The work of furnishing of KGS karunagappally Municipal Shopping Complex Building at Karunagappally in Kollam District.

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Secretary, Kerala Khadi and Village Industries Board, Vanchiyoor, Thiruvananthapuram

Name of Work:THE WORK OF FURNISHING OF NEW KGS AT KARUNAGAPALLY IN KOLLAM DISTRICT

Contract No: KB.955/2026/Engg

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Details of Work Item Code / Make Quantity Unit Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1.01 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes ( D S R 10.16.1 ) 100 Kg Excess(+) Full Conversion INR

1.02 Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling , partition etc. complete (frame work to be paid seperatately). 8 MM thick Cement fiber board as per IS: 14862 ( D S R 12.26.1 ) m2 Excess(+) Full Conversion INR

1.03 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: Gypusm Plaster Board of size 1200 x 2400 x 12.5 mm, with all 4 side tapered ( D S R 2016 12.45.1. ) 0.000 m2 Excess(+) Full Conversion INR

1.04 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: ( D S R 25.7. ) 0.000 m2 Excess(+) Full Conversion INR

1.05 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete . ( 2018 D S R 13.88 ) 0.000 m2 Excess(+) Full Conversion INR

1.06 Providing and applying Plaster of paris Putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. ( D S R 13.26 ) 0.000 m2 Excess(+) Full Conversion INR

1.07 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer ( D S R 13.43.1 ) 0.000 m2 Excess(+) Full Conversion INR

1.08 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work ( D S R 2018 , 13.52.1 ) 5 m2 Excess(+) Full Conversion INR

1.09 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. ( D S R 13.60.1. ) 0.000 m2 Excess(+) Full Conversion INR

1.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. ( D S R 13.61.1 . ) 0.000 m2 Excess(+) Full Conversion INR

1.11 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. ( 2018 D S R, 13.99.1 ) 0.000 m2 Excess(+) Full Conversion INR

1.12 Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coats applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface ( 2018 D S R 13.111.1 ) 0.000 m2 Excess(+) Full Conversion INR

1.13 Providing and fixing Aluminium work for Doors, Windows, Ventilators and Partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion - Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) ( D S R 21.1.1.3 ) 0.000 Kg Excess(+) Full Conversion INR

1.14 For Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) ( D S R 21.1.2.3 ) 5 Kg Excess(+) Full Conversion INR

1.15 Providing and fixing Double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness ( D S R 21.4.1. ) 1 no Excess(+) Full Conversion INR

1.16 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, For all leads including all lifts involved. ( D S R 2018 , 15.60 ) 5 m3 Excess(+) Full Conversion INR

1.17 LABOUR ENGAGED FOR REPAIR WORK , Beldar od20255/2024_2025 2 nos Excess(+) Full Conversion INR

1.18 Supplying and Fixing Good Quality Stainless Steel Door Handle For Glass Door of size 45 cm With all necessary screws, nut bolts etc complete as approved by the Engineer in Charge. ( Observed Data od 46046/2021-2022 ) 2 nos Excess(+) Full Conversion INR

1.19 Supplying and Fixing Openable Glass door lock of approved quality and make (EBCO OR EQUIVALENT ) with all necessary accessories etc complete. od20254/2024_2025 1 no Excess(+) Full Conversion INR

1.2 Supplying fabricating and fixing in position Sales counter with Granite / Glass top of 60 CM TOP WIDTH AND HEIGHT 80 CM ( AV ) ,made with frame work of 16 mm BWR ( IS 303 GRADE ) Plywood including covering the front and SIde , Providing inside Racks using 16 mm BWR ( IS 303 GRADE ) Ply wood, Covering all the exposed surface using 1.00 mm thickness decorative Laminated sheet with Texture Finish of approved brand with suitable adhesive ( HEATEX or equvqlent ), the inside of the counter being painted with synthetic enamel paint 2 coat over one coat of wood primer and putty leveling, filling etc. Providing 12 mm thic edge polished glass/ 18 mm thick egde polished Granite for the Top area with necessary glass caps or adhesives, providing 8 mm thick edge polished glass for the front vertical area with suitable D brackets , Finishing including polishing all the exposed area complete as per the approved drawings and direction of the Engineer in charge.. ( OBSEVED DATA od3_P100001/2019-2020 ) m Excess(+) Full Conversion INR

1.21 Supplying fabricating and fixing in position Sales counter with Granite / Glass top of 60 CM TOP WIDTH AND HEIGHT 80 CM ( AV ) ,made with frame work of 16 mm BWR ( IS 303 GRADE ) Plywood including covering the front and SIde , Providing inside Racks using 16 mm BWR ( IS 303 GRADE ) Ply wood, Covering all the exposed surface using 1.00 mm thickness decorative Laminated sheet with Texture Finish of approved brand with suitable adhesive ( HEATEX or equvqlent ), the inside of the counter being painted with synthetic enamel paint 2 coat over one coat of wood primer and putty leveling, filling etc. Providing 12 mm thic edge polished glass/ 18 mm thick egde polished Granite for the Top area with necessary glass caps or adhesives, providing 8 mm thick edge polished glass for the front vertical area with suitable D brackets , Finishing including polishing all the exposed area complete as per the approved drawings and direction of the Engineer in charge.. ( OBSEVED DATA od3_P100001/2019-2020 ) m Excess(+) Full Conversion INR

1.22 Supplying fabricating and erecting CASH cum PACKING Counter of 1 M height (av) with width and length 70 to 90 cm and 2.30 m respectively by using Frame work of 16 mm thick B W R ( IS 303 GRADE ) plywood including covering Front and Side , Providing inside partition, drayers, key board drayer, cupboards etc using 16 mm BWR ( IS 303 GRADE ) Plywood, Covering all the exposed surface with Suitable thickness Decorative laminated sheets with Texture Finish of approved brand and quality with suitable adhesive ( HEATEX or equvqlent ), Providing and fixing on Top portion with 12 mm thick edge polished plain glass with suItable 40mm x 12 mm spacers and in the secound hight counter portion providing Edge Polished granite or marble (jet black or galaxy) ,Including providing and fixing cupboard drawers with locking arrangement foot rest, Space for UPS, CPU etc. and all the inside area of counter being painted with two coats of synthetic enamel paint over a coat of wood primer after applying putty levelling filling etc. finishing all the exposed area with Polish etc complete all as per the approved drawings and direction of the Engineer in charge. m Excess(+) Full Conversion INR

1.23 Supplying and fixing Modiguard or Equivalent Brand glass Mirror over Frame work of 16 mm BWR Quality IS 303 Grade Play wood frame and covering the rear side with 12 MM BWR plywood and finishing all the exposed surface with 1.00 mm Thickness Decorative Laminated Sheets With Texture Finish of approved brand and shade , Fixing on Wall etc. complete as per the direction of Engineer in charge. 0.000 m2 Excess(+) Full Conversion INR

1.24 Providing and Fixing plywood Back ground panel made out of FRAME work using 16 mm BWR QUALITY ( IS 303 grade ) plywood at suitable spacing both horizontally and vertically, including making hole in the concrete/ masonry wall, with necessary SS hold fasts or SS screws of necessary size. Then Commercial plywood 12 mm thick B W R grade ( IS 303 Grade ) of approved make is fixed to the Exposed side of the frame work with screws of necessary size , all the exposed surface covered by 1.00 mm thickness Decorative Laminated Sheets with suitable adhesive ( Heatex or Equivalent ) including sealing all the joints and holes all as per the approved drawings and Direction of the Engineer in Charge . 0.000 m2 Excess(+) Full Conversion INR

1.25 Providing and fixing Wooden Display shelf with frame work using 16 mm thick IS 303 GRADE BWR Plywood , covering the frame work with 16 mm thick IS 303 Grade BWR Quality ply wood, covering all the exposed surface with suitable thickness decorative laminated sheet with Texture Finish using good quality addhessive ( Heatex or Equivalent ) providing 12 mm thick edge mechine polished glass for racks with necessary supports, all as per the drawing and Direction of the Engineer . 0.000 m2 Excess(+) Full Conversion INR

1.26 Providing and fixing TEAK wood frame work consisting of battens 100 x 50 mm For Fixed Glasing and Door , fixed with rawl plug and drilling necessary holes for rawl plug etc. including Polishing complete. For Fixed Glased Partitions and Doors 0.000 m3 Excess(+) Full Conversion INR

1.27 Providing and fixing Glazing in wooden frames using 12 mm TOUGHNED Glass of approved brand in Fixed partitions and glazed shutters for doors, (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). 0.000 m2 Excess(+) Full Conversion INR

1.28 Providing and fixing Glazing in Aluminium Partitions door, window and ventilator shutters etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With TOUGHNED GLASS panes of 12 mm thickness 0.000 m2 Excess(+) Full Conversion INR

1.29 Providing Name Board by Vinyle Sticker Work on Existing ACP PANNEL WORK as per approved Design 0.000 m2 Excess(+) Full Conversion INR

1.3 Providing and fixing DISPLAY SHELF , Horizontal Spacing 90 cm and vertical Spacing 45 cm with 40 MM AND 25 MM M S Hollow tubes, channels, plates etc., and 8 mm Glass , including welding, grinding, providing 2 coats of primer and 2 coat of Epoxy Paint ( SPRAY fiNISH ) etc complete, including fixing the Shelf to the Wall / Columns with necessary accessories & stainless steel dash fasteners , Providing 8 mm Glass of of required size, including polishing the exposed edges , all as per the Drawing and approval of the Engineer-in-charge, 0.000 m2 Excess(+) Full Conversion INR

1.31 Providing M S DISPLAY RACKS in Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding grinding and bolted with special shaped washers etc. complete. Hot finished welded type tubes ( D S R 10.16.1 ) 170 Kg Excess(+) Full Conversion INR

1.32 Providing and fixing 8.00 mm thick Float Glass panes as racks in MS Display Racks , Display Stand including grinding and polishing the exposed edges etc complete as per the architectural drawings and the directions of Engineer-in-charge m2 Excess(+) Full Conversion INR

1.33 Providing and fixing 10 mm thick Float Glass Panes as Racks in MS Display Shelves including grinding and polishing the exposed edges etc complete as directed by the Engineer in Charge 0.000 m2 Excess(+) Full Conversion INR

1.34 Providing and fixing WOODEN Display shelf for Ornamental Items ( RACK BEHIND CASH COUNTER ) with frame work using 16 MM BWR ( IS 303 GRADE ) PLY WOOD , providing 12 mm thick ( IS 303 GRADE ) BWR ply wood on rear side, covering the frame work with 16 mm ( IS 303 GRADE ) BWR ply wood, covering the exposed surface with suitable thickness Decorative laminated sheets of Texture Finish with addhessive of approved brand ( Heatex or Equivalent ) , providing 12 mm thick edge mechine polished glass for racks with necessary supports in the upper portion, providing 16 mm thick BWR ( IS 303 GRADE ) PLY WOOD SHUTTERS INCLUDING NECESSARY HINGES , HANDLES ETC for racks in the lower area, applying 1 coat of wood primer , putty finishing , synthetic enamel 2 coat all as per the drawing and Direction of the Engineer in Charge . 0.000 m2 Excess(+) Full Conversion INR

1.35 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. GROUP B ( D S R ELECTRICAL 1.10.2 ) Points Excess(+) Full Conversion INR

1.36 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required ( DSR Eectrical 2018, 1.55.3 ) Points Excess(+) Full Conversion INR

1.37 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 X 1.5 sq.mm ( D S R ELECTRICAL 1.17.3 ) m Excess(+) Full Conversion INR

1.38 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm ( D S R ELECTRICAL 1.17.12 ) m Excess(+) Full Conversion INR

1.39 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required. 3 x 4 sq. mm ( D S R ELECTRICAL 1.17.21 ) m Excess(+) Full Conversion INR

1.4 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 MM ( D S R ELECTRICAL 1.21.1 ) m Excess(+) Full Conversion INR

1.41 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 MM ( D S R ELECTRICAL 1.21.2 ) m Excess(+) Full Conversion INR

1.42 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch ( D S R ELECTRICAL 1.24.1 ) nos Excess(+) Full Conversion INR

1.43 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch ( D S R ELECTRICAL 1.24.3 ) nos Excess(+) Full Conversion INR

1.44 Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant ) 32A DP switch with indicator ( OD Electrical 90.10.3.15 ) nos Excess(+) Full Conversion INR

1.45 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet ( D S R ELECTRICAL 1.24.4 ) nos Excess(+) Full Conversion INR

1.46 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet ( D S R ELECTRICAL 1.24.5 ) nos Excess(+) Full Conversion INR

1.47 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. ( D S R ELECTRICAL 1.26 ) nos Excess(+) Full Conversion INR

1.48 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mmX75mm) ( D S R ELECTRICAL 1.27.1 ) nos Excess(+) Full Conversion INR

1.49 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm) ( D S R ELECTRICAL 1.27.2 ) no Excess(+) Full Conversion INR

1.5 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 Module ( D S R ELECTRICAL 1.27.4 ) no Excess(+) Full Conversion INR

1.51 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm) ( D S R ELECTRICAL 1.27.6 ) no Excess(+) Full Conversion INR

1.52 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). ( D S R ELECTRICAL 1.31 ) nos Excess(+) Full Conversion INR

1.53 Supplying and fixing following way, Three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator 4 + 18 way, Double door ) ( DSR ELECTRICAL 2 .4 .2. ) no Excess(+) Full Conversion INR

1.54 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole ( D S R ELECTRICAL 2.10.1 ) nos Excess(+) Full Conversion INR

1.55 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required ( D S R ELECTRICAL 2.11 ) no Excess(+) Full Conversion INR

1.56 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( 40 Amps ) ( D S R 2.12. 1 ) no Excess(+) Full Conversion INR

1.57 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( 63 Amps ) ( D S R 2.13. 2 ) no Excess(+) Full Conversion INR

1.58 Supplying and fixing following rating, Four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ( 63 Amps ) ( D S R 2.12. 2 ) no Excess(+) Full Conversion INR

1.59 Supplying and fixing following rating, Double pole, ( Single phase and neutral), 240 volts, Residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 Amps ( D S R ELECTRICAL 2.14.3. ) no Excess(+) Full Conversion INR

1.6 Supplying and fixing following rating, Four pole, ( Three phase and neutral), 415 volts, Residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps ( D S R ELECTRICAL 2.15.3. ) no Excess(+) Full Conversion INR

1.61 Supplying and fixing following rating, Double pole, ( Single phase and neutral), 240 volts, Residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps ( D S R ELECTRICAL 2.14.3. ) no Excess(+) Full Conversion INR

1.62 Supply, Conveyance , Installation, testing and commissioning of Wall mounting fan of 400 mm Sweep with Oscillation System and Pull Cord, Fixing to wall with wall mounting brackets supplied along with the fan and Giving Connections with Existing wire etc. complete. od28805/2023_2024 nos Excess(+) Full Conversion INR

1.63 Supply Conveyance, installation, testing and commissioning of sleek compact recess mounting LED Slim Panel Light Fitting 18 W, Square or Round, Cool or Warm,size 205 mm or nearest available , with light weight body, energy efficient drive , complete with all accessories , fixing directly on ceiling including giving connections with required length of 3 core round copper conductor flexible wire confirming to the relevant ISS or extending the original wire etc. as required od28806/2023_2024 nos Excess(+) Full Conversion INR

1.64 Supply Installation , testing , Commissioning of Sleek Compact Recess Mounting, LED Slim Panel Light Fitting Square or Round, Cool or Warm, 12 w of size 155 mm or Nearest available size, with Light Weight Body, Energy efficient Drive, with all accessories, fixing directly on ceiling including giving connections with required length of 3 core round copper conductor flexible wire confirming to relevant ISS or extending the original wire etc. as required od28807/2023_2024 nos Excess(+) Full Conversion INR

1.65 Supply Conveyance, Installation, Testing and Commissioning of Sleek Compact Recess Mounting LED Slim Panel Light Fitting 6 w , Square or Round , Cool or Warm, Size 105 mm or nearest available size, with Light weight Body , Energy Efficient Drive,complete with all accessories, fixing directly to the Ceiling including giving connection with required length of 3 core round copper conductor flexible wire confirming to relevant ISS or extending the original wire etc. as required od28808/2023_2024 nos Excess(+) Full Conversion INR

1.66 Supply, Conveyance, Installation, Testing and Commissioning of Sleek , Compact Recess Mounting LED Slim Panel Light Fitting 3W or 4W, Round or Square, Cool or Warm, Size 75 mm or nearest available , with Light weight Body, Energy efficient Drive,complete with all accessories ,fixing directly on ceiling, Giving connections with required length of 3 core copper conductor flexible wire confirming to relevant ISS or extending the original wire etc. as required od28809/2023_2024 nos Excess(+) Full Conversion INR

1.67 Supplying and drawing following sizes of CC TV CABLE in the existing surface / recessed steel/ PVC conduit as required. - 3 +1 CC TV CABLE PURE COPPER OF BRAND D LINK OR EQUIVALENT BRANDS APPROVED BY THE ENGINEER IN CHARGE. m Excess(+) Full Conversion INR

1.68 Supplying , installing , testing and commisioning CC TV System with CCTV CP PLUS 2.40 MP MIC BULLET TC24PL2C - V3-0360 / CP PLUS 2.40 MP MIC DOME TC 24 PL 2C - V3- 0360 CAMERA 6 NOS , CP PLUS 8 CHANNEL 2.4 MP DVR CP UVR -0801E1-IC , remote, channeling, playback, motion, mobile imaging, 1 unit, WITH 1 no 12 V 5 AMPS CP PLUS SMBS POWER SUPPLY , THOSHIBA 4 TB HARD DISK DRIVE , BNC / DC Cable Connecters - 18 nos, PVC CCTV COBOX 6 NOS , 1 no 22 " LED Monitor SAMSUNG ( ips Borderless ) , including installation and DVR configaration Charges , Excluding Cabling Charges 1 Unit Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information