REPAIR TO HARD STANDING, SECURITY WALL, COMPOUND WALL INCLUDING PERIODICAL SERVICES AND CONNECTED ITEMS IN ZONE-I AREA UNDER GE SAMBA

Amount

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level), Complete all as specified and as directed .

PCC 1:3:6, 75 mm thick,Type C-2 (using 40mm graded crushed stone aggregates) as in sub base in paver blocks etc, complete all as specified and directed.

Machine pressed precast concrete interlocking paver block of any shape and size approved by EIC, ISI marked (IS:15658-2006) 60mm thick, M-35 grade (Medium Traffic), in paths and hardstanding,with grey cement and pigment, laid tightly over & including 50 mm thick dry sand cushion (compacted) and joints filled with dry sand, colour and pattern as approved by GE, complete all as specified and directed.

Pre-polished chequered cement concrete tiles of size 20 cm x 20cm x 25 mm thick / 25 cm x 25 cm x 25 mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 20 mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

PCC 1:3:6, Type C-1 (using 20 mm graded crushed stone aggregates) as in kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5 m clear span, cills, steps, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, water troughs and like incl weathering, slightly rounded or chamfered aangles and throating all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc complete all as specified and directed.

Brick work with old size sub class 'B' burnt bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exc. 6 m mean radius built in CM 1:4 , complete all as specified and directed.

Taking down cement plaster on brick/concrete or stone walls, ceiling, etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Rendering 15 mm thick cement plaster in two layers 5 mm thick over and including 10 mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement ,complete all as specified and directed.

Preparation of newly plastered surfaces of walls etc and applying two coats of cement based paint over including priming plastered and other surfaces with alkali resistant priming paint , complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered/unplastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots, rubbing with sand paper, repairs of small patches of broken plaster (upto 0.020 Sqm) and applying two coats of cement base paint on walls, pillars, cornices etc . complete all as specified and directed.

Framed work such as grills, grating, etc. with ends of bars shoulders and/ or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work complete, conforming to Fe-410 (Gde E-250) complete all as specified and directed.

Preparation of newly steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth: for foundation etc or for shafts,wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm, complete all as specified and directed.

Removng excavated material (soil) to a distance n. exc. 50m and depositing where directed at a level n exc 1.5m above the starting point,complete all as specified and directed.

PCC 1:3:6 Type C-2 ( using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Dismantling posts or struts (Wood, steel or RCC) any section including taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, Complete all as specified and as directed .

Mild steel TMT bars (Fe 500) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per srl item No. 20 here in before but 6 mm dia to 8 mm dia as in striups, spacers and binders, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Reinforced cement concrete 1 : 2 : 4 type B-1 (Using 20 mm graded crushed stone aggregate) Nominal mix as Columns, Pillars, piers, posts and struts complete all as specified and as directed by Engr-in-charge.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

Manminder Singh and Co

s k construction co

M/S RAJESH SHARMA & CO.