Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.2 L+₹1.2 L (11.5%)Rejected-AOC HIMACHAL PRADESH HP | KANGRA | HIMACHAL PRADESH | 176093 | L2 | Rejected-AOC L2 | |
| 3 | L3₹11.4 L+₹1.3 L (13.2%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹11.6 L+₹1.5 L (14.6%)Rejected-AOC ESD NO II UHL STAGE III BVPCL CHULLAH | LANGNA | MANDYA | KARNATAKA | 571401 | L4 | Rejected-AOC L4 | |
| 5 | L5₹12.4 L+₹2.3 L (22.8%)Rejected-AOC | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | ANIL KUMAR L4 | ABHISHEK L2 | Abhishek Kashyap L1 | SRK INFRATECH L3 | HR CONTRACTOR L6 | shashikant L8 | Tek Chand L7 | Lal Singh L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock | 21.38 | Cubic Metre | 249 ₹5,323.62 | 200 ₹4,276 | 250 ₹5,345 | 160 ₹3,420.8 Lowest | 300 ₹6,414 | 300 ₹6,414 | 250 ₹5,345 | 345 ₹7,376.1 |
| 2.00Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge. | |||||||||||
| 2.10 | a).. 1:2: 4 (one Cement : two sand : four graded stone aggregate 20 mm (twenly milimetre) nominal size.
. | 2.1 | Cubic Metre | 6,997 ₹14,693.7 | 4,500 ₹9,450 Lowest | 7,000 ₹14,700 | 6,600 ₹13,860 | 6,500 ₹13,650 | 6,500 ₹13,650 | 6,200 ₹13,020 | 9,500 ₹19,950 |
| 2.20 | b). 1:3:6 (one Cement : three sand : six graded stone aggregate 20 mm (twenly milimetre) nominal size. | 15.2 | Cubic Metre | 4,900 ₹74,480 | 4,500 ₹68,400 Lowest | 4,500 ₹68,400 Lowest | 5,500 ₹83,600 | 6,000 ₹91,200 | 6,000 ₹91,200 | 5,200 ₹79,040 | 8,800 ₹1,33,760 |
| 2.30 | c). 1:5:10 (one Cement : five sand : ten graded stone aggregate 40 mm (fourty milimetre) nominal size | 4.1 | Cubic Metre | 4,500 ₹18,450 | 4,000 ₹16,400 Lowest | 4,100 ₹16,810 | 4,500 ₹18,450 | 4,500 ₹18,450 | 4,350 ₹17,835 | 4,200 ₹17,220 | 5,700 ₹23,370 |
| 3.00 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in respect as per satisfaction of Engineer-in-Charge. | 1,837.5 | Kilogram | 105 ₹1,92,937.5 | 85 ₹1,56,187.5 Lowest | 95 ₹1,74,562.5 | 88 ₹1,61,700 | 88 ₹1,61,700 | 98 ₹1,80,075 | 97 ₹1,78,237.5 | 108 ₹1,98,450 |
| 4.00 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge. | 865.53 | Kilogram | 105 ₹90,880.65 | 85 ₹73,570.05 Lowest | 100 ₹86,553 | 88 ₹76,166.64 | 95 ₹82,225.35 | 100 ₹86,553 | 97 ₹83,956.41 | 110 ₹95,208.3 |
| 5.00 | Square/ rectangular/ round Hollow tube work work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge. | 1,213.72 | Kilogram | 115 ₹1,39,577.8 | 88 ₹1,06,807.36 Lowest | 110 ₹1,33,509.2 | 98 ₹1,18,944.56 | 100 ₹1,21,372 | 110 ₹1,33,509.2 | 102 ₹1,23,799.44 | 105 ₹1,27,440.6 |
| 6.00 | Square/ rectangular/ round Hollow tube work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. complete in all respect as per satisfaction of Engineer-in-Charge a). In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 491.57 | Kilogram | 115 ₹56,530.55 | 88 ₹43,258.16 Lowest | 115 ₹56,530.55 | 105 ₹51,614.85 | 115 ₹56,530.55 | 110 ₹54,072.7 | 102 ₹50,140.14 | 110 ₹54,072.7 |
| 7.00 | Providing and fixing fly proof wire gauge to windows, clerestory windows and doors with MS flat 15x3 mm and nuts & bolts complete complete in all respect as per satisfaction of Engineer-in-Charge. a). Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperture on both sides | 150 | Square metre | 540 ₹81,000 | 550 ₹82,500 | 18 ₹2,700 Lowest | 500 ₹75,000 | 800 ₹1,20,000 | 1,350 ₹2,02,500 | 347 ₹52,050 | 200 ₹30,000 |
Tender Value
₹11.6 L
EMD Value
₹23,500
Closing Date
18 Aug 2025, 10:00 amClosed
Executive Engineer
Dr. YS Parmar, UHF, Nauni
Providing Chain link fencing of COHF Thunag at Atal Aadarsh Vidhayala Gudehari, Gohar Mandi
2025_YSPU_112023_1
No.UHF/Const.-1/Partfile /2025/-1344 dated 11.08.2025
Open Tender
Civil Works
Item Rate
60 days
Gohar
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
EE Dr YSPU
₹23,500
23 Sept 2025
11 Aug 2025
18 Aug 2025
11 Aug 2025
18 Aug 2025
11 Aug 2025
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas in all width and depth on plan) including getting out and disposal of excavated earth all leads, lifts and carriage of material as directed by the Engineer-in-charge .a). Ordinary rock
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete in all respect as per satisfaction of Engineer-in-Charge.
a).. 1:2: 4 (one Cement : two sand : four graded stone aggregate 20 mm (twenly milimetre) nominal size. .
b). 1:3:6 (one Cement : three sand : six graded stone aggregate 20 mm (twenly milimetre) nominal size.
c). 1:5:10 (one Cement : five sand : ten graded stone aggregate 40 mm (fourty milimetre) nominal size
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in respect as per satisfaction of Engineer-in-Charge.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge.
Square/ rectangular/ round Hollow tube work work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge.
Square/ rectangular/ round Hollow tube work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. complete in all respect as per satisfaction of Engineer-in-Charge a). In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
Providing and fixing fly proof wire gauge to windows, clerestory windows and doors with MS flat 15x3 mm and nuts & bolts complete complete in all respect as per satisfaction of Engineer-in-Charge. a). Galvanised MS wire gauge with 0.63 mm dia wire and 1.4 mm aperture on both sides
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge (Tata/ Jindal/ JSW make).
Providing and fixing pre-coated galvanized iron profile/ linner sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.32 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during Transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindal Make)
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc. complete in all respect as per satisfaction of Engineer-in-Charge (Tata/ Jindel/ JSW make)
a). Ridges plain (500 - 600mm)
b). Barge board (Upto 300 mm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as required complete in all respect as per satisfaction of Engineer-in-Charge.a) Two or more coats on new work.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm and 4mm dia including strengthening with nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Supplying, straining and fixing of 4mm plain mild steel galvanized wire to wood, concrete or steel standards and or to straining Boards including securing with galvanized iron type wire galvanized iron and staples or steel pins etc. complete in all respect as per satisfaction of Engineer-in-charge.
ABHISHEK (BID ID -544645)
SRK INFRATECH (BID ID -544505)
ANIL KUMAR (BID ID -544798)
Lal Singh (BID ID -544843)
HR CONTRACTOR (BID ID -544755)
Tek Chand (BID ID -544854)
shashikant (BID ID -544900)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .