Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | ₹5.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹6.1 L+₹1.0 L (20.2%)Rejected-Finance | ₹6.1 L+₹1.0 L (20.2%) | L2 | Rejected-Finance L2 |
| 3 | L3₹6.2 L+₹1.0 L (20.5%)Rejected-Finance | ₹6.2 L+₹1.0 L (20.5%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | N DAMODARANPILLAI L2 | PRASAD S CONTRACTOR L3 | SHIBU P L1 |
|---|---|---|---|---|---|---|
| 1.00 | 2.1.1
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil | 15.6 | Sqm | 133 ₹2,074.8 | 134 ₹2,090.4 | 116.07 ₹1,810.75 Lowest |
| 1.00 | 4.1.6
Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3
coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | 3.69 | Cum | 8,363 ₹30,884.56 | 8,364 ₹30,888.25 | 1,235.35 ₹4,562.16 Lowest |
| 1.00 | 5.1.2
Providing and laying in position specified grade of reinforced cement concrete,
excluding the cost of centering, shuttering, finishing and reinforcement - All work up
to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm
nominal size derived from natural sources) | 0.45 | Cum | 10,486 ₹4,718.7 | 10,488 ₹4,719.6 | 9,072.79 ₹4,082.75 Lowest |
| 1.00 | 10.16.1
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 964.96 | Kg | 193 ₹1,86,236.51 | 194 ₹1,87,201.46 | 168.04 ₹1,62,154.1 Lowest |
| 1.00 | 10.28
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,
channels, plates etc., including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel nuts
and bolts complete, i/c fixing the railing with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the
side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.) | 215.72 | Kg | 766 ₹1,65,241.52 | 767 ₹1,65,457.24 | 664.13 ₹1,43,265.91 Lowest |
| 1.01 | 16.89
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with
water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modelslocation etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarsesand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | 42 | Sqm | 1,567 ₹65,814 | 1,568 ₹65,856 | 1,356.71 ₹56,981.78 Lowest |
| 1.01 | 13.61.1
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work | 250.71 | Sqm | 164 ₹41,115.95 | 164 ₹41,115.95 | 142.61 ₹35,753.83 Lowest |
| 1.01 | 5.22.6
Steel reinforcement for R.C.C work including straightening, cutting, bending, placing
in position and binding all complete upto plinth levelThermo - Mechanically Treated
bars of grade Fe-500D or more | 84 | Kg | 112 ₹9,408 | 112 ₹9,408 | 97.25 ₹8,169.08 Lowest |
| 1.01 | 5.9.2
Centering and shuttering including strutting, etc. and removal of form for:Walls (any
thickness) including attached pilasters, butteresses, plinth and string courses etc. | 28 | Sqm | 838 ₹23,464 | 839 ₹23,492 | 726.25 ₹20,335.11 Lowest |
| 1.01 | 50.12.2.2
Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by
the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping
screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal /
vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and
including cutting to size and shapes where ever required. | 104.08 | Sqm | 764 ₹79,517.12 | 765 ₹79,621.2 | 662.04 ₹68,904.71 Lowest |
Tender Value
₹7.3 L
EMD Value
₹18,200
Closing Date
11 Mar 2026, 5:00 pmClosed
Divisional Forest Officer, Thenmala
Divisional Forest Office, Thenmala
Providing shade for queue area in front of the parking area at Palaruvi in Aryankavu Range during 2025-26
2026_FD_843302_1
C3-11445/26
Open Tender
Civil Works - Others
Item Wise
30 days
Aryankavu Range
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,716
₹18,200
30 May 2026
4 Mar 2026
13 Mar 2026
4 Mar 2026
11 Mar 2026
4 Mar 2026
2.1.1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil
4.1.6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modelslocation etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarsesand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
5.22.6 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
5.9.2 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
50.12.2.2 Providing & fixing Poly carbonate multi wall plain sheet 4 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal / vertical / curved surfaces, but excluding the cost of purlins, rafters, trusses and including cutting to size and shapes where ever required.
OD127979/2025-2026 Labour engaged for removing waste materials and other petty repairs.
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1423202.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.90 MB
BOQ_1423202.xls
BOQ • 0.24 MB
EPAYMENT-1.pdf
Tender Documents • 0.06 MB
PRELIMINARYAGREEMENT-1.pdf
Tender Documents • 0.83 MB
TENDERCONDITION-1.pdf
Tender Documents • 35.78 MB
POWEROFATTORNEY-1.pdf
Tender Documents • 0.12 MB
DECLARATION1.pdf
Tender Documents • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .