SUPPLY,INSTALLATION,ERECTION OF LTUG CABLE

LT UG Cable- Materials

Supply of 2C x 10 sq.mm armoured aluminium LT XLPE UG Cable as per technical specification, approved drawings and scope of work.

Supply of 4C x 25 sq.mm armoured aluminium LT XLPE UG Cable as per technical specification, approved drawings and scope of work.

Supply of 4C x 95 sq.mm armoured aluminium LT XLPE UG Cable as per technical specification, approved drawings and scope of work.

Supply of 4C x 150 sq.mm armoured aluminium LT XLPE UG Cable as per technical specification, approved drawings and scope of work.

Supply of 4C x 300 sq.mm armoured aluminium LT XLPE UG Cable as per technical specification, approved drawings and scope of work.

Supply of 110mm Dia HDPE Pipe (for LT UG Cable 4Cx300Sqmm and 4Cx150Sqmm) as per detailed Technical Specification, approved Drawing & Scope of works

Supply of 50mm dia DWC Pipe with required accessories (For 2Cx10Sqmm & 4Cx25Sqmm Cables) as per technical specification, approved drawings and scope of work.

Supply of 75mm dia DWC Pipe with required accessories (For 4Cx95Sqmm Cables) as per technical specification, approved drawings and scope of work.

Supply of Double Compression gland with Al lugs suitable for 2C x 10 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Double Compression gland with Al lugs suitable for 4C x 25 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Double Compression gland with Al lugs suitable for 4C x 95 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Double Compression gland with Al lugs suitable for 4C x 150 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Double Compression gland with Al lugs suitable for 4C x 300 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Al lugs suitable for 2C x 10 sq.mm as per technical specification, approved drawings and scope of work.

Supply of Al lugs suitable for 4C x 25 sq.mm as per technical specification, approved drawings and scope of work.

Supply, Testing and Commissioning of straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required as per technical specification, approved drawings and scope of work. 4Cx300 Sqmm Cable

Supply, Testing and Commissioning of straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required as per technical specification, approved drawings and scope of work. 4Cx150 Sqmm Cable

Design, Supply, Testing an Commissioning of LT Distribution Feeder Pillars (Main) (120cm x 120cm x 50cm) consisting of 1200 Amps Busbar rating, 630A fuse base with 500A fuse link- 6 Set (1 incoming & 1 Outgoing); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-9 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps on Front Door, as per standard, technical specification, Approved Drawing and scope of work.

Design, Supply, Testing and Commissioning of LT Distribution Feeder Pillars (Main) (120cm x 120cm x 50cm) consisting of 1200 Amps Al Busbar rating, 630A,50KA,4P MCCB- 1 Set (For 4Cx300 Sqmm Cable from Transformer-Incoming) 630A fuse base with 500A fuse link- 6 Set (For 4Cx300 Sqmm Cable-2 Outgoings); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-9 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps on Front Door, as per standard, technical specification, Approved Drawing and scope of work.

Design, Supply, Testing an Commissioning of LT Distribution Feeder Pillars (Mini) (100cm x 100cm x 50cm) consisting of 1200 Amps Busbar rating, 630A fuse base with 500A fuse link- 6 Set (1 incoming & 1 Outgoing); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-3 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) Provision for Fixing of 1 No 3 Phase Energy Meter and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps on Front Door, as per standard, technical specification, Approved Drawing and scope of work.

Earthing as per approved drawings, technical specifications and scope of work: Supply of Spike Earthing 20mm solid GI Rod along with GI Nut, Bolt & Washers

Earthing as per approved drawings, technical specifications and scope of work Supply of GI Strip of size-25 x 3 mm for Connection of Earthing with euipment

Description of Work / Item(s)

LT UG Cable-Erection

Survey, route alignment & Feeder Pillar spotting, preparation of survey report and uploading in the GIS web portal after approval of Project Manager.

Removing of Foot path Tiles, Concrete, Bituminous Cutting and excavation of earth for the depth of 0.6 Mtr and width of 0.3 Mtr in all type of Soil including backfilling after laying of various type of LT Cables without damaging the Existing Utilities and as per technical specification, approved drawings and scope of work.

Laying of 4Cx300 Sqmm armoured aluminium LT XLPE UG Cable through 110mm Dia HDPE Pipe in the Existing Open Trench as per technical specification, approved drawings and scope of work.

Laying of 4Cx150 Sqmm armoured aluminium LT XLPE UG Cable through 110mm Dia HDPE Pipe in the Existing Open Trench as per technical specification, approved drawings and scope of work.

Laying of 4Cx95Sqmm armoured aluminium LT XLPE UG Cable through 75mm Dia HDPE DWC Pipe in the Existing Open Trench as per technical specification, approved drawings and scope of work.

Laying of 4Cx25Sqmm armoured aluminium LT XLPE UG Cable through 50mm Dia HDPE DWC Pipe in the Existing Open Trench as per technical specification, approved drawings and scope of work.

Laying of 2Cx10Sqmm armoured aluminium LT XLPE UG Cables through 50mm Dia HDPE DWC Pipe in the Existing Open Trench as per technical specification, approved drawings and scope of work.

