Supplay and installation of auditorium AV system at Ambalavayal Heritage Museum, Sulthan Bathery, Wayanad.

Amount

Supply and installation of laser 4K UHD Ready projector suitable for larger-sized screens with all necessary accessories, including projector supporting Zoom Lens and having the following minimum specifications. 1. Projection method: DLP single chip projection 2. Light Source: Laser diode 3. Light Output: 8000 lumen or higher 4. Contrast ratio : 10,000:1 with dynamic contrast 5. Video Input terminal: MiniD-Sub15-pin×1,BNCterminal×5, HDMI Terminal typeA×1, DisplayPort×1 6. PC control terminal: D-Sub9-pin×1 7. USB port: USBtypeA×1,USBtypeB×1 8. Ethernet/HD BaseT port: RJ-45×1,SupportsBASE-TX 9. Lens throw distance : 23.5 meter to 35.4 meter for 300" screen 10. Screen size: up to 300” sized screen Warranty : 3 year Standard Warranty for projector and minimum 1 year for lens. Approved Make:NEC NP-PX803UL-BK with NP20ZL lens equivalent with same or above specifications.

Supply and installation Dolby Atmos and DTS:X supported AV receiver with all necessary accessories and having following minimum specifications. 1. HDMI inputs: 8 inputs including 2 for up scaling 2. local router connectivity through Ethernet port and WiFi 3. FM and AM radio antenna 4.Pre output for Dolby Atmos and DTS:X and other conventional channel-based audio 5. Coaxial digital audio input 6. Multicast support 7. HDR support Accepted Model:-Yamaha CX-A5200 AVENTAGE or equivalent model with same or above specifications.

Supply and installation of high quality two channel audio power amplifier with all necessary accessories and having following minimum specifications. 1. Output power: 1050W x 2 in 4Ω drivers 2. Sampling frequency rate: 48kHz 3. A/D D/A Converters:24-bit linear, 128 times over sampling 4. Frequency response: 20Hz to 20kHz 5. Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 6. Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 7. USB port: for firmware update 8. Amplifier class: Class D, Balanced output circuit (BTL) 9. Inbuilt DSP processing with input and output routing options. Accepted Model:-Yamaha PX8 or equivalent with same or above specifications.

Supply and installation of high quality two channel audio power amplifier with all necessary accessories and having following minimum specifications. 1. Output power: 500W x 2 in 4Ω drivers and 300W x 2 in 8Ω drivers 2. Sampling frequency rate: 48kHz 3. A/D D/A Converters:24-bit linear, 128 times over sampling 4. Frequency response: 20Hz to 20kHz 5. Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 6. Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2 7. USB port: for firmware update 8. Amplifier class: Class D, Balanced output circuit (BTL) 9. Inbuilt DSP processing with input and output routing options. Accepted Model:-Yamaha PX3 or equivalent with same or above specifications.

Supply and installation of high quality, good built passive subwoofer with Dual 18" Low frequency driver sub woofer system with all necessary accessories and having following specfications. 1. Power Capacity:600 Watts (Noise),1200 Watts (Program),2400 Watts (Peak) 2. Frequency Range:30 Hz - 2 kHz 3. Maximum Sound Pressure Level (SPL):132dB 4. I/O connectors: 2x Phone, 2x speakON Accepted Model:-Yamaha SW218V / CW218V or eqivalent model with same or above specifications.

Supply and installation of wall/Ceiling mountable passive two way speaker system with all necessary mounting accessories having the following minimum specifications. 1. LF component: 10" cone, 2" voice coil, Ferrite Magnet 2. HF component : 1" compression driver, 1" throat, Ferritex Magnet 3. Frequency range: 50Hz - 20kHz 4. Power rating PGM : 350W 5. Connectors: 1/4" Phone x 1, speakON NL4MP x 1 6.Nominal Impedance: 8Ω Accepted Model:-Yamaha CBR10 or eqivalent model with same or above specifications.

Supply and installation of passive 2-way full-range speaker system with all necessary accessories having the following minimum specifications. 1. Frequency range: 42Hz-16kHz 2. LF components: 2x 15" cone 3. HF driver: Horn, 2" voice coil driver 4. Power rating; 1000W PGM and 2000W peak 5. Nominal impedance: 4Ω 6. I/O connectors: 2x Phone, 2x speakON Accepted Model:-Yamaha C215V or eqivalent model with same or above specifications.

Supply and installation of wall mountable passive two way speaker system with all necessary mounting accessories having the following minimum specifications. 1. LF component: 15" cone, 2" voice coil, Ferrite Magnet 2. HF component : 1.4" compression driver, 1" throat, Ferritex Magnet 3. Frequency range: 50Hz - 20kHz 4. Power rating PGM : 500W 5. Connectors: 1/4" Phone x 1, speakON NL4MP x 1 Accepted Model:-Yamaha CBR15 or eqivalent model with same or above specifications.

Supply and laying high quality 2x2.5 sqmm copper speaker cable with pvc or rubber outer covering with enough speakon connectors.

Supply and fixing the 25mm PVC medium gauge ivory Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including cutting the wall and making good the damages etc as required.

Supply and installation of 22U Rack for amplifier, AV Receiver with cooling fan, power strip, mounting tray, 2 numbers of Server Tray and hardware mounting kit.

Supply and installation of high performance media box with all necessary accessories and having the following minimum specifications 1. Processor : ARM cortex based Quad core 64bit processor 2. RAM: 2GB DDR3 Ram 3. Inbuilt memory:16GB 4. Vedio: 4k hdr video playback 5. Internal bay for 3.5" SATA hard drive up to 8TB 6. HD-Audio formats: Dolby True-HD, Dolby True-HD ATMOS, DTS:X, DTS-HD MA, 5.1/7.1 LPCM, DTS, and Dolby Digital AC3 7. Ports: HDMI, AV, Optic, Coaxial and USBHi Accepted Model:-Media Cubetek Q10 Pro or eqivalent model with same or above specifications.

Supply and installation of 1TB 3.5 inch SATA HDD suitable for above media player box Accepted Model:- Western Digital,Seagate or equivalent

Supply of high quality 3 meter XLR cable for connecting AV receiver audio out to amplifier

Supply and installation of Dual channel UHF wireless Microphone having more than 200 feet coverage distance, 50-15,000 Hz frequency response, >100 S/N ratio, LED indicators and Controls with hand held microphones. Accepted Model:-Studiomaster XR40HH or equivalent

Supply and installation of Wi-Fi 4K HDR blue ray player with all necessary accessories and having the following minimum specifications. 1. Native UHD 4K Playback via HDMI 2. Wi-Fi and Ethernet Network Connectivity 3. 3D Streaming 4. High-Resolution SACD Playback 5. Dolby Atmos & Dolby TrueHD, DTS:X 6. Near-4K Resolution Upscaling Accepted Model:-Sony UBP-X800 or eqivalent model with same or above specification

Supply and installation of 15 inch or above LCD panel with HDMI input supplied with suitable 19” rack mounting kit with all necessary accessories

Supply and installation of ISO/ISI certified MOSEFET/IGBT technology based 10 KVA Online UPS with minimum 3 year on-site warranty and having the following minimum specifications 1. Output : 220 V ± 1 % 50 Hz sine wave 2. Input : 160V to 260 V 50 Hz single phase 3. Rating : 10 KVA 4. Backup time : Minimum 1 Hrs. on full load 5. Efficiency : 90 % or Higher 6. Battery : 16000 VAH or higher Lead Acid tubular Batteries with minimum 3 years onsite warranty 7.Protection : Over load, short circuit, battery reverse polarity, input voltage below or above the specified range, over discharge or charge of battery

Adwaita Technology Solutions LLP

Mr ALFA Electronics