Construction of Chemistry Lab Platform of EMRS School at Indu,Tal.: Vyara, Dist.: Tapi.

Construction of Chemistry Lab Platform of EMRS School at Indu Tal.: Vyara, Dist.: Tapi.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Dismentaling Platform of Granite laid in mortar including 15.60 Sq.m. 49.41

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

2 Providing and fixing 1.2 meter wide sand which type 26.00 Sq.m. 6273.11

counter platform including supplying and fixing granite

stone of Z black or equivalant quality 18 mm thick mirror

polished on top and side posiition and vertical strip at

front with cement slurry & adhesive including moulding

of both exposed edges over 25 mm granite platform

fixing in top and sides and itermediates supports fixing

with cement mortar and adhesive and finishing all

material and labour and assessories etc. complete etc.

3 Providing and fixing Lab sink with C.I. or M.S. brackets, 11.00 No. 2326.66

painted white including cutting holes in walls and making

good the same but excluding fittings. (C) Vitreous China

sink.(i) 600mm x 450mm x 150mm size.

4 Providing and fixing C.P. brass waste for washbasin or 11.00 No. 120.98

sink. (A) 32mmdia. +Waste Pipe for Wash basin C.P.

5 Providing and fixing PVC SWR Nahni trap IS 14735 for 11 No. 585.37

drain 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls..

6 Providing and fixing screw down bib taps of following 21 No. 186.83

size.(A) Brass screw down bib tap polished bright. (i)

7 Providing and fixing Gun metal check or non-return 5 No. 420.63

fullway wheel valve. 25mm. dia.

8 Providing and fixing Gun metal check or non-return 5 No. 663.43

fullway wheel valve. 40mm. dia.

9 Providing laying and jointing in true line and level 15mm 40.00 Rmt. 72.65

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

Item Description of Item Quantity Unit Rate In Amount

10 Providing laying and jointing in true line and level 25mm 90.00 Rmt. 91.84

dia. U.P.V.C. Pipe (SCH-40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

11 Providing laying and jointing in true line and level 40mm 100.00 Rmt. 148.12

dia. U.P.V.C. Pipe (SCH-40) for cold water Including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

12 Providing, laying and jointing in true line and level 30.00 Rmt. 857.65

110mm diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in walls

as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

13 Providing, laying and jointing in true line and level 75 mm 120.00 Rmt. 293.91

dia. UPVC SWRType B pipe conforming to IS 13592-1992

with one end plain and other end socketed with

rubbering and fitting conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp at every

mm c/c or shall be conceled in walss as directed including

necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

Item Description of Item Quantity Unit Rate In Amount

14 Constructing brick masonry chamber for underground C.I. 2 No. 2932.93

Inspection chamber and bends with briocks having

croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not

less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement 2-

coarse sand 4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and

450mm deep for single pipe line.

15 Providing and fixing in position cowel went to pipes. (C) 2 No. 505.17

16 Providing erecting and fixing double coated PVC (ISI) 2000 Ltr. 3.95

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

Rupees Three Lacs Eight Thousand Three Hundred Thirty Seven Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Executive Engineer

Tapi ( R & B ) Division