Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹24.9 L+₹4.1 L (19.6%)Rejected-Finance 275 GOLE BUILDING ROAD 1ST B ROAD SARDARPURA JODHPUR RAJ 342003 | JODHPUR | RAJASTHAN | 342003 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹25.5 L+₹4.6 L (22.3%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹26.3 L+₹5.4 L (25.9%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹26.9 L+₹6.0 L (29.0%)Rejected-Finance 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L5 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | DIWAKAR CONSTRUCTION CO. L5 | Shri Maruti Trading Co. L6 | SK INDUSTRIES L1 | M/s B. S. Solanki Builders L3 | Narender Constrution Company L4 | JANGID BUILDERS L2 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00Chair Dining : FD-228 & 279 | |||||||||
| 1.01 | Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 550 | Each | 70 ₹38,500 | 70 ₹38,500 | 22 ₹12,100 Lowest | 30 ₹16,500 | 32 ₹17,600 | 31 ₹17,050 |
| 1.02 | Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 550 | Each | 70 ₹38,500 | 52 ₹28,600 | 13 ₹7,150 Lowest | 20 ₹11,000 | 22 ₹12,100 | 21 ₹11,550 |
| 1.03 | Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 550 | Each | 59 ₹32,450 | 44 ₹24,200 | 12 ₹6,600 Lowest | 22 ₹12,100 | 22 ₹12,100 | 20 ₹11,000 |
| 1.04 | Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 550 | Each | 59 ₹32,450 | 44 ₹24,200 | 13 ₹7,150 Lowest | 23 ₹12,650 | 25 ₹13,750 | 15 ₹8,250 |
| 1.05 | Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 800 | Each | 35 ₹28,000 | 22 ₹17,600 | 5 ₹4,000 Lowest | 30 ₹24,000 | 31 ₹24,800 | 11 ₹8,800 |
| 1.06 | Back Strip Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge. | 200 | Each | 50 ₹10,000 | 39 ₹7,800 | 18 ₹3,600 Lowest | 20 ₹4,000 | 21 ₹4,200 | 21 ₹4,200 |
| 1.07 | Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge. | 2,500 | Each | 8 ₹20,000 Lowest | 9 ₹22,500 | 12 ₹30,000 | 10 ₹25,000 | 11 ₹27,500 | 15 ₹37,500 |
| 1.08 | Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge | 2,500 | Each | 2 ₹5,000 | 2 ₹5,000 | 1 ₹2,500 Lowest | 2 ₹5,000 | 3 ₹7,500 | 5 ₹12,500 |
| 1.09 | Re-canning Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge. | 1,100 | Each | 100 ₹1,10,000 Lowest | 122 ₹1,34,200 | 251 ₹2,76,100 | 330 ₹3,63,000 | 329 ₹3,61,900 | 225 ₹2,47,500 |
Tender Value
₹29.9 L
EMD Value
₹59,732
Closing Date
7 Jan 2026, 6:00 pmClosed
Garrison Engineer, Banar
Garrison Engineer Banar, Jodhpur-342027
REPAIR TO WOODEN FURNITURE AND MISC FURNITURES AND POLISHING ETC AT A A BANAR UNDER GE BANAR
2025_MES_739728_2
8825/67/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
BANAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer Banar
₹59,732
Yes
11 Feb 2026
24 Dec 2025
14 Jan 2026
24 Dec 2025
7 Jan 2026
31 Dec 2025
Chair Dining : FD-228 & 279
Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Back Strip Taking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
Re-canning Re- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
Chair Writing : FD-202, 250 & 280
Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by E-in-C
Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
Re-canning Re- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
Arms Rest: Taking down old u/s Arms Rest and M&L for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Rear Legs : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front Legs: Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Side Rails of Seat: Taking down old u/s Side Rails of Seat and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front/ Back Rails of seat : Taking down old u/s Front Rail of Seat and M&L for New Front Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Side Rail Back: Taking down old u/s Side Rail of Back and M&L for New side rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Top/Bottom Rail of Back: Taking down old u/s Top/Bottom of Back and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front Support Rail : Taking down old u/s Front Support Rail and M&L for New Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Shoes :- M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
Re-canning Re- canning of Chair Easy in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Rest all as shown on drawing and as directed by the Engr - in - Charge.
