Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.6 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹9.8 L+₹24,869.28 (2.59%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹9.9 L+₹27,766.91 (2.89%)Rejected-Finance MIL STN AGARTALA | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹9.9 L+₹33,953.18 (3.54%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹10.1 L+₹49,725.40 (5.18%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.7 L
EMD Value
₹19,300
Closing Date
23 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF SAMPLE ROOM FOR EM STORES IN AGE (I) AGARTALA AT MIL STN AGARTALA
2022_MES_541717_1
8302/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,300
Yes
6 Sept 2022
2 Aug 2022
25 Aug 2022
2 Aug 2022
23 Aug 2022
16 Aug 2022
60 days
Amount
Schedule'A' Part-I: B&R works
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil
M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken bricks.
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate
Brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point
M&L for M-25 (design mix) 20 mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.
M& L Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat
M&L RCC M-25 (design mix) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts
M &L Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions.
M&L RCC M-25 (design mix) using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat
M&L RCC M-25 (design mix) using 20 mm graded aggregate in Chajjas
M&L Formwork to chullah hoods, chajjas, troughs & similar items including edges Fair finished surfaces of concrete flat
M&L for TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item ser No. 16 but as in stirrups, spacers and binder, 8mm dia TMT bar
M&L for Sand filling under floors or in foundation including watering & consolidation
M & L 75 mm thick PCC type D-2 1:4:8 ( 40mm graded stone aggt) in sub base of floor.
M&L for 40mm thick PCC (1:2:4)type B1 20 mm graded stone aggregate fair and finish with using extra cement complete all as specified and directed.
S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM(1:6)
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to receive th tiles complete as specified
M & L for glazed ceramic colour tiles 450X300X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved by Engr-in-Charge complete all as specified and directed.
M & L 75mm thick PCC 1:3:6 type C-2 ( 40mm graded aggregate) thick as in Path & plinth protection & finishing the surface even & fair whtiout using extra cement complete all as specified and directed.
M&L chequred cement concrete tiles 300 mm x 300mm x 22 to 25 mm thick set, jointed and pointed in neat cment slurry in in floors with gray cement and no pigments, over and including 15mm thick screed bed in CM 1:4, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match complete all as specified and as directed
M& L Providing cement concrete in Type B0 1:2:4 (12.5 mm graded stone aggregate) as in copings, water throughs and the like including weathering, slightly rounded or chamfered angles andf throating complete all as spcifiecd
M & L 15mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:4 to be finished fair and even with out suing extra cement.
M&L for external rendering 20 mm thick in two layer, first layer shall be of 10 mm thick CM 1:6 and second layer of finishing coat shall be 10 mm thick in CM 1:4 mixed with WPC @3% by weight of cement on brick work or concrete surfaces of wall and finished even and smooth complete all as specified and directed. Note-WPC shall be measured and paid seperately.
Supply only integral water proofing compound
M & L two coat of Oil bound distemper over a coat of pimer on 2mm thick wall care putty including preparation of new surfaces
M & L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and preparation of new plastered surface complete all as speified.
S&F Rolled Steel Sections as in tubular trusses etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.
S&F MS steel Hollow section Square/rectangular as in purlins, rail etc etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed.
S & F Mild steel work in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embedding in concrete and screwing etc., wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 290 Gde E-165.
M&L of two coat of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth incl preparation of surfaces complete all as specified and as directed.
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including providing and fixing Gypsum Board 12 mm thick in ceiling fixed with screws as per manufacturer's instructions and Preparing new surfaces of ceiling and applying two coats of oil emulsion distempering over a coat of primer complete as specified and as directed.
S&F of Powder coated (minimum 50 micron thick) aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. (Note: Window opening size to be measured.)
M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed.
M & L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, n exc 10cm width or girth when unconnected with other painting or when painted in different tint, including preparation of new surface & applying one coat of red oxide, zinc chrome
S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified
M & L for PCC type C-1 (1:3:6) using 20mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frame incl necessary form work complete all as specified.
S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
M&L for two coats of synthetic enamel paint over one coat of pink primer on wooden surfaces of any description, not otherwise described, over 10cm width or girth incl preparation of new surfaces complete as specified and directed.
S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
S&F of 200 mm long anodised barrel tower bolt of extruded section and as directed.
Schedule'A' Part-I: E&M works
Supply & fixing bricks well burnt sub class ‘B’ bricks in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed.
M&L for point wiring with 1.5 Sqmm nominal cross sectional area, PVC insulated, FRLS unsheathed, 1100 volt grade, multistranded single core copper conductor and including PVC casing-capping minimum 25 mm wide with all fittings and accessories such as bends, Tees, Joints etc fixed to wall or ceiling and Recessed mild steel switch board of required size including bakelite sheet of 3mm thick with chromium plated screws or rectangular PVC box closed recessed having 40mm depth ISI marked ISI No 14772 Make: Presto plastic for fixing of switch etