PERIODICAL SERVICES, WELCOME MAINTENANCE AND CAMOUFLAGE PAINT TO CERTAIN BUILDINGS IN AREA A AND AREA C AT AF STN WADSAR

Amount

M&L preparation of old surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M&L preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coat of colour wash complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.

M&L for complete removal of existing treatment from old wall surfaces and applying two coats of oil bound distemper over sufficient coat of wall putty complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coat of cement based paint complete all as specified and as directed.

M&L for complete removal of existing treatment from old wall surfaces and applying two coats of cement base paint complete all as specified and as directed.

M&L preparation of old surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of existing treatment by scrappers or other means of wall surface and applying one coat of acrylic paint exterior grade complete all as specified and as directed.

M&L for preparation of existing treatment by scrappers or other means of wall surface and applying two coat of acrylic emulsion paint exterior grade over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment of old surface including brooming down/ steel wire brushing, scraping down smoke soot, mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall complete all as specified and as directed by Engineer-in-Charge.

M&L for applying 2 coat of weather proof exterior emulsion paint (apex) in camouflage pattern by diluting of water (as per manufactucturer direction) a gap of 24 hours should be given between two coats, over a coat of primer on plastered/un-plastered surface should be allowed to cure completely such as surfaces applying one coat of exterior wall primer by thinning a litre of primer with one litre of water allow the primer coat for four hour including cleaning and ensure that the surface to be painted is free from any loose paint, and filling the surface imperfection such as holes, dirt, fine cracks are to be filled with cement and fine sand (in the ratio 1:3) complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of old steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Demolition of brick work of any description and in any position, built in cement mortar complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6.00 m mean radious and built in CM (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:6 and setting coat of 5 mm thick CM 1:4 on brick or concrete surface wall including finished and smooth without using extra cement complete all as specified and directed

M&L Rendering 15mm thick of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall all as specified and as directed by Engineer in Charge.

All as per Item No 19 above but 5mm thick in ceiling surfaces CM (1:3) complete all as specified and as directed.

M&L preparation of new surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

M&L preparation of new surface in ceiling and applying two coat of white wash complete all as specified and as directed.

M&L preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided in cement concrete complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in levelling course complete all as specified and as directed.

15mm thick screed bed or bedding layer of morter for laying floor finishes CM (1:6) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

M&L for vitrified ceramic tiles 9 to 10mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36Sqm, in floor/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for non skid ceramic tiles 7-8 mm thick light shade (square/ rectangular) polished area of each tiles not exceeding 0.36Sqm, in floor/skirting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per item No 30 above but light shed in skirting all as specified and as directed.

M&L for Endura glazed tiles 10 mm thick light/dark shade (square) area of each tiles 300 mm x 300 mm, in floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles size 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of CM 1:4 of 10mm thick etc all as specified and directed by Engineer-in Charge.

M&L for wallcare tiles of size 75mmx240mmx6mm thick in vertical surfaces over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match etc all as specified and directed by Engineer-in Charge.Make : SOMANY/ Orient Bell or Johnson.

M&L for providing 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS:15658-2006 of 60mm thickness M-35 Grade over sand cushion Note:- Sand will be measured and paid separately.

M&L 25mm thick sand filling (sand cushioning) under path for layers interlocking tiles complete all as specified and as directed.

Taking up or down 15mm dia medium steel tubing and connection including cleaning for refixing or removal to store all as directed.

All as per Item No. 38 above but 20mm dia.

S&F 15mm dia Steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

All as per Item No. 40 above but 20mm dia.

S&F in repair vitreous china white wash down water closet pan (pedestal pattern) including fixing bolts, plastic seat cover with jet spray and including necessary flexible pipe connection and removing debris out side MD land complete all as specified and as directed.

S&F in repair vitreous china squatting pan 'Orissa Pattern' of size 580mm x 440mm white with integral foot rest (excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level with inlet, ball valve, float and handle including brackets (The colour will also perfectly match with the EWC) complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin flat back of size 550mm x 400mm including PVC waste pipe, PVC 15 mm dia 450 mm long with waste coupling including brackets cutting and pinning in ends of bracket complete all as specified and as directed.

S&F in repair 15 mm dia CP bib tap cast copper alloy of minimum weight 400 gm with crutch or butterfly handle screwed down for iron pipe or union complete all as specified and as directed.

S&F in repair 15 mm dia CP stop valves cast copper alloy of minimum weight 400 gm with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and as directed.

S&F in repair fancy type 20 mm dia CP stop valves cast copper alloy of minimum weight 400 gm with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps fancy type ,cast copper alloy, with capstain head, chromium plated, screwed down, high pressure, with or without letters cold or hot with long shank and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated shower roses 125 mm size with swivel joints, any size including fixing to steel pipe or union 15 mm dia CP stop valves cast copper alloy with crutch or butterfly handle both ends for iron pipe or for fixed union complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.

S&F in repair health faucet (ABS) with rubit cleaning system 1.25m long PVC flexible tube & ABS wall hooh complete all as specified and as directed. Make:- Cera/ plumber or equivalent make as approved by GE.

S&F in repair PVC jet with inlet pipe suaitable for EWC complete all as specified and as directed.

S&F in repair 75mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair stainless steel grating with or without hole of size 150mm complete all as specified and as directed.

S&F in repair PVC waste pipe of 32mm dia complete all as specified and as directed.

S&F in repair waste coupling of 32mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair SS shop dish of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S&F in repair plastic water closet seat cover to pedestal pattern pan with chromium plated hinges complete all as specified and as directed.

S&F in repair PVC water connection 600mm long to wash basin of 15mm dia including CP nuts and washers all as specified and as directed by Engineer-in-Charge.

S&F in repair stainless steel sink 1.00mm thick for kitchen or laboratory, with plug, wast pipe, washers, including cantilever cast iron brackets, connecting union etc, overall size 495mmx420mm with bowl size 410mm x 330mm x 160mm including waste coupling, waste pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 mm dia chromium plated SS curtain rod including socket and bracket complete all as specified and directed.

M&L for water proofing treatment in WC & bathrooms by applying cement slurry mixed with water proofing chemicals as per manufacturer's specifications of approved make as under:- (a) All corners of WC, bath shall be rounded by providing fillet of dia 75mm. (b) 15mm thick rendering on floor in CM 1:3. (c) Applying cement slurry @ 0.488 kg/sqm. (d) 200 micron thick polethene film of approved make with approved adhesive. (e) Including demolition of lean concrete in sunken floor and refilling of lean concrete 1:5:10.

Supply only intergral water proofing compound complete all as specified and as directed.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) n. exc. 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) exc. 1.5 sqm but n. exc. 4.00 sqm each complete all as specified and as directed.

M&L for 30 mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (with shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats complete all as specified and as directed by Engr in Charge.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, kiln seasoned and chemically pressed treated complete all as specified and as directed by Engr in Charge.

S&F solid PVC door framed size 50mm x 47mm made out of 5mm plain colour square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style)) consisting of frame made out of MS Tubes for top and bottom rail, MS frame shall covered with heat moulded PVC ‘C’ channel having a PVC sheet striped 20mm width strode inside with solvent cement rail and bottom rail on either side and as gap insert for top rail and bottom rail panting of predawn colored PVC sheets to be fitted in the MS frame welded/ secured to the stiles and rails fathered at edges with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at the site as per specification complete all as specified and as directed.

All as per Item No. 72 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and as directed.

S&F aluminum alloy anodized sliding door bolt with hasp and staple 300mm complete all as specified and as directed.

S&F 100mm butt hinges, medium weight stainless steel ISI marked complete all as specified and as directed.

S&F aluminium anodised handle fabricated type of size 150mm complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section of size 150mm complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.4 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.4 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm , bottom size 92x31.75x1.50mm and shutter top & bottom of size 40x18x1.55mm and sides (handle) of size 40x18x1.55mm and lock side shutter frame of size 40x18x1.45mm " with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed by Engr-in-charge

Supply and fix Aluminium ventilator powder coated (requried colour to match window colour), louvers type, frame top & bottom of size 31x42x1.60mm rectangular tub of size 40x20x2mm and middle vertical of size 42x46.20x1.60mm Section and clip for fixing wire mesh and glass of size 19x17.30x0.90mm thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc complete all as specified and as directed by Engr-in-charge

S&F aluminium powder coated (requried colour to match window colour) grill of 5 mm dia squares rectangular triangular circular shape aperture n. exc. 7.00 cm in length or width fixed with H or F channel make grill No. 20 of décor or equivalent complete all as specified and as directed.

M&L for aluminium doors, powder coated (of approved colour), with frame of section 100mm x 44mm x 2.5mm thick and shutter with bottom rail of section 150mm x 44.5mm x 2.5mm thick, middle rail of section 85mm x 44.5mm x 2.5mm thick and top rail of section 80.4mm x 44.5mm x 2.5mm thick and styles of section 80.4mm x 44.5mm x 2.5mm thick with 5mm thick glass (plain/ tinted/ with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and as directed.

Dismantling water tanks and exc. 250 but n. exc. 500 litre capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 500 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 15mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Dismantling water tanks and exc. 500 but n. exc. 1000 litre capacity complete all as specified and as directed.

S&F rotational moulded water storage tank 750 ltr capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair overhead tank PVC cover thread/ hinged type with suitable locking arrangement suitable upto 1000 Ltrs capacity complete all as specified and as directed.

S&F in repair 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.

S&F in repair PVC cabinet with mirror of size 450mm x 600mm complete all as specified and as directed by Engineer-in-Charge. Make:- Rajshree/ Sintex/ Accucel/ Commander/ Polytuf as approved by GE.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid and bedded on pointed on any mortar complete all as specified and directed.

M&L 15-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform sand like in cement mortar (1:4) including moulding and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for single piece of green marble slab 15-18 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Marble slab including moulding,cutting and polishing and nosing and polishing of the free or front edge of the slab window cills etc and including 15mm thick backing coat in CM 1:4 complete all as specified and as directed by Engineer -in -Charge.

S & F in repair stainless steel plate rack of size 750x600x250mm of approved make including taking down old wooden plate rack complete all as specified and directed.

Supply & fixed in repair CP peg set of four complete all as specified and directed by Engr-in-Charge.

S & F in repair CP center hole wash basin mixer cast copper alloy suitable for iron pipe 15mm bore make L & K code 0427-A or equivalent as approved by GE.

S & F in repair, two way angle valve cock chromium plated fancy type bore 15mm. Make L & K code No 0327 or or equivalent as approved by GE.

Supply and fixing in repair sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing in repair toilet paper holder chromium plated as per sample kept in GE’s office.

DMA PROJECTS

Priya Construction co.