S.R. to Boy s Hostel Buildings For Government Engineering College at Valsad (1 Nos) (Toilet - Bathroom Renovation Plumbing Work Sanitary & Outer Drainage Work and Misc. Works)

Name of work :-

S.R. to Boy's Hostel Buildings For Government Engineering College at Valsad (1 Nos) (Toilet - Bathroom

Renovation, Plumbing Work, Sanitary & Outer Drainage Work and Misc. Works )

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 971 Sqmt 48.21

serviceable materilas and disposal of unserviceable

materials with all lead and lift.

2 Demolition and disposal of unserviceable materials with all lead and lift.(i) 51 Cumt 609.26

Providing and laying water proofing treatment by conventional method

3 including cleaning the slab surface by wire brush as directed including 200 Sqmt 897.89

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

4 Dismantling santtary fittings like wash basin . W.C. pan Indian 54 Nos. 405.65

and European type, flushing tank etc. including stacking the materials with

all lead and lift.

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with 1062 Rmt. 75.08

fittings and clamps including stacking the materials with all lead and lift (

for any dia, of pipe)

6 Providing and laying Vitrified Full body tiles 8 to 10 mm thick, 24'' x 24'' in 270 Sqmt 1073.13

flooring treads of steps and landing laid on a bed of 12mm thick cement

mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

Providing and laying 24" x 24" Vitrified Full body tiles 8 to 10 mm thick, in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) andjointed with white cement slurry

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

9 Providing laying and jointing in true line and level 25mm dia. 240 Rmt. 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concelled as directed including

10 U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and 480 Rmt. 836.73

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

11 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 66 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

Providing goodand

laying thejointing

walls. in true line and level 40mm dia. U.P.V.C. Pipe

12 (SCH- 40) for cold water including fittings as approved by Engineer In 198 Rmt. 148.12

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same with adhesive

13 Providing and fixing screw down bib taps of following size. (B) Brass 26 Nos. 2508.84

chromium plated screws down Bib Tap. (i) 15mm dia. (Make Jaguar EKO

Series EKO-CHR-33037 Short Body Bib Tap as Directed by engineer

incharge and completed), SS soap (15Cm) dish, SS towel holder (450mm

Providing and fixing wash down water closet dual flushing system

14 type (Wall Hung type W C pan) with integral P and S trap including 12 Nos 10219.18

jointing the trap with soil pipe in cement mortar 1:1 (1 cement five sand)

including providing and fixing seat cover for wash down WC with

40mm dia CP brass flush cock, Brass chormium plated screws down bib

tap (Model: EKO-CHR-33037) and GI inlet connection etc .(Make Jaquar,

Rak, Cera and equvivelent.)

15 PProvision and fixing water closet squatting orissa type W.C. pan size 6 Nos 6922.54

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm dia

CP brass flush valve, Brass chormium plated screws down bib tap (EKO-

CHR-33037) and GI inlet connection etc. comp. (A) Vitreous china long

pattern white Colour.

16 Providing and fixing wash basin with single hole for pillar tap with 18 Nos 6493.29

C.I. Or M.S. brackers painted white including cutting holes and making

good the same including Brass waste, angle cock, bottle trap and wall

mounted tap (Model: Jaquar Spout Operated Bib Tap with Wall Flange

SOT-83037 ) :(ii) Flat back wash basin 500mm x 400mm size including all

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe and Stop tap (Code: ECS-WHT-253, Jaquar) etc.

complete.(A) White earthenware flat back or corner type size 430mm x

260mm x 350mm. ( Make for Wash basin Cera, Jaquar, hindware, Plantex,

Jonshons etc directed by engineer in charge and completed.)

Providing and fixing polished 18 mm thick black granite with full round

edge and double side polished of approved quality in between urinal and

fixing with cement slurry & adhesive including moulding of both exposed

edges as directed by engineering in charge etc. complete.

Providing and Fixing 0.60m wide sandwich type washbasin platform

including supplying and fixing granite stone of black or equivalent quality

18mm thick mirror polished on top and side position and vertical strip at

front with cement slurry & adhesive including moulding of both exposed

edges over 25mm thick kota stone platform fixing in top and sides and

intermediate supports fixing with cement mortar and adhesive and

finishing all material and labour with necessary fitting complete etc.

20 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 18 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

21 Painting two coats (excluding priming coat) on new wood and wood 201.6 Sqmt 88.29

based surface with enamel paint, interior to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter sand

papering and stopping.

22 Providing and Fixing WPC Door including fixture and fastening with 69.3 Sqmt 4307.65

new 304 grade fixtures like 3 Hinges, 1 Stoppers 20cm, 1 Aldrop 25cm,

Handle 10cm, 1 Tadi 20cm etc. and as directed by engineer in charge etc

comp. (LAPO/ Niki or Equivelant brand WPC Doors for Bathroom Door,

Waterproof & Termiteproof, WPC Door for Entrance,Office,

Balcony,Kitchen with Frame. 30 mm Thickness,Density-600,22 kg-Wooden

Providing 15mm thick cement plaster in single coat on Rough (Similar)side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and Applying two coats of putty & two coats of primer of

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

25 Wall painting (two coats) with plastic emulsion paint of approved brand 704 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

26 Painting one coats (excluding priming coat) on previously painted steel 840 Sqmt 55.05

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

27 Removing and scraping of old deteriorated plaster of any thickness fromm 625 Sq.mt 19.57

wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable

from site of work with all lead and lift (Outer Plaster)

28 Demolition of Brick work and stone masonry including stacking of 6 Cum 550.40

serviceable materilas and disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

29 Removing, Repairing and Refixing Old existing wooden door shutter 12 Each 1361.48

including repairing the shutter/frame usingRandha machine and replacing

old fixture and fastening with new SS 304 grade fixtures like 3 Hinges,

Stoppers 20cm, 1 Aldrop 25cm, 2 Handle 10cm, 1 Tadi 20cm etc. and as

directed by engineer in charge etc comp.

30 Removing, Repairing and Refixing existing Alluminium window frame 12 Each 464.60

with glass of all size shutter/frame, replacing all old fixtures with new

locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

window, all materials, transport cost, taxes etc.and asdirected by

engineer in charge etc complete.

31 Removing, Repairing and Refixing existing Alluminium fix ventilation 8 Each 289.87

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and asdirected by

engineer in charge etc complete.

32 Brick work using common burnt clay building bricks having crushing 6 Cum 4379.21

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(C) Fly Ash Bricks

33 20 mm Thick sand faced Gutka cement plaster on walls for all height 240 Sqmt 300.66

above ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1

cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :

sand)with 1x1cm Groves at juction of structure member etc. complete.all

34 Cutting out cracks of wall and roof terrace to V- section , 306 Rmt 65.23

cleaning out, wetting , grouting with cement and sand slurry 1:3 (1-

cement 3-sand )

Wall Painting (Two coats) with weather proof acraylic emulsion (Apex

or equivalent type) paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even shade over

and including primery coat with Alkaly resistance primer of approved

brand after thoroughly brushing surface to remove all dust and

remains of loose powdered material etc. copm.

36 Constructing brick masonry road gully chamber 1100mm x 775mm 15 Each 8767.25

including 500mm x 450mm (C.I. horizontal grating with frame and vertical

grating complete

37 Excavation for foundation upto 1.5 m depth including sorting out and 97.2 Cum 117.08

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

38 Providing and laying in trenches galvanised mild steel tubes (Medium 270 Rmt 919.80

grade) of the following nominal bore, and tube fitting (Earthwork in

trenches to be measured and paid for separately)(H) 80mm.

39 Filling available excavated earth (excluding rock) in trenches. plinth, sides 97.2 Cum 130.39

of foundations etc. in layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

Rupees Thirty Seven Lakh Five Thousand Nine hundred Ninety Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated

rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 3705990.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed

specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all

condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution

T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction works

walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of Labour

& Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 &

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement

Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage &

water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document

of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division