Malappuram District Panchayath - Annual Plan-2025- Project No. 384/25 - Construction of Vayojana Park in Various Places in Malappuram District

Providing Gym equipments

OD113410/2025-2026 Supplying and fitting -Air walker Dimensions (LxWxH): 1100 x 450 x 1300mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., ‘U’shaped main frame of NB 80mm (G.I.) ‘C’ Class Pipe, Leg Support frame of NB 50mm (G.I.) ‘C’ Class Pipe., 4.Handle frame pipes of NB 32mm (G.I.) ‘C’ Class., (‘NB’standsfor Nominal Bore i.e., Internal Diameter of pipe in millimeters), All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational molding with minimum 4.00mm thickness, UV resistant and colored., Foothold made of Co-Polymer Plastic with rounded edgesto prevent impact and injury., Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use.

OD113411/2025-2026 Supplying and fitting -Abb Trainer Dimensions (LxWxH): 1250 x 800 x 1150 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., Main frame of NB 65mm (G.I.) ‘C’ Class Pipe., Handle support frame of NB 25mm (G.I.) ‘C’ Class Pipe., (‘NB’standsfor Nominal Bore Size i.e., Internal Diameter of pipe in millimeters)., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational molding with 4.00mm thickness, UV resistant and colored., Foothold made of NB 50mm (G.I.) ‘C’ Class Pipe., Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and, environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use.

OD113545/2025-2026 Supplying and fitting - Seated Twister Dimensions (LxWxH): 1800 X 500 X 1650 mm., 2.Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make., Support frame of NB 32mm & NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’standsfor Nominal Bore Size i.e., Internal, Diameter of pipe in millimeters)., Foothold plate of made of MS Sheet Metal of 3mm thickness., Sitting plate made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmental friendly., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored., Zinc primer paint is applied at all the welding points prior to finishing. Maintenance free bearings of SKF or equivalent, make duly oil sealed and self-lubricated are used in the equipment manufactured., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use.

OD113546/2025-2026 Providing and fixing Shoulder Twirl in a pair : Dimensions (LxWxH): 850 x 800 x 1800 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make., Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm., All pipes must be (G.I.) ‘C’ Class Pipes., (‘NB’standsfor Nominal Bore Size i.e., Internal Diameter of pipe in millimeters)., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational molding with 4.00mm thickness, UV resistant and colored., Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment, manufactured., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use

OD113547/2025-2026 Supplying and fitting - Waist Twister Dimension (LxWxH): 3000 x 1200 x 2200 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., Main Frame of NB 32mm & 25mm (G.I.) ‘C’ Class Pipe., Powder coated using Akzo Nobel or equivalent of 80 - 120 micron thick. (‘NB’ stands for Nominal Bore i.e., Internal, Diameter of pipe in millimeters), All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational molding with 4.00mm thickness, UV resistant and colored., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment.

OD113549/2025-2026 Supplying and fitting - Leg Press Dimensions (LxWxH): 1800 x 700 x 2000 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe., Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’standsfor Nominal Bore Size i.e., Internal, Diameter of pipe in millimeters)., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber, grips., Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored., Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and selflubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment.

OD113550/2025-2026 Supplying and fitting - Beanch With Fixed Weight Dimensions(LxWxH): 750 x 300 x 1200 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make., Seat Main frame of NB 50mm, Handle frame of NB 25mm, Leg frame of NB 32mm. All pipes used must be G.I.) ‘C’ Class, Pipe., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational moulding with 4.00mm thickness, UV resistant and coloured., Foothold made of NB 65mm (G.I.) ‘C’ Class Pipe., Seats made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and, environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and selflubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment.

OD113551/2025-2026 Supplying and fitting - Chest Press Dimensions (LxWxH): 1800 x 700 x 2000 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe., Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’standsfor Nominal Bore Size i.e., Internal, Diameter of pipe in millimeters)., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber, grips., Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored., Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and selflubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use.

OD113553/2025-2026 Supplying and fitting - Hand Rower station with below specifications: Dimensions (LxWxH): 1000 x 600 x 1100 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make, Main frame of NB 65mm (G.I.) ‘C’ Class Pipe., Handle support frame of NB 50mm (G.I.) ‘C’ Class Pipe and other pipes of NB 32mm & NB 25mm (G.I.) ‘C’ Class Pipe., (‘NB’standsfor Nominal Bore i.e., Internal Diameter of pipe in millimeters), All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by, rotational molding with 4.00mm thickness, UV resistant and colored., Foothold made of NB 32mm (G.I.) ‘C’ Class Pipe., Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant and, environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use

OD113554/2025-2026 Supplying and fitting - Seated puller Dimensions (LxWxH): 1800 x 700 x 2000 mm, Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of, approved make., Seat Main frame of NB 50mm (G.I.) ‘C’ Class Pipe., Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’standsfor Nominal Bore Size i.e., Internal, Diameter of pipe in millimeters)., All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints., All joints of pipe are robotic welded with jointsscalloped as necessary and dressed off removing sharp edges and burrs., Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber, grips., Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored., Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmental friendly., Maintenance free bearings of SKF or equivalent make duly oil sealed and selflubricated are used in the equipment, manufactured., The equipment are fitted with inbuilt limitersto prevent unwanted movements., The equipment isfixed on ground with concrete of minimum strength M- 25 and J shaped welded bolts of 18mm thickness., Once the concrete is set, the equipment isfixed on to it and nuts and bolts are covered with base plate cover., High tensile steel with galvanized nut bolts are used for assembly. Equipment made to EN16630 & DIN 79000 International, standard for outdoor fitness equipment., Self-Explanatory stainlesssteel label fixed on equipment for ease of use

Civil Works

2.28.1 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

50.6.7.1 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials,labour charges etc.

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

10.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

13.4.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.37.1 White washing with lime to give an even shade:New work (three or more coats)

8.9.1.2 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade

16.21 Engraving letters in hard stone