ARC (Annual Rate Contract) for routine maintenance & servicing of HT/LT equipment’s, control panels for Water Supply Scheme at Notified Area GIDC, Sachin Estate 2026-27.

Name ARC (Annual Rate Contract) for routine maintenance & servicing of HT/LT equipment’s, control

Of panels for Water Supply Scheme at Notified Area GIDC, Sachin Estate 2026-27.

RATE/ NET RATE/

Sr. No. DESCRIPTION OF ITEM QTY. UNIT

UNIT in RS. UNIT in Rs.

PART - A Labour Works

Labour charges for Round the clock Routine Preventive Maintenance of

below Panels. It includes the Attending the fault and Complete Control

Panels Servicing / Repairing /Cleaning of all panels with checking of all

the terminals of Star Delta Connectors/Over load Relay/Single Phase

Preventer /Timers/ Auto Transformer. Checking of all the Lugs & Nut-

1 bolts condition and if found unhealthy then cleaning of all the Rust and

Deposited Carbon on faulty Terminal. It means the job include the

Complete Repair & Maintenance of all the panels per month or as an

when required with all contact kits Cleaning, Tightening of

Connections, Power & Control wiring repairing / Replacement of panel

accessories (if required)

a up to 5HP 60.00 Job 306.84

Labour charges for Round the clock Routine Preventive Maintenance of

below variable frequency drive. It includes the Attending the fault and

Complete variable frequency drive Repairing/Servicing /Cleaning of all

Drive with checking of all the terminals of VFD/Over load Relay/Single

Phase Preventer /Timers/ Auto Transformer. Checking of all the Lugs &

2 Nut-bolts condition and if found unhealthy then cleaning of all the Rust

and Deposited Carbon on faulty Terminal. It means the job include the

Complete Repair & Maintenance of all the variable frequency drive per

month or as an when required with all contact kits Cleaning, Tightening

of Connections, Power & Control wiring repairing / Replacement of

VFD accessories (if required)

a Drive, Make- ABB 75 HP 24.00 Job 1309.71

b Drive, Make- ABB 30 HP 24.00 Job 1309.71

c Drive, Make- ABB 10/15 HP 12.00 Job 1309.71

d Drive, Make- Yaskawa F7 60 HP 60.00 Job 1746.27

e Drive, Make- Yaskawa F7 120 HP 12.00 Job 1746.27

Labour Charges for Servicing of 11KV 4 Pole / 2 poles DP Structure

with GOD switch / Do fuse unit / CTPT jumper with required

Maintenance like Servicing of Repairing / Oiling /Gresseing of Male

Female Contect of A.B. Switch inclusive of Discaling /Pitting of the fix

3 and moving Contacts. Servicing & Maintaining ACSR Conductor along 4.00 Job 20455.86

with its end connection for healthy condition. Cleaning & checking of

Lightning Arrestor Power & Earth terminals using conductivity

insulation resistance meter. Insulation Resistance Testing of all

insulators with 1000/2000 Meggar.

Routine Maintenance of 500 to 1000KVA Transformers. It includes the

Checking/ Servicing/ Maintenance of H.V. /L.V. Cable End Termination

and if required then replacement of H.V. / L.V. Side Lugs with Proper

4 Method with Required Tools like Crimping Machine. The Job also 4.00 Job 8635.95

includes the checking of Oil Level of Transformer/ Silica Gel Brether

Condition/ Day-farm Condition and attending the outside oil leakage

faults if found with replacement of Outer Side Gasket if necessary.

Labour Charges for Routine Maintenance / servicing of 1600Amp /

800Amp ACB LT Panel. It includes the Removal of old Grease and re-

greasing the same with recommended grease. Check condition of arcing

contact and gap between fixed and moving arcing contracts shall be

5 checked. Checking condition and alignment of jaw Contact. Checking 12.00 Job 21459.03

proper closing of all poles together. Checking the reset mechanism,

tripping of breaker through push button. Checking tripping of VCB

through protection release. Checking presence and proper tightening of

hardware. Checking condition of ACB wiring and replace if required.

Labour Charges for Routine Maintenance / servicing of various MCCB.

6 The Process includes the Complete Overhauling & Maintenance of 52.00 Job 2398.88

MCCB with cleaning of all contacts/ tightening of all hardware.

Labour Charges for Routine Maintenance / servicing of APFC Panel.

The Job includes the Checking of Operation of APFC Relay. End

Termination of all Capacitors in the Panels and condition of capacitors

with required equipment’s. And then after the re-installation of all

capacitors at appropriate compartment of APFC Panel & charge the

SITC of Advance Maintenance Free Earthing System: 48 MM Diameter,

made from low carbon steel pipe, wall thickness 3.2 MM, ISI Marked,

Copper Bonded, with 2 Nos. of Stainless Steel Nut & Bolts, Suitable for

Lug Size 40 MM x 6 MM x 100 MM, and cross section area 481 mm2,

to be used with Premium Grade Ground Improving Earthing Compound

in appropriate quantity.

Labour Charges for Earthing Resistance measurement with proper

method using Earth Resistance Meter.

Labour Charges for Transformer Painting with Compressor Spray

Painting. The process includes the proper di-scaling of rust from each &

every part of Transformer & then after paints the Transformer with Heat

Resistance Paint as per Standard Norms.

Labour Charges for 4pole / 2 pole DP structure painting. The process

includes the proper di-scaling of rust from each & every part of 4 Pole/

2 Pole Structure and then after paint 1 Coat of Red Oxide and 2 Coat of

Silver Paint with required manpower & materials.

PART-B SITC of Material

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with

Supplying & erecting directly operated single phasing preventer

complete erected and connected to supply up to 45 Amp. Range.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase

AC Supply 500 V on existing panel board with necessary connections.

Supplying and erecting approved make suitable panel indicator LED

type lamp, lens cover, complete erected with necessary connections.

17 SITC of Push button with elements 25.00 No. 175.81

18 SITC of Electronic Timer 5.00 No. 1318.59

SITC of Electronic Overload Relay with auto scrolling & all protection

20 SITC of 63A Contactor MNX400 L&T make 10.00 No. 6769.97

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having

normal current rating 125A. with Fixed thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having

Normal current rating 200A.with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S.housing

ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. and above at 415 V .

having normal current rating 250A. with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

SITC of Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at 415 V having Normal

current rating up to 320A with variable Thermal & magnetic release

suitable to work on A.C. supply 50 c/s. With all internal connections &

complete erected in existing 16 G.M.S. housing.ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 50 KA and above at 415 V

having Normal current rating 400A. with variable Thermal & magnetic

release suitable to work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 50 K.A. and above at 415 V

having normal current rating 800A.with variable thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S.housing. ICS=100% of ICU only Cat III

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load

28 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

a (a)6 to 32 Amp. Cat.III 4.00 Ea. 471.67

b (b)40 Amp. Cat.III 6.00 Ea. 488.84

c (c)63 Amp. Cat.III 8.00 Ea. 587.82

Providing and erecting Approved make Three pole moulded case circuit

breaker having breaking capacity ICU of 25 K.A. at 415 V having

normal current rating up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

Providing and erecting AC-3 duty 3 pole power contactors spare kits (L

& T, C&S, BCH,T.C. Siemens, make).

a (a) for 25 / 32 A rating 6.00 Ea. 3253.21

b (c) for 60 / 70 A rating 10.00 Ea. 8141.61

Supplying and erecting Direct On-line Electronics Starter with 2-5/4-

10/8-14/10-16 Amp. Rating relay (variable current setting) directly

operated in totally insulated elegant enclosure and 18 Amp. Rating

power relay with start - stop button for single phase operation up to 3 HP

as per complete erected on P.W. Block with following features. Low

voltage cut off below 140 V High voltage cut off above 280 V Overload

protection Indicating LEDs for motor on lv, hv & overload tripping.

Supplying and erecting Direct on line starter with 30 Amp. (resistive @

230v) power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T.

Operated electronic overload relay in engineering grade plastic enclosure

for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high voltage

protection (above 480 v) and under voltage protection (below 330 v)

current sensing single phasing protection. Reverse phasing protection,

inverse current characteristic overload protection with indication for On,

OL, HV,LV SPP in a single unit with feather touch start / stop push

button, high temperature with standing Bakelite terminals complete

erected on P.W. Block with necessary connection [Cat II]

Supplying and erecting push button operated fully automatic Star-Delta

starter with 3 Nos.of 32A. rating contactors and. 1 No. of directly

33 operated thermal overload relay having 20-32A range in sheet steel 8.00 Ea 12069.5

enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 35 H.P. complete

erected on (a)P.W. Block with necessary connection Cat.III

Supplying and erecting push button operated fully automatic Star-Delta

starter with 3 Nos. of 95A. rating contactors and. 1 No. of directly

34 operated thermal overload relay having 45-85A range in sheet steel 2.00 Ea 20895.63

enclosure for 3 phase 415V. 50 c/s. A.C. motors up to 60 H.P. complete

erected on (a)P.W. Block with necessary connection. Cat.III.

35 SITC of 25KVAR Capacitor 10.00 No. 11537.59

36 Neutral Link for (i) 32/63/125 Amps 30.00 Ea 137.36

Providing and erecting following additional parts for panel mounting

37 MCCBs (A)Extended operating rotary handle with pad lock with three 8.00 Ea. 873.65

position trip,off,on suitable for 25A to 250 A panel mounting cat-III

SITC of Providing and erecting following additional parts for panel

mounting MCCBs (B) Extended operating rotary handle with pad lock

with three position trip, off, on suitable for 400A to 800A panel

Supply of Approved make Iron Clad or metal clad four pole change over

switch 415V. confirming to IS of following capacity (B) 400 A Cat-lll

SITC of Approved make Iron Clad or metal clad four pole change over

switch 415V. confirming to IS of following capacity up to 450 A Cat-lll

Providing & erecting additional parts for Air Circuit Breakers as follows:

(A) Auxiliary Contact Block for CN-CS 800 to 2500 & 2 NO + 2 NC

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with

20 Amp. Plug socket, company fabricated powder coated sheet steel

enclosure erected as directed with connection. [A] Metal Clad Socket

with metal clad top

Providing and fixing approved make Perforated C type cable tray. Made

from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip

43 galvanizing as per IS 2629/4759. with max 17.5% perforation with 250.00 RMT 622.16

coupler plate / Fish plate and GI hardware like nut - bolt and washers etc.

erection with necessary support( included) as per Specification and as

per instruction of engineer in charge..(5) 300 X 50 X 2.0 mm Thick

Transformer oil having good resistance to high electrical stress, high di-

electric strength (50KV) low viscosity, low pour point, high flash point

and excellent thermal properties for efficient heat transfer and cooling as

Filtration of transformer oil as per I.S. for removal of moisture, carbon.

slurry etc.by means of circulating oil through vacuum pump from

heating elements and filters to with stand the breaking strength of the oil

above 40KV beyond one minute tested in oil testing Kit. (A) on site.

Replacing old and unserviceable gasket of Top cover plate of

Transformer having following capacity. (D)750 KVA

Replacing the breather of the Transformer of following capacity. (B)

KVA/750 KVA/1000 /1250 KVA

48 Inside painting of 250/ 315 / 500 / 750 / 1000 /1250 KVA transformer 5.00 Ea 1456.42

Outside painting of Transformer for the following capacity (B) 750 /

Supplying rubber matting of following thickness as per IS:15652/IEC

Providing and fixing printed instruction chart both in English and

51 Gujarati and duly framed with front glasses, for treatment of person 5.00 Ea 130.29

suffering from Electric shock with minimum 50" diagonally size.

Supplying & erecting ABC powder type 'Ceasefire' type Fire

52 extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp for 6.00 Ea 848.4

erection on wall

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

53 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

a (I) 3 1/2 core 240 Sq. mm (120 Sq. mm 1/2 core) 100.00 Mtr 1168.57

b (K) 3 1/2 core 400 Sq.mm ( 185 Sq. mm 1/2 core) 250.00 Mtr 1747.3

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

54 multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables.

a (C) 3 core 6 Sq. mm 200.00 Mtr. 107.06

b (D) 3 core 10 Sq. mm 300.00 Mtr. 131.3

c (E) 3 core 16 Sq. mm 309.00 Mtr. 143.42

d (G) 3 core 35 Sq. mm 300.00 Mtr. 190.89

e (I) 3 core 70 Sq. mm 260.00 Mtr. 321.18

f (k) 3 core 120 Sq. mm 250.00 Mtr. 500.96

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered

55 with textured/metallic /white front plate,modules erected with necessary 8.00 Ea 1133.22

connections as directed 1) 1 no. 6A/16A universal plug-switch

combined. 2)3 nos. 6A Switch 3). 3 nos. 6A 5 pin Plug For Modular

Type Accessories

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

% ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity between the ranges

shown.)(A) Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep

complete, canopy erected on existing hook or clamp with earthing [

Make shall be approved by Engineer in Charge]

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S.

Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm &

earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand copper wires upto max length of

mt, in below type of pipe erected with 6A Tissino Type ISI marked flush

60 type switch / bell push and accessories erected on Metal / PVC/Wooden 26.00 Pt 387.84

Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated

sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as

directed.(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

61 SITC OF 11KV 400Amp AB Switch 1.00 Nos. 28745.4

62 SITC OF 11KV DO Fuse Unit 1.00 Nos. 19472.69

63 SITC OF 1000KVA Transformer Radiator 2.00 Nos. 39872.65

SITC Of various spare part of ABB ACS 550 -125A MAKE 75HP VFD

AS and where Required as Below

a Diode Module 109A 6.00 Nos. 2837.7

b Capacitor Bank 8.00 Nos. 2837.7

c SMD Components 6.00 Set. 1004.11

d Control Card 2.00 Nos. 8294.8

e Semi Conductor Fuse 200A 2.00 Nos. 2182.84

f IGBT Module 200A 6.00 Nos. 6548.53

g IN Put Chock 300A 2.00 Nos. 10914.2

h Firing ICS 12.00 Nos. 436.57

i Power Board 2.00 Nos. 19645.57

j SMD & Firing Spares 10.00 Nos. 1309.71

SITC Of various spare part ABB ACS 550 MAKE 30HP VFD AS and

where Required as Below

a Diode Module 50A 2.00 Nos. 4191.06

b Capacitor Bank 16.00 Nos. 873.13

c SMD Components 6.00 Set. 1004.11

d Control Card 2.00 Nos. 7421.66

e Semi Conductor Fuse 200A 2.00 Nos. 2182.84

f IGBT Module 100A 2.00 Nos. 8294.8

g IN Put Chock 150A 2.00 Nos. 6548.53

h Firing ICS 12.00 Nos. 436.57

i SMD & Firing Spares 4.00 Set. 9167.93

j Power Board 2.00 Nos. 1309.71

SITC Of various spare part of ABB ACS 550 MAKE 10/15 HP VFD

AS and where Required as Below

a Diode IGBT Module Single Pack 40A 1.00 Nos. 5937.33

b Capacitor Bank 6.00 Nos. 873.13

c SMD Components 3.00 Set. 1004.11

d Control Card 1.00 Nos. 7421.66

e Firing ICS 6.00 Nos. 436.57

f Power Board 1.00 Nos. 6548.53

g IN Put Chock 300A 1.00 Nos. 4802.25

SITC Of various spare part of Yaskawa F7 Make 60 HP VFD AS and

where Required as Below

a Diode Module 53A 15.00 Nos. 4889.56

b IGBT Module 200A 15.00 Nos. 8120.17

c Firing ICS 30.00 Nos. 240.12

d SMD Components 15.00 Set. 1527.99

e Semi Conductor Fuse 200A 5.00 Nos. 1527.99

f Electrolightic Capacitor 3000 MFD, 400 Volt 20.00 Nos. 1964.56

g Power Board 5.00 Nos. 21391.84

h Control Card 5.00 Nos. 10914.2

i Capacitor Bank 30.00 Nos. 2837.7

SITC Of various spare part of Yaskawa F7 Make 120HP VFD AS and

where Required as Below

a Diode Module 6.00 Nos. 4889.56

b IGBT Module 200A 12.00 Nos. 8120.17

c Firing ICS 6.00 Nos. 240.12

d SMD Components 3.00 Set. 1527.99

e Semi Conductor Fuse 900A 1.00 Nos. 7421.66

f Electrolightic Capacitor 4000 MFD, 400 Volt 8.00 Nos. 3710.83

g Power Board 1.00 Nos. 24884.39

h Control Card 1.00 Nos. 12660.48

69 SITC of DO Wire 12.00 Kg. 569.39

70 SITC of Lugs various type Size 200.00 No. 122.02

SITC of Nut-Bolt(SS) full threaded with double washer Various type

pump set & panels

SITC of Nut-Bolt(MS) full threaded with double washer Various type

pump set & panels

SITC of Nut-Bolt(GI) full threaded with double washer Various type

pump set & panels

SITC of Knife / Blade / DIN type HRC fuse link capable to withstand

74 K.A. confirms to I.S. 13703 for following current capacity (B) 63 Amp 12.00 Ea. 363.6

to 100 Amp (Size 00 )

