SPL REPAIR TO BLDG NO T-313 AT URI AND PROVN OF CERTAIN OTHER WORKS AT RAMPUR AND URI UNDER GE 969 EWS

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

Removing excavated soil exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

M & L for 75 mm thick Plain Cement concret of type D2, 1:4:8 20 mm graded aggregate) in subbase, complete all as specified and as directed.

M & L for Non skid/matt finish ceramic tiles 7 to 8 mm thick of size 400x 400 or more, in floors etc.set and jointed in neat slurry and pointed in white or coloured cemment to match for joint free over Screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes, complete all as specified and as directed.

M & L for Glazed ceramic tiles in vertical surface(skirting) 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match for joint free over backing of 10 mm tk CM(1:4) on fair faces of brick work or concrete surfaces, complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate, complete all as specified and as directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius with built in CM (1:4), , complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, complete all as specified and as directed

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 1mm putty, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

Use and waste of form work to sides of foundation/footings, plinth beams and similar work for rough finished surfaces, complete all as specified and as directed.

Use and waste of form work to sides of columns and pillars for for fair finished surfaces, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in footings, plinth beams and the like, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in columns and pillars, complete all as specified and as directed.

M&L for Reinforced Cement Concrete M-30 design mix controlled concrete (Using 20mm graded granite stone aggregate) in lintel beams, roof beams lintle beams and the like, complete all as specified and as directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

All as per above item No. 20 but 6mm to 8mm dia bars, complete all as specified and as directed.

Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F MS Cold rolled Butt hinges medium weight 100 mm long, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy, complete all as specified and as directed.

S & F Aluminium handles, cast type,anodised of size 150 mm , complete all as specified and as directed.

S & F of 150mm Aluminium anodised,barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be including.

S & F vitreous China squatting pan, ‘Orissa’ pattern with P or S trap, size 580 x 440 mm white, with integral foot rests with PVC flushing cistern of 10 Litre capacity and flush pipe, complete all as specified and as directed.

S&F, vitreous China ware wash hand basin white of size 550 x 400mm incl CP waste coupling and PVC waste pipe and MS steel brackets all as spd as in repairs, complete all as specified and as directed.

S & F for Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.

S & F for 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and as directed.

S & F 25mm internal dia PP-R Ball valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F for 25mm bore dia PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and as directed.

S & F waste coupling CP brass (half or full threaded) 32 mm dia, complete all as specified and as directed.

S & F Grating square 150 mm size of PTMT (Minimum weight 100gms), complete all as specified and as directed.

S & F for PVC flexible connections 15mm size with PTMT nuts of length 450mm long, complete all as specified and as directed.

S & F for 15mm bore dia Stop valves fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S & F 20mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

S & F 15mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed.

M & L for 75mm thick Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) in Plinth Protection and finished even and smooth without using extra cement, complete all as specified and as directed.

S & F for PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius with axis door, complete all as specified and as directed.

S & F for PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) bends any radius with axis door, complete all as specified and as directed.

S & F for PVC (SWR) pipes 40 mm dia fixed to walls, complete all as specified and as directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

PVC (SWR) gully trap 150 mm, setting and jointing with solvent cement including grating, complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and as directed.

S & F PVC (SWR) 110mm Junction single (single T) equal or unequal, complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil all as specified and directed, complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in fdn of manholes etc complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface chanels and drains of manholes etc, complete all as specified and as directed.

150 mm bore (internal dia) Reinforced Concrete pipes, class NP-3 laid in trenches and jointed on concrete bed to required slope jointed and plasted complete all as specified (concrete bed cell be measure and paid separately), complete all as specified and as directed.

M&L PCC 1:3:6 type D-2 using 40 mm crushed graded stone agg as in bed to drain pipes,150 mm bore including packing under haunching against the sides of pipe after they are laid and tested, complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in bed plates bends coping benching etc including slighting mouled or chamferred edges, complete all as specified and as directed.

