ROAD WORK

No. figures Amount

1 Box cutting the road surface to proper slope and camber for 1790.00 Cum 104.21

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed within all

lead and lift.

2 Providing, laying and spreading Granular sub base (Grade-I) by 187.50 Cum 1031.21

providing close graded MCBT material in single layer with motor

grader on prepared surface, mixing by mix in place method with

rotavator at OMC and compacted with vibratory roller 80 to 110 KN

static weight to achieve desired density etc. completed.

3 Providing & laying compacted WBM Grading-II using MCBT metal 651.38 Cum 1435.21

of size 53mm to 22.4mm in required layers including using 24%

stone screening, 11.2mm size and 8% stone dust as filler including

spreading, watering and consolidation by vibratory roller as per

MORTH specification etc complete as directed by engineer in

4 Earthwork for embankment including breaking clods, dressing with 255.00 Cum 183.70

all lead and lift including rolling with power roller, watering and

consolidation from borrow pits within land width.

5 Hazard Marker Sign :- Providing and fixing sign boards made out of 2.00 No. 3518.69

2mm aluminium sheet / 4mm ACP (Aluminum composite panel)

size 90 x 30 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with one

coat of epoxy primer and two coats of best quality epoxy paint

reflectorised with Micro Prismatic Grade retro reflective sheeting of

Type-4 as per ASTM D-4956 and latest M.O.S.T. Specifications;

1.8mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe

as required and frame fabricated from suitable size iron angle of

x 35 x 3mm; painted with best quality epoxy coatings in black and

white bends. The details of symbol for each board shall be as per

the instruction of engineer in charge. The fixing at site shall be in

1:2:4 CC block of size 45 x 45 x 60 cms. for each leg including

excavation, curing etc. complete under the supervision of engineer

in charge. A warranty for 7 years for the retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product offered

shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

6 Village Name / Bump Ahead Sign :- Providing and fixing sign 12.00 No. 6397.44

boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite panel) size 90 x 60 cms. rectangular as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching,

coated with one coat of epoxy primer and two coats of best quality

epoxy paint; reflectorised with Micro Prismatic Grade retro

reflective sheeting of Type-4 as per ASTM D- 4956 and latest

M.O.S.T. specifications; 3.3mtr long stand post of 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with best quality

epoxy coatings in black and white bends. The details of symbol or

inscription/letters / numerals for each board shall be as per the

instruction of engineer in charge. The fixing at site shall be in 1:2:4

CC block of size 45 x 45 x 60 Cms. for each leg including

excavation, curing etc.complete under the supervision of engineer

in charge. A warranty for 7 years for the retro reflective sheeting

from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (B) Class-B Type-4 Retro Reflective sheeting

7 Direction (Junction) Sign :- Providing and fixing sign boards made 3.00 No. 21287.51

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

panel) size 244 x 122 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching, coated

with one coat of epoxy primer and two coats of best quality epoxy

paint, reflectorised with High Intensity Prismatic grade retro

reflective sheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T. Specifications; 4.0mtr (2 Nos.) long stand post of Iron

angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 50 x 50 x 5mm;

painted with best quality epoxy coatings in black and white bends.

The details of symbol for each board shall be as per the instruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC block

of size 45 x 45 x 60 cms. for each leg including excavation, curing

etc. complete under the supervision of engineer in charge. A

warranty for 7 years for the retro reflective sheeting from original

manufacturer & a certified copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor.

(B) Class-B Type-4 Retro Reflective sheeting

8 Citizen's Information Board : Providing and fixing of typical 2.00 No. 23062.34

information board as per instruction. Two M.S. plate of 1.6mm thick

of 900mm x 750mm size fixed at top and bottom duly welded with

M.S. angle with angles of 25 x 25 x 5mm thick M.S. plate shall be

welded by two vertical M.S. flat and four horizontal M.S. flats 5mm

thick to 75mm x 75mm of 12 SWG square tube posts duly

embedded in cement concrete M-15 grade C.C. blocks of 600 mm

x 600mm x 750mm below ground level. Painting new letters and

figures of any shade with ready mixed synthetic enamel paint of

superior quality in required shade and coloured, all sections of

frame joints and steel tube will be painted with primer and two coats

of epoxy paint as per drawing clause 1701 & Annexure

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

9 Road marking with hot applied thermoplast compound with 354.00 Sq.m 367.73

reflectorising glass beads on bituminous surface and laying of hot .

applied thermoplastic compound 2.5mm thick including

reflectorising glass beads @250 gms/sqmt area, thickness of

surface applied glass beads as per IRC 35. The finish surface to be

level uniform free from streaks and holes.

10 Supply & fixing logo board of MMGSY diamond size (600mm x 2.00 No. 22509.87

600mm) 16 gauge & board plate size (900mm x 250mm) 16 gauge

thick M.S plate and 2.40 mt. deep length single angle 75 x 75 x

mm size including fitting and painting lettering with luminous color

as per drawing etc. complete.

11 Supplying and fixing Cat eye (Stimsonite) made out from Acrilo 340.00 No. 375.72

beautile sterine injuction high compressed molding with reflector

made of MMC (prismatic type size 12 cm x 6 cm x 2.5 cm) provided

with bituminous adhesive 100 gm. with each unit for fixing (High

Intensity grade)

12 Providing and laying in foundation with ordinary cement concrete M- 406.00 Cum 3105.11

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete.

13 Providing and casting in situ ordinary cement concrete M-250 mix 608.00 Cum 4394.51

with Trimix C.C. Road laid as directed including vibrating, curing

and filling in joints with bitumen complete.

14 Providing and fixing I.S.I. mark T.M.T. Bar Fe-500D reinforcement 8400.00 Kg. 76.21

for R.C.C. work including binding, bending and placing in position

complete upto floor two level.

15 Supplying, fixing and joining reinforced concrete heavy duty non- 60.00 Rmt. 1028.03

pressure pipes carrying Indian Railway standard with collars for

culverts carrying heavy traffic as per Indian Railway standard

specification including setting and joining the pipes in C.M. 1:2

watering and laying (to level or slopes) of I.S. class NP4 of 300mm

internal diameter.

16 Providing and fixing precast Rubber Dye / steel Dye inter locking 1020.00 Sq.m 685.42

concrete block 60mm thick with grade of concrete M-300 .

pneumatic compressed / vibrated mechanically and as per

approved design confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper line

and level as per guidelines of IRC : SP 63-2018 etc. complete.

17 Providing and casting in situ controlled cement concrete M-150 for 139.00 Cum 4062.88

Kerbs / kerb blocks including formwork, curing and finishing

TOTAL Rs.

i.e. Rs. Seventy Seven lacs Fifty Six thousand Five hundred Eighty Four and Fourty Six paisa only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ________________________

In words ____________________ In words ____________________

It. Rate in Total

Description of Item Qty. Unit

No. figures Amount

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Bharuch Bharuch Bharuch