3-layer PP-R polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV Stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plian & brass threated polypropylene random fittings fixed complete to walls, ceiling or in floors etc.

S & F in repair PPR pipes 32 mm outer dia laid in walls/floors including bends, elbows, unions etc, laid on walls and making good complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as fixed in repair

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F size of grid 605 x 605 mm GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre

M&L for Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionscomplete all as specified and as directed at site.

all as per item no 77above but to curved surface

M&L for preparation of ceiling surfaces and applying two coat of oil bound distemper over a coat of primer

S&F wall panelling made up of UPVC foam profile with homogenous fine cellular structure having smooh outer intergral skin having 100mm wide tounge and groove design with 10mm thickness of required shade, the internal batten having 35mm width and 17mm thickness, The batten aligned horizontally along the wall with 50mm gap above the floor and below the ceiling. The internal batten shall be fixed 450mm centre to centre in between junction and corners should be covered with foam beading profiles including providing 17mm thick EPS Sheet as insulation and better rigidity of wall panelling between wall and paneling complete all as specified and as directed.

S & F for 2mm thick PVC tiles/sheet, laminated,plain coloured, marbled, mosaic or mottled finish in floors complete all as specified and directed by engr in Charge

roxy enterprise

EVEREST BUILDERS

Vijay Construction Co

jitendra c joisar

SURESH ELECTRICALS

JAMNAGAR ELECTRIC AND MACHINERY CO

fakhrie apostrical

KRISHNA ENGINEERING