Horizontal directional drilling along/ across roads, supplying and pulling 110mm dia HDPE pipe duct, in no case the depth of boring be less than 1.2m from ground level along/across road and 2m from ground level under railway track, pit making, pilot drilling, pre reaming, cable laying, closing of pits with normal soil and consolidation or by any method as directed by road authorities, without damaging other utility installations, providing HDD route markers at pit locations as per the direction of TCED officers and meggering, carrying out straight joints, providing loops wherever necessary, testing and commissioning and submission of final as built cable route drawings in GIS web portal after approval of Project Manager, including the cost of all materials, labour, charges for transporting, handling, uncoiling and paving of cable in duct using standard cable laying/pulling/winch equipments, etc except that of 4 core 300 Sqmm XLPE UG cable & 4 Core 150 Sqmm XLPE UG Cable, Straight through joint kit (Measurement will be taken only after cable laying) as per technical specification, approved drawings and scope of work.

Laying of 4CX150Sqmm armoured aluminium LT XLPE UG Cable through 110mm Dia HDPE Pipe in the Wall Surface using MS Clamp as per technical specification, approved drawings and scope of work.

Laying of 4Cx95Sqmm armoured aluminium LT XLPE UG Cable through 75mm Dia HDPE DWC Pipe in the in the Wall Surface using MS Clamp as per technical specification, approved drawings and scope of work.

Laying of 4Cx25Sqmm armoured aluminium LT XLPE UG Cable through 50mm Dia HDPE DWC Pipe in the Wall Surface using MS Clamp as per technical specification, approved drawings and scope of work.

Laying of 2Cx10Sqmm armoured aluminium LT XLPE UG Cable through 50mm Dia HDPE DWC Pipe in the Wall Surface using MS Clamp as per technical specification, approved drawings and scope of work.

Making, Testing and Commissioning of straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required as per technical specification, approved drawings and scope of work. 4Cx300 Sqmm armoured aluminium LT XLPE UG Cable

Making, Testing and Commissioning of straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1kV grade as required as per technical specification, approved drawings and scope of work. 4Cx150 Sqmm armoured aluminium LT XLPE UG Cable

Erection,Testing and Commissioning of Double Compression gland with Al lugs suitable for 2C x 10 sq.mm

Erection,Testing and Commissioning of Double Compression gland with Al lugs suitable for 4C x 25 sq.mm as per technical specification, approved drawings and scope of work.

Erection,Testing and Commissioning of Double Compression gland with Al lugs suitable for 4C x 95 sq.mm as per technical specification, approved drawings and scope of work.

Erection,Testing and Commissioning of Double Compression gland with Al lugs suitable for 4C x 150 sq.mm as per technical specification, approved drawings and scope of work.

Erection,Testing and Commissioning of Double Compression gland with Al lugs suitable for 4C x 300 sq.mm as per technical specification, approved drawings and scope of work.

Termination,Testing and Commissioning of Al lugs suitable for 2C x 10 sq.mm as per technical specification, approved drawings and scope of work.

Termination,Testing and Commissioning of Al lugs suitable for 4C x 25 sq.mm as per technical specification, approved drawings and scope of work.

Erection, Testing and Commissioning of LT Distribution Feeder Pillars (Main) (120cm x 120cm x 50cm) consisting of1200 Amps Busbar rating, 630A fuse base with 500A fuse link- 6 Set (1 incoming & 1 Outgoing); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-9 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps, including Civil Works for footing of Feeder Pillar Box as per standard, technical specification, Approved Drawing and scope of work.

Erection, Testing and Commissioning of LT Distribution Feeder Pillars (Main) (120cm x 120cm x 50cm) consisting of1200 Amps Busbar rating, 630A,50KA,4P MCCB- 1 Set (For 4Cx300 Sqmm Cable from Transformer-Incoming) 630A fuse base with 500A fuse link- 6 Set (For 4Cx300 Sqmm Cable-2 Outgoings); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-9 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps, including Civil Works for footing of Feeder Pillar Box as per standard, technical specification, Approved Drawing and scope of work.

Erection, Testing and Commissioning of LT Distribution Feeder Pillars (Mini) (100cm x 100cm x 50cm) consisting of 1200 Amps Busbar rating, 630A fuse base with 500A fuse link- 6 Set (1 incoming & 1 Outgoing); 400A Fuse base with 315A Fuse Link- 3 Set; (For 4Cx150 Sqmm Cable) 400A Fuse base with 250A Fuse link-3 Set; (For 4Cx95 Sqmm Cable) 3 Pole, 63A MCB- 2 Nos; (4Cx25 Sqmm Cable) 1 Pole, 32A MCB- 6 Nos; (2Cx10Sqmm Cable) Provision for Fixing of 1 No 3 Phase Energy Meter and rated neutral links in suitable cubicle fitted for outdoor applications along with phase indication lamps, including Civil Works for footing of Feeder Pillar Box as per standard, technical specification, Approved Drawing and scope of work.

Erection, Testing and Commissioning of Earthing as per approved drawings, technical specifications and scope of work: Spike Earthing 20mm solid GI Rod along with GI Nut, Bolt & Washers

Erection, Testing and Commissioning of Earthing as per approved drawings, technical specifications and scope of work GI Strip of size-25 x 3 mm for Connection of Earthing with euipment

Description of Work / Item(s)

Grand Total - Summary

TOTAL SCHEDULE NO. 1

Plant and Equipment

TOTAL SCHEDULE NO. 2

Installation / Erection Charges

TOTAL [3+5]

Discount offerred by Bidder(If any) (To be entered manually)

Schedule No 3: GRAND TOTAL [6 - 7]