Arms Rest: Taking down old u/s Arms Rest and M&L for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bed Hard/Bed Newar ; FD-246
Legs : M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.
MiddRest and sides. S & F New cushion of 100 mm thick 40 density for seat and back (02 Nos Cushion) and 40mm thick 40 density size as required for side of arm rest and front rail
Side Board : FD-244, 15(M) & FD-212
Top : Taking down old u/s Top and M&L for New Top made out of 18/19mm Post Forming Prelaminated Post Forming MDF Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.
Legs : Taking down old u/s Leg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
Long Rail : Taking down old u/s Long Rail and M&L for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
Short Rail : Taking down old u/s Short Rail and M&L for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
Shutter :- M&L for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .
Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
Side LT/RT Taking down old u/s Side LT/RT and M&L for New Side LT/RT made out of 18/19mm Prelaminated MDF board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.
Back :- M&L for removing old worn out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .
Knob : M&L for taking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.
Bin Soiled Linen : FD-244, 15 (M) & FD-212
Top : M&L for removing old worn out top and new top made out of 18/19 mm post forming prelaminated MDF board exterior grade . Rest all as specified in drg and as directed by Engr-in-Charge.
Bottom : M & L for removing old worn out bottom from bins, S&F new Bottom made out of second class. Rest all as specified in drg and as directed by Engr - in -Charge.
Back : M & L for removing old worn out back of the bins and new made out of 6 mm thick commercial plywood BWR Grade. Rest all as specified in drg and as directed by Engr - in -Charge.
Side LT/RT Canning :- Side Canning of Bin in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning. Rest all as shown on drawing and as directed by the Eng - in - Charge.
Side LT/RT SS Wire Mesh :- M&L for fixing of Side LT/RT with Galvanized SS woven wire mesh 0.46mm niminal dia 16 Mesh wide aperture 1.18mm conforming to IS : 1568/1970 including taking out old SS Wire Mesh. Rest all as shown on drawing and as directed by the Eng - in - Charge.
Hinge :- Taking down old u/s Hinges and M&L for New Hinges ISI Marked size 75mm complete. Rest all as specified in drg and as directed by Engr-in-Charge
Stool Dressing CB/Cushioned : FD-27, 252, 287 & 374
Leg : Taking down old u/s Leg and M&L for New leg made out of teak wood complete all as specified.
Side Rail : Taking down old u/s Side Rail and M&L for New leg made out of teak wood complete all as specified.
Stiffener : Taking down old u/s Stiffener and M&L for New leg made out of teak wood complete all as specified.
Re-Canning : Side Canning of Stool Dressing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning. Rest all as shown on drawing and as directed by the Eng - in - Charge.
Table Dressing Ladies : FD-251
Back ply of mirror :Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.
Top : Removing UNSV top and S & F new top made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.
Bottom : Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.
Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
Knob : M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.
Legs : M&L for removing unservicable Legs from the table and SF new Legs made out of 2nd class H/W. Rest all as specified in the drg and as directed by Engr in Charge.
Glass sliding shutter with alluminium channel : M&L for removing UNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width. Rest all as specified in the drg and as directed by Engr in Charge.
Tables Dressing Gents : FD-230/31
(b) Back ply of mirror : Removing UNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.
(c) Top : Removing UNSV top and new top made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.
(d) Bottom : Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated MDF board exterior grade. Rest all as specified in the drg and as directed by Engr in Charge.
(e) Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
(f) Knob : M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer. Rest all as specified in the drg and as directed by Engr in Charge.
Table Writing : FD-249, FD-275 & FD-33 (M)
Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade .All as per specfication in drg and directed by E-in-C
Legs : M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.