75 SITC of Internal Lock Various panel 4.00 No. 1464.14

76 SITC of AC to DC converter 4.00 No. 1626.83

Microprocessor Based LV Variable Frequency Drive, Suppl,

installation, testing & commissioning of 415 V Fully automatic

microprocessor based Variable Frequency drive for pump control

application as per general specification as under: The VFD unit shall

have modular construction, 6 Pulse Bridge rectifier, speed control by

means of sensorless vector control (open loop), high torque at low

frequencies, locking at high and low frequency settings, In-built PID

control, frequency accuracy of ± 0.1 % (min), frequency resolution of ±

0.1 Hz (min), protections against; a) overload (motor and drive), b) short

circuit, c) ground fault, d) input / output phase loss (open circuit), e)

stalling, f) input / output undervoltage (momentary power loss restart),

g) input / output overvoltage,h) over-frequency, i) Input surge, j) over

temperature of heatsink, k) loss of remote speed signal etc. The VFD

shall also have userfriendly programming software & it shall be capable

of at least two level parameter setting with password lock for critical

parameters,rogramming for I/Os, speed search function, copy

parameters (upload / download) to other identical unit, tuning to energy

saving mode (maximum efficiency), event / fault recording (last 5 faults

in non-volatile memory) & RS 485 communication port (MODBUS

RTU protocol) with required software., - 45 kW

Microprocessor Based LV Variable Frequency Drive, Suppl,

installation, testing & commissioning of 415 V Fully automatic

microprocessor based Variable Frequency drive for pump control

application as per general specification as under: The VFD unit shall

have modular construction, 6 Pulse Bridge rectifier, speed control by

means of sensorless vector control (open loop), high torque at low

frequencies, locking at high and low frequency settings, In-built PID

control, frequency accuracy of ± 0.1 % (min), frequency resolution of ±

0.1 Hz (min), protections against; a) overload (motor and drive), b) short

circuit, c) ground fault, d) input / output phase loss (open circuit), e)

stalling, f) input / output undervoltage (momentary power loss restart),

g) input / output overvoltage,h) over-frequency, i) Input surge, j) over

temperature of heatsink, k) loss of remote speed signal etc. The VFD

shall also have userfriendly programming software & it shall be capable

of at least two level parameter setting with password lock for critical

parameters,rogramming for I/Os, speed search function, copy

parameters (upload / download) to other identical unit, tuning to energy

saving mode (maximum efficiency), event / fault recording (last 5 faults

in non-volatile memory) & RS 485 communication port (MODBUS

RTU protocol) with required software., - 22 kW

SITC of fencing of Transformer yard at Water supply pumping station

suitable size require 624 sq ft including piller 40*40*3 connecting piller

79 pipe 25*25*3 and Gate size 5ft*6ft for yard entery with including civil 1.00 Job 255196.18

work and materials and one coat primar and final coat silver.etc.The job

carried out as par engineer in charge.

I / We agree to carry out the above work at ____________ % above the estimated rate ((In Words)

_________________________________________________) percentage above the Estimated Tender Rate.

I / We agree to carry out the above work at ____________ % below the estimated rate ((In Words)

_________________________________________________) percentage below the Estimated Tender Rate.

Estimated Amount Estimated Amount

Put to Tender Rs. 68,60,748.77/- Put to Tender Rs. 68,60,748.77/-

Add % Above Rs.______________ Deduct % Below Rs. ______________

Net Amount Rs.______________ Net Amount Rs. ______________

Net In Figure Rs. _____________ Net in Figure Rs. ______________

I / We have read the Condition mentioned in this tender and agree to abide by the same.

Note:- Estimated Cost put to tender is excluding GST and Including all other Taxes. GST will be paid additional as per

applicable rate prevailing from time to time and all other statutory liabilities are part of estimated cost and will be bound by

bidder. Prospective bidder may please by read carefully, app prevailing policy /Government Resolution (GT) of Govt. of

Gujarat (GoG)/competent authority, regarding GST and submit the price bid offer accordingly.

Sachin Notified Area

Signature of Contractor with Seal G.I.D.C.-SACHIN