Extra for forming fair finished to drain or channels up to 30 cm inner girth in cement concrete using extra cement including necessary forms/moulds etc, complete all as specified and as directed.

M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces mixed with water proofing compound as per manutrs instructions surfaces finished even and smooth without using extra cement, complete all as specified and as directed. Note : WPC shall be measured and paid separately)

Supply only water proofing compound, complete all as specified and as directed.

Pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manholes cover set in CM 1:6 including necessary form work complete all as specified and shown on drawings (Reinforcement and MS handle shall be measured paid for separately)

Construction of LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water for 10 users complete all as specified and shown on drawings.

Construction of Soakage well 1.8m internal dia and 3.0 m effective depth complete all as specified and shown on drawings, complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm in deep and getting out in any type of soil, complete all as specified and as directed.

M&L for new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 2 mm putty, complete all as specified and as directed.

Supply and fixing MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W complete all as specified and as directed.

S&F 30mm thick factory made flush shutters , solid core construction , with block board core and ply wood face panels commercial type on both sides fixed to chowkhats etc, complete all as specified and as directed.

M&L preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed, complete all as specified and as directed.

S & F for Soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S & F of Towel ring Round with round flange, complete all as specified and as directed.

S & F two way bib cock, CP, Fancy type - 15mm dia, complete all as specified and as directed.

S & F Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look , complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

S & F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A , complete all as specified and as directed.

S & F 12mm Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

M&L for machine cut kota slab flooring 20-25mm thick over20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 25mm thick (20mm graded aggregate) as in floors etc, complete all as specified and as directed.

Demolition of PCC in ground floors & pavings exc 15 cm thickness (below or above ground level), Complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins arches pillars etc all as directed.

Taking down cement plaster on brick work or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

M&L 4mm thick veneered decorative, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber work of soft wood 75mm x 50mm on ceiling and 50mm x 50mm on wall @600 mm c/c both side, complete all as specified and as directed. Note :- The rate quoted shall be included timber frame work & biding as per required.

Dismantling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm, complete all as specified and as directed

S&F second class hardwood plain fillets square, rectangular in section exc 3 Sqcm and not exc 6 Sqcm, complete all as specified and as directed.

Preparation of old painted steel surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surface of walls and applying two coats of cement based paint and removal of rubbish off the premises upto a distance not exceeding 50 meteres, complete all as specified and as directed.

Hacking out old broken glass of any thickness ,size, quality or description from wooden /metal frames, complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality & glazing with oil putty or wooden beads in square not exc 0.5 Sqm each panes, Complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.4 mm with fixed with mild steel flat iron 25m x 3mm/ screws to windows, complete all as specified and as directed.

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering complete all as specified and as directed.

M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4, complete all as specified and as directed.

M&L for Brick work with sub-class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6

M&L for RCC (Design mix) M-30 (20 mm graded stone aggregate) as in slab supported on walls, Beams and columns and in strut & the like.

Form work to soffit of suspended slabs such as roof slabs, floors slabs n..exc 200 mm thick for rough finishes.

S&F framed work such as grills, gratings etc with end of bars shouldered and/or rivited framed guard bars, barred iron doors,ladders & similar work confirming to FE 290 Gde E-165

S&F steel windows with side hung shutters weld projecting type hinges with steel handles & steel peg stage complete with georing bars welded, complete all as specified and as directed.

S&F plain black mild steel sheeting 1 mm thick in each board, complete all as specified and as directed.

M&L for preformed particle board /Tiles for insulation purpose 60x60 cm size fixed with staples on & incl anodised aluminium snap grid of size 605x605 mm frame work for false ceiling, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thk laid & joined with grey cement slurry mixed with pigment to match the shade over 15 mm thk cement screed in CM 1:3 over cement & slurry @ 3 kg/sqm including rubbing & polishing, complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thk in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade over 15 mm thk cement xcreed in CM 1:3 over cement & slurry @ 3 kg/sqm including rubbing & polishing, complete all as specified and as directed.

M&L hard core of gauge n.exc 63 mm broken stone of boulders ,deposited ,spread & levelled in layers nexc 15 cm thk watered & rolled to true surface, complete all as specified and as directed.

M&L 5 mm thk rendering in CM (1:3) of fair faces of concrete surface finished even & fair without using extra cement, complete all as specified and as directed.

M&L 10 mm thk rendering of fair faces of concrete surface finished even & smooth without using extra cement CM 1:6, complete all as specified and as directed.

M&L for two coats of cement base paint over newly plastered surfaces, complete all as specified and as directed.

M&L for two coats of OBD over a coat of primer incl preparation of new surfaces, complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surfaces, complete all as specified and as directed.

M&L for two coats of red oxide primer incl preparation of new steel surfaces, complete all as specified and as directed.

M&L for three coats of white wash on soffits / slab, complete all as specified and as directed.

M&L for 60mm thick machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 grade with grey cement and pigment, complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated screned PVC bedded galvanized steel strip or wire armoured elect power cable 1100 volt grade with standard aluminium conductor of size 16 Sqmm 2 Core, complete all as specified and as directed.

Returning filling in, of excavated soil in trenches incl spreading, leveling, watering and well ramming in layers each layers n.exc 25cm thick in soft/loose soil, complete all as specified and as directed.

Removal surplus spoil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point, complete all as specified and as directed.

Supply and spread river sand to required width at bottom and top for cable cushioning all as specified in clause 19.75 of SSR part – I (Note :- thickness of sand will be measured after punning)

Supply and lay common burnt bricks of sub class B old size laid at right angle on the cable complete in trenches for cable protection, complete all as specified and as directed.

S & F GI tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors and including taking down existing GI/CI pipe for the following sizes complete all as specified and directed by Engr-in-Charge:- .

(a) 20 mm bore size

(b) 25 mm bore size

S&F Gun metal gate valve 20 mm bore with iron hand wheel head , screwed both ends for iron pipes and fixed complete including dismantling old and unsv, complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and exc 1.5m but not exc 3.00 m in depth for foundation etc getting out in hard /dense soil, complete all as specified and as directed.

M&L for PCC 1:3:6 type D-2 (using 40mm graded agg) as in foundations, fillings and mass concrete, complete all as specified and as directed.

M&L for sand filling 30mm thick under floors or in foundations including watering and consideration, complete all as specified and as directed.

M&L for Non-skid ceramic tiles 7 to 8mm thick area of each tile exc. 0.18 Sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in CM (1:4), complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4), complete all as specified and as directed.

S&F in repair Vitreous China one piece wash down water closet pan (Pedestal pattern) including flushing cistern, seat cover and all necessary fittings, white complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly, complete all as specified and as directed.

(a) One light point/fan point/Ex fan point/bell point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on same board with accessories

(b) One 3 pin 5 Amp switch socket outlet on independent board

S&F switch piano Flush type, single pole, one way 5 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 Amps flush type,universal,complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor, complete all as specified and as directed.

S&F Switch socket combination 2 in1, 3 pin,5 and 15Amp flush type,universal, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

S&F in repair Lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and as directed.

S&F LED Lamp 9 W 'T' type, complete all as specified and as directed.

S & Fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and as directed.

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, complete all as specified and as directed.

S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires , complete all as specified and as directed.

S & F in repairs MCB, SPN 32 Amps 240 Volts C curve, complete all as specified and as directed.

S & F in repairs MCB, DP 40 Amps 240 Volts C curve, complete all as specified and as directed.

S & F MCB SP 6 to 32 Amps, 240 Volts, C Curve complete all as specified and directed.

S&F Air circulator fans 230 volts single pahse oscillating 400mm sweep suitable for wall mounting, complete all as specified and as directed.

S&F Bulkhead luminarie comprimsing of high brightness LEDs 9/10 W LED IP 65/66, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc.

Note:- Schedule of credit Rs 13,748.50 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

m/s mohd rafiq lone (BID ID -3333176)

M/S DALJIT SINGH TULLA (BID ID -3320713)