Long Rail : M& L for removing U/S long rail from the table including supply and fixing new long rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.
Short Rail : M& L for removing U/S short rail from the table including supply and fixing new short rail made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.
Central Stiffener : M& L for removing U/S stiffener from the table including supply and fixing new stiffener made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.
Drawer : Removing U/S old broken drawer and S & F new ,made out of teak wood well seasoned. All as shown on drawing , as specified and as directed by Engr-in-Charge.
Store Box (Back) : Removing old u/s back side board and replace with 6mm thick (BWR) commercial ply.
Store Box (Side) : Removing old u/s side and replace with 19mm thick block board teak veneer finish (One side).
Small legs : - M& L for removing U/S legs from the table including supply and fixing new legs made out of 2nd class HW complete. All as per specfication and directed by Engr in Charge.
Shutter : M& L for removing U/S shutter from the table and supply and fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mm teak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.
Shoes : M & L for removing old/worn out rubber shoes with S & F new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge
Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table Writing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
Teapoy : FD-34, FD-232 & FD-278, FD-382
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All as specfication in drg and directed by Engr in Charge
(b)Top of the Teapoy shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
(c) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Table Centre : FD-235 & FD-274
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade .All as specfication in drg and directed by Engr in Charge
(b)Top of the Table Centre shall be made of 100mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
(c) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Peg Table : FD-226 & FD-384
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All as specfication in drg and directed by Engr in Charge
(b)Top of the Peg Table shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
(c) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Stiffener : M&L for removing U/S Sstiffener S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Table dining 6 persons : FD-273 & FD-329
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All as specfication in drg and directed by Engr in Charge
(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Table Dining 8 persons : FD-273 & FD-329
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All as specfication in drg and directed by Engr in Charge
(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Table 3'x2' W/o Drawer : FD-231 & FD-284
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All as specfication in drg and directed by Engr in Charge
(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Stiffener : M&L for removing U/S Sstiffener S&F New stiffner made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Table 3'x2' Drawer : FD-231/223/283/284
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All as specfication in drg and directed by Engr in Charge
(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(d) Stiffener : M&L for removing U/S Sstiffener S&F New Stiffner made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
(g) Drawer : Removing U/S old broken drawer and S/F new made out of 6mm plywood commercial BWR grade. Rest all as per specification given in the drawing and directed by Engr in Charge.
Table Bed Side : FD-28, 210 & FD-276
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge
(b) Side LT/RT : M& L for removing U/S Side LT/RT from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mm teak wood beading all around the top complete. All as specfication in drg and directed by Engr in Charge
Chair WBB : FD-56/285
(a) Rear Legs : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Front Legs : Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(d) Seat Frame : Taking down old u/s Seat Frame and M&L for New Seat Frame made out of 6mm thick commercial Plywood ISI Marked complete. All as specified in drg and as directed by Engr-in-Charge.
(e) Bottom Stiffener : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(f) Back Strip : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(g) Shoes: M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Sofa Single Seater : FD-373
(a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa single seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(b) Side Back/Front Rail : Taking down old U/S Side back/Front Rail of sofa single seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa single seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(d) Arms : Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
(h) Cover Only for Sofa Single Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
Sofa Set 3 Seater : FD-373
(a) Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 3 seater and S& F new front/ Rear leg of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(b) Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Rail of sofa set 3 seater and S& F new Side back/Front Rail of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
(c) Battens for Seat/Back : Taking down old U/S batterns for seat/back of sofa set 3 seater and S& F new batterns for seat/back of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(d) Arms : Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Arms of 2 nd class hard wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
(g) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
(h) Cover Only for Sofa Set 3 Seater :- Opening and taking out old unserviceable Cushion Cover size 21"x22"x4" and S&F New Cushion Cover made out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge. Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
Table Dining 1200x900 : FD/MAP-II/03
(a) Top : M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All as specfication in drg and directed by Engr in Charge
(b) Long Rail : M&L for removing U/S long rail S&F New Long Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(c) Short Rail : M&L for removing U/S short rail S&F New Short Rail made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(e) Legs : M&L for removing U/S Leg S&F New Leg made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
(f) Shoes : M&L for taking out worn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all as specified and directed by Engr-in-Charge
Chair Dining Cushioned : TP
(a) Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(b) Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
(c) Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bracket : S&F new bracket triangular shape with 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
Chair Writing Cushioned : TP
Rear Legs Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front Legs Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Side Rail Taking down old u/s Side Rail and M&L for New Side Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Front or Back Rail Taking down old u/s Front or Back Rail and M&L for New Front or Back Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bottom Stiffener Taking down old u/s Bottom Stiffener and M&L for New Bottom Stiffener made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Back Strip Taking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Shoes : M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed by Engr - in - Charge
Arms Rest: Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
Bin Linen Multipurpose : FD/E6/MAP/09
Top : Taking down old u/s Top and M&L for New Top made out of 18/19mm post forming Prelaminated MDF Board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.
Legs : Taking down old u/s Leg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
Long Rail : Taking down old u/s Long Rail and M&L for New Long Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge..
Short Rail : Taking down old u/s Short Rail and M&L for New Short Rail made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
Shutter : - M&L for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior grade duly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .
Drawer : M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
Side LT/RT Taking down old u/s Side LT/RT and M&L for New Side LT/RT made out of 18/19mm Prelaminated MDF board Exterior grade complete all as specified in drg and as directed by Engr-in-Charge.
Back :- M&L for removing old worn out Back from the Side Board and new Back made out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .
Knob : M&L for taking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge. Rest all as specified or as directed by Engr in Charge.
Sofa set 5 Seater with cushion seat & back cushioned (PINKY) of Delite-Hitech ; TP
Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S & F new front/ Rear leg of teak wood as per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
Removing of existing U/S tapestry cloth of each single seat sofa and S & F new tapestry cloth for cushions, side of arms, front rail duly stiched with fine standard thread. (Rate of tapestry should not be less than 350 per RM)
Removing of existing U/S tapestry cloth of each 3 seats sofa and S & F new tapestry cloth duly stiched with fine standard thread. (Rate of tapestry should not be less than 350 per RM)
Removing of existing u/s cushion for sofa set 3 seats including Seat & Back, Arms Rest and sides. S & F New cushion of 100 mm thick 32 density for seat and back (06 cushion) and 40mm thick 40 density size as required for side of arm rest and front rail. Make - Sleepwell/Kurlon.
Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved quality french polish to glossy finish. The items are mentioned below :-
Chair Dining FD-279/203/16/262
Chair Writing FD/20/202/250/280
Chair Easy FD-229/201/17
Chair WBB FD-26/225/285
Bed Hard FD-246/245/247
Side Board FD-241/26
Bin Soiled Linen FD-244/15(m)/212
Stool Dressing FD-27/252/282
Table Dressing Ladies FD-251/32
Table Dressing Gents FD-230/231
Table Writing FD-249/275/33(m)
Teapoy FD-232/278
Table Centre FD-235/274
Table Peg FD-236/277
Table Dining 6 Persons FD-273/329
Table Dining 8 Persons FD-273/329
Table 3'x2' with out drawer FD-231/223/284
Table 3'x2' with drawers FD-231/223/283/284
Table bed side FD-236/276
Sofa Single Seater FD-281
Sofa Set 3 Seater FD-281
Table dining 1200x900 FD/MAP-II/03
Chair Dinning Cushioned (FD/E6/MAP/10)
Chair writing cushioned (TP)
Bin Linen Multipurpose (FD/E6/MAP/09)
Sofa set 4 seater with cushion seat & back cushioned (PINKY) of Delite-Hi-Tech
Sofa set 5 seater with cushion seat & back cushioned (PINKY) of Delite-Hi-Tech
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
882567.rar
Tender Documents • 0.74 MB
BOQ_835290.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .