Exterior illumination at Homi Bhabha Cancer Hospital and Research (TMC), Aganampudi, Visakhapatnam, Andhra Pradesh

Amount

L.T Cables: Supply, installation, testing & commissioning of 1.1 KV grade aluminium/ Cu stranded circular/ sector shape core conductor with XLPE insulation, extruded PVC inner sheathed, G.I flat strip/wire armoured, extruded FRLS grade antirodent & anti termite PVC (ST-2)outer sheathed cable conforming to IS : 1554 Part I / IS 7098 Part-I with latest amendments, fixed on wall/existing HDPE pipe/ existing cable tray /existing hume pipe/trench/ shaft/pit/ on 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/grouted in wall/anchor fasteners 2mm. thick G.I. fabricated saddle, all fixing accessories, etc complete including painting of M.S. spacers/angles and saddles as per enclosed detailed specifications, drawings & as per instructions of the E-I-C & of the following sizes : Note: HDPE pipe shall be measured seperately under item no. 14.

4C x 10 Sq.mm Al. conductor cable in existing HDPE pipe

3C x 2.5 Sq.mm Cu. conductor unarmoured cable in existing HDPE pipe

LT Cables End Joints: End jointing of following sizes of cable by crimping with supply of all jointing materials like solderless tinned copper cable socket, double compression brass cable glands, gland earthing, insulation tape, flux, duplicate interconnection between gland earthing strip & to the nearest earthing bus terminals as per the drawings, specifications and as per the instructions of the Engineer-in-charge.

4C x 10 Sq.mm Al. conductor cable

3C x 2.5 Sq.mm Cu. conductor unarmoured cable

GFRP POLES : Design, manufacture, testing at works, supply, assembling, installation, and erection of Glass Fibre reinforced polymer composite (GFRP) conical poles of following height above ground, min. 5 mm thick, customised colour as per instructions of EIC, with built in junction box & suitable base plate for mounting on RCC foundation 200mm above FGL. Junction box should be provided 500 mm above base plate with 1 no. 6A DP MCB (D-curve), & brass earth link mounted on bakelite sheet, The scope of item shall include the cost of RCC foundation , foundation bolts, anchor plates, nuts, washers, min 2 nos. HDPE PLB pipe 40/33 mm dia bend to shape min. 1.5 m in length, & including excavation in all types of soil/foot path cutting , temporary reinstatement, back filling, dewatering, consolidation, disposal of excess earth within the radius of 500 m and making good to the original finish etc as per enclosed detailed specifications & drawings, as required to complete the work in all respect as per instructions of the E-I-C. Note: The RCC foundation shall be as per Drg. No. DCSEM/SDS/STD.DRG./ STREET LIGHT POLE-01/8719-R0.

3m GFRP Conical pole

POST TOP LUMINAIRE : Supply, Installation, testing & commissioning of following LED luminaires on existing GFRP poles, including internal wiring with 3 Core 2.5 sq.mm FRLS PVC insulated copper conductor cable from terminal box at bottom of the pole to the luminaire, earthing of luminaire etc as per instructions of the EIC. Note: 1) The scope includes providing suitable GI nipple to mount the LED luminaires on existing poles. 2) Independent wiring to be done for each fixture from terminal box. 3) No negative tolerance is allowed on the min. system performance parameters indicated in SOQ & specifications. 4) The Cat. No. of luminaire in preferred makes, not indicated in the SOQ item description, shall be submitted for approval of dept.

Post Top LED lumiaires having minimum efficacy of 100 lumen/Watt, min. output of 3500 lumens, CCT 4000 to 5700K having IP 65 and IK 07 protection etc. similar to M/s Bajaj make having Cat No BGCTN 25W LED WW OR M/s Signify make having Cat No BGP 300 LED 40 740 PSU IN S1 OR M/s Crompton Make having Cat no LPTO-40-CDL-M or M/s Havells make having Cat no RUBY PT 35W LED857 PSYMTOPC.

SOLAR POST TOP LANTERN : Supply, Installation, testing & commissioning of post top luminaire mounted on 4m (above ground) Al alloy pole with UV resistant powder coating and with solar PV panels mounted on all four vertical sides of pole (2m from top) & integrated Li-ion battery with MPPT solar charge controller mounted inside the pole. The luminaire shall have min. 2500 lumen output, IP66 with 4000K CCT. The standalone post top luminaire with pole shall be similar to M/s Signify make having Cat No BGP 161 LED 2500/NW + 4m Integrated Pole with solar panel OR M/s Havells make Enviro Quadra. The scope of item shall include the cost of RCC foundation , foundation bolts, anchor plates, nuts, washers, & including excavation in all types of soil/foot path cutting , temporary reinstatement, back filling, dewatering, consolidation, disposal of excess earth within the radius of 500 m and making good to the original finish etc as per enclosed detailed specifications & drawings, as required to complete the work in all respect as per instructions of the E-I-C. Note: The RCC foundation shall be as per Drg. No. DCSEM/SDS/STD.DRG./ STREET LIGHT POLE-01/8719-R0.

Supply & erection of 7 to 12W Bollard fixture, 800-1000 mm high, min.IP 65, IK 05, 2700-4000 degree K CCT, with PCC block of 200 x 200 x 200 mm for mounting on ground, anchor fastners, 2 nos 40/33 mm HDPE pipes in PCC block for passage of loop in & out cables etc. The scope also includes wiring with 3C x 2.5 sqmm Cu PVC unarmoured cable in GI pipe from existing terminal box of street light pole wall upto terminal of fixture, earthing etc. complete as required as per instructions of E-I-C. The bollard shall be similar to M/s Bajaj make having Cat. no BGBOL 605 9W LED OR M/s Signify make having Cat No BCP 151 OR M/s Crompton make having Cat no LBLA2-10-CDL OR M/s Havells make having Cat no BAMBOO BLS 8W LED 830 PSYMTOPC.

Supply & fixing of wall recess mounted LED step light having power consumption of approximately 3-10 W with CCT of 3000K having IP65 & IK 06 protection etc. complete as required as per instructions of E-I-C. similar to M/s Bajaj make having Cat no. BLSGV 4W LED WH OR M/s Signify make having Cat no BWG 150 LED 50/WW PSU 220-240V 7043 OR M/s Havells make Radiant NEO FT 07W LED 830 SASYMBOPC OR M/s Crompton make having cat no LSL-6-WW.

Supply & erection of 6 to 10W LED bush light IP 65, IK 05 CCT 2700 to 4000K mounted with adjustable bracket on PCC block of 200 x 200 x 200 mm for mounting on ground, anchor fastners, 2 nos 40/33 mm HDPE pipes in PCC block for passage of loop in & out cables etc. The LED bush light shall be similar to M/s Bajaj make having Cat no BGSBLL 9W LED WW OR M/s Havells make having Cat no LycusLL 9W LED 730 PSYMOTG.

Earthing of light poles etc. with 8 SWG G.I earth wires 8 m long coiled in 1m dia at a depth of 1400mm below ground level complete with soldering and connections with sockets etc all as as per instruction of E.I.C.

Supply, Installation, testing & Commissioning of 8 SWG GI earth in existing HDPE pipe complete with soldering and connections with sockets etc all as as per instruction of E.I.C

Terminal Boxes: Supply & erection of min. IP 65, Polycarbonate terminal box of 250 x 200 x 115 mm size, housing 4 Nos terminals (for 10 sqmm Al cable) on epoxy insulator,3 nos. 3-6A SP MCB, 1 no. brass neutral link & 1 no. brass earth link etc. including internal interconnection from terminals to SP MCB, suitable for mounting on external wall etc. for distributing power to landscape luminaires as per instructions of E.I.C.

Cable Marker : Supply, installation of oval/circular shaped G.I cable marker engraved as "LT/HT Cable/HT straight through joint" complete with 32mm dia NB medium G.I pipe support as per IS 1239 with 1:2:4 PCC base concreting, G.I nut bolts, including excavation in all types of soil upto required depth and refilling etc all as per drawing, specifications and as per the instructions of E.I.C

Supply & installation of 250 mm dia heavy duty RCC Hume pipe of class 'NP3' to be laid in ground/from concrete cable trench to ground, for passing of cables with necessary joints, concrete supports. Scope includes excavation below ground, level in all types of soil/concrete road cutting/foot path cutting, nallah cutting /any RCC wall/floor cutting including back filling, dewatering, consolidation, reinstatement of excess earth within the radius of 500 m and original, disposal making good to the original finish etc. spare space of hume pipes after cable laying and spares hume pipes shall be sealed properly with fireproof materials.

HDPE pipe : Supply & laying of 50/42mm dia HDPE PLB duct in ground at depth of 750 mm including excavation in all types of soil including hard rock if any cutting of existing footpath, road etc, sand bedding, laying of warning tape on top, temporary Reinstatement back filling ,dewatering if necessary consolidation, disposal of excess earth with in the radius of 500 m etc. or fixed on wall/column/slab with 5mm thick M.S. flat /GI spacer/angle/ support fixed with coach screws/ grouted in wall/anchor fasteners 2mm thick G.I. fabricated saddle, all fixing accessories, etc complete including painting of M.S spacers/angles all as per the attached work specification and instructions of EIC. Note: 1) The scope of work includes HDPE pipe accessories such as couplers, cable end plugs, cable sealing plugs etc.

Supply & installation of 25mm high mechanical stress (HMS) rigid PVC conduit having ISI marked IS 9537 Part - 3, including fixing accessories & hardware concealed /exposed in slab/wall or on 5mm. thick G.I. spacers fixed with no. 10 nettle fold wood screws with nylon plug complete with all conduit accessories 20 SWG G.I. Saddles, MS/PVC pull out boxes, MS/PVC junction boxes, couplers, bends binding wires etc. as per site condition & as per instructions of E-I-C.

M. S. Boxes : Fabrication, supply and installation of M.S. boxes with 2 coats of primer & 2 coats of enamel / PU paint as per instructions of EIC.

FEDIN ENGINEERING PRIVATE LIMITED

SRI RAGHAVENDRA ELECTRICALS

MAHITHA ELECTRO TECHNICS

BHAGYASRI ELECTRICAL WORKS