CONSTRUCTION OF STAFF QUARTERS BUILDING

Amount

Earthwork excavation for foundation in all soils except hard rock requiring blasting to a full depth with initial lead of 10 m and lift of 2m etc., complete (SS 20B) (Including Filling & Refilling)

Supplying and filling in basement with sand gravel mix crushed stone sand gravel mix (1:1) in foundation & basement complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.

Cement concrete 1:5:10 (One of cement five of sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete in respects complying with relevant Std, Specification and as directed by the Dept, Officers.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Centering for soffits of Rcc slabs of plain surface like lintels, beams, etc., including strutting 3M high using MS sheets of size 90cmx60cm and BG 10 stiffened with MS angles of size 25x25x3mm laid over silver oak (C.W) joists of size 10x6.5cm (spaced at about 90cm c/c) and supports 75cm c/c complying with standard specification and directed 10sqm.

RCC Beam & Slabs

Column upto substructure

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For Foundation

Ground floor to 1st floor level

1st level to terrace floor level

Above the terrace floor level

Supplying and fabricating and placing in position MS grills for reinforcement including cost of steel for all works. The rate including cost of binding wire also (SS NO 134)

Brick work in Cement Mortar 1:5 using 2nd class ground moulded Chamber bricks size 9" x 43/8" x 23/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Foundation & Basement 1:5

Ground floor 1:6

First Floor 1:6

Second Floor 1:6

Brick Partition wall in CM 1:3 of 115mm thick. Using country brick of size 83/4"x41/4"x2 3/4" including plastering both aces with cm 1:5, 12mm thick - 10 cum complete complying with standard specification.

Ground floor

First Floor

Supplying and filling of well gravel in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Special plastering for R.C.C. slab beam and sunshades with Cement mortar 1:3, 10mm thick including cost and conveyance of all materials and labour charges, curing etc. complete complying with standard specifications.

Plastering with Cement mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Cuddapah slabs of the following thickness over a Brick partion walls for cubboard and pointed with cement mortar 1:3 ( one cement and three sand) complying with standard specification.

Weathering course concrete with broken jelly 20mm size and pure slaked lime over RCC roof slab, the proportion being 32:12.5 for required depth of 80mm for giving required slope and thickness of roof on required, well beaten with wooden beater etc, complete with standard specifications.

Finishing the top of roof with one course of machine pressed tiles 20cmx 20cmx20mm of approved quality laid in cm 1:3,12mm thick mixed with water proofing compound 2% by weight of cement used etc, complete with standard specifications.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Paving the floor with Stain Free Nano Polish Vitrified Tiles of size 600 x 600 x 8 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-site and pointed with same colored cement.

Paving the floor with Ceramic Tiles (300x300x6mm) step tiles of in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-site and pointed with same colored cement.

Dadooing walls with Glazed tiles of sizes 300 X 450 X 8mm size of approved make and quality and color lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

Supplying and fixing of Flush door shutter using Teak wood frame of size 127mm x 76mm and Door shutters Single leaf in position using 35mm thick solid core Flush shutters with teak play on both sides with teak wood lipping alround including cost and labour for fixing the hold fasts and furniture fittings etc.,complete as directed by the departmental officers complying with standard specification.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter (with frame)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc, complete complying with standard specifications including one coat zine chromate primer.

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dualflush fittings with normal seat cover Wall Fitting

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing CP Two Way Bib Cock with Health Faucet with flow Rate of 3.78 LPM at 3 Bar pressure including flexible hose 1m/1.2m long connection and holder for hand spray ,making good the same, complete.of Engineer-in-charge.

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supplying and fixing in position C.P.Shower rose Shower Rose - 100mm dia & CP Wall Mixture Tap 3 in 1 system with Hand Showers of approved make confirming to IS specifications and qulity including cost of Shellac thread etc. complying with standard specification.

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.

Supplying and fixing in position earthenware Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class G.I. waste water pipe and 32mm dia C.P. waste coupling.

Supplying and fixing in position SS Swan Neck Tap suitable with kitchen sink etc. complete complying with standard specification.

Supplying and fixing in position Indian make bewelled edge mirror of size 500 x 450mm quality including cost of Rawal plugs, brass screws. etc. complying with standard specification.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification.

Internal Water Supply P.V.C. Pipes (10Kg/SqCm) Supplying laying and jointing P.V.C pipes (10Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

20mm dia Pipe conceled water supply

25mm dia Pipe

32mm dia Pipe

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

Coupler 20mm conceled

Coupler 25mm dia Pipe

Coupler 32mm dia Pipe

Elbow 20mm conceled

Elbow 25mm dia Pipe

Elbow 32mm dia Pipe

Bend 20mm conceled

Bend 25mm dia Pipe

Bend 32mm dia Pipe

Tee 20mm conceled

Tee 25mm dia Pipe

Tee 32mm dia Pipe

End Cap 20mm dia x 15mm

End Cap 25mm dia x 20mm

End Cap 32mm dia x 25mm

Reducer 20mm dia x 15mm

Reducer 25mm dia x 20mm

Reducer 32mm dia x 25mm

Reducer Tee 20mm dia x 15mm

Reducer Tee 25mm dia x 20mm

Reducer Tee 32mm dia x 25mm

Reducer Elbow 20mm dia

Reducer Elbow 25mm dia

Reducer Elbow 32mm dia

Jet Nipple 25mm dia

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25mm Gate Valve

65mm Gate Valve

Supplying and fixing of approved make of GM Non return valve, suitable for both horizontal & vertical application conforming to BS 1982 tested to a pressure of 15 Kg/sqcm. Including rubber gasket, flanges, union, nuts, bolts, washers & painting complete as required, shutter of brass/SS304 conforming to ASTM B159. as directed by Engineer-Incharge.

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

110mm dia Pipe internal drainage

75mm dia Pipe

50mm dia Pipe

Supplying PVC Specials P.V.C pipes soil/ waste pipes (with working pressure 6 kg. / sq.cm.) in water supply arrangements (both in internal and external drainage arrangements

Elbow 110mm Pipe

Elbow 75mm Pipe

Elbow 50mm Pipe

Tee 110mm Pipe

Tee 75mm Pipe

Tee 50mm Pipe

Bend 110mm Pipe

Bend 75mm Pipe

Bend 50mm Pipe

"Y" 110mm Pipe

"Y" 75mm Pipe

Reducer 110mm x 75mm

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Construction of sewer chambers of internal dimension of 600x600mm depth upto 1 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)

Construction of sewer chambers of internal dimension of 900x900mm depth upto 1.2 Mtr depth with brick masonry in cement mortor 1:5 thickness of masonry 225 mm, 1:3:6 cement concrete foundation 150 mm thick over 150 mm sand bed, channelling in 1:2:4 cement concrete, plastering in 1:3 cement mortor for internal and external surface finished with floating coat of neat cement. SFRC make Heavy duty manhole cover (600x600) with frame,CI step 300mm.and fixed over 100 mm P.C.C. making arrangement for manhole cover seating, necessary exacavation and backfilling.(Observed OD)

Supplying laying and jointing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride)(Schedule-80) pipes complete with necessary solvent cement weldable fittings, confirming to ASTM F-441 for water supply piping in the pumping system. The pipes shall be erected plumb in the risers. Erection of the above pipe including cutting, jointing of pipes with necessary fittings, erection of the pipes plumb to vertical, clamping the pipes on to MS Hot dip galvenized clamps, pressure testing of pipes, complete.. The pipes shall be laid burried Laying work to include excavating the necessary trenches,cutting and jointing and laying the pipes in the trenches.after laying and pressure testing of pipes, the excavated earth shall be back fill and compacted any excess shall be removed from site.

50mm dia UPVC

Supplying UPVC Specials pipes UPVC in water supply arrangements (external Hydro Pneumatic System Pumps arrangements)

Elbow 50mm Pipe

Tee 50mm Pipe

Bend 50mm Pipe

Coupler 50mm Pipe

Supplying laying and jointing P.V.C pipes soil/ waste pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to the pipes shall be duly laid at site, with necessary cutting & jointing of pipe with approved quality jointing lubricant. The pipes shall be fixed properly aligned and laid to slope. Before handing over, leak test shall be carried out and any defects found shall be rectified. Work shall also include necessary excavation and back filling 'with compaction etc, as directed by Engineer- Incharge (For sewer and Sullage line).

160mm dia Pipe

110mm dia Pipe

Supplying and fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

110 mm dia

Supplying and fixing in position best quality P.V.C rainwater burried pipe (4 kg. per sq.cm) of various sizes having ISI mark and providing leakproof joints including fixing to the chamber with P.V.Cspecials etc., and making connection to all rain water chambers, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End

Supply and fixing of 20W 4 Feet LED tube light fitting (Havells make or equivalant)complete on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting

Supply and fixing of 7W/9W LED Bulb for BH point.

Supply and fixing of WT bulk head fittting with guard suitable with 7W/9W LED Bulb

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable GI box with push switch

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC Exhaust fan.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (for computer plug socket).

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 20A Flush type wall Socket 32A DP MCB complete set in Suitable size sheet steel enclosure Box for AC Plug in flush with wall with earth connection.(For AC plug).

Supply and fixing of 2Way sheet steel enclosure Box (metal) with 1 No 20 Amps DP MCB in flush with wall with earth connection only.(Higher end)

Supply and fixing of 4 way Horizontal Type Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection

Supply and fixing of 15A F/T modular switch in suitable size GI modular Switch box with Modular cover plate in flush wall.

Supply and fixing of 2-Tray Model cell phone stand made up of PVC material on wall

Supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable size PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and Run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour.

Supply and run of 4 of 6 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains

Supply and run of 4 of 6sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 32 mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains

Supply and fixing of 65mm (2-1/2”) GI pipe (Class ‘B’) of 6mtr. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonry pedestal with suitable MS box to house 2 no's 5A control switch 16A fuse unit (500V) etc. with suitable angle iron frame work, with door and with lock and key arrangements with supply and fixing of 2 no's 48W LED street light fitting (Higher end Philips/Havells/Equivalent) with 2 no's 1mt. of 32mm dia GI pipe (Class ‘B’) complete, with necessary MS clamps, on the above post with PVC unsheathed copper leads and with painting .

Supply and fixing of 65mm (2-1/2”) GI pipe (Class ‘B’) of 6mtr. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonry pedestal with suitable MS box to house 4 no's 5A control switch 16A fuse unit (500V) etc. with suitable angle iron frame work, with door and with lock and key arrangements with supply and fixing of 4 no's 48W LED street light fitting (Higher end Philips/Havells/Equivalent) with 4 no's 1mt. of 32mm dia GI pipe (Class ‘B’) complete, with necessary MS clamps, on the above post with PVC unsheathed copper leads and with painting ..

Supply and laying of 4x10 sq.mm PVC armoured LTUG Aluminium cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and laying of 4x10sq.mm PVC armoured LTUG Aluminium cable in suitable size 2" dia GI pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with sand and refilling the earth to make good.

Supply and clamping of 4x10sq.mm. PVC LTUG armoured Aluminium cable on post or on wall with MS clamps.

Supply and clamping of 4x10sq.mm. PVC LTUG armoured Aluminium cable on post with suitable class 'B' GI pipe of dia 32mm (1-1/4") on post or on wall with MS clamps..

Supply and fixing of brass cable gland for 4x10sq.mm PVC LTUG armoured Aluminium cable with earth connection.

Earthing as per PWD standard with an earth electrode of 2 metre Class'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor/ground for earth connection.

Sub Total

S.R.CONSTRUCTION (BID ID -1249611)

Sri Masadachi Amman Construction (BID ID -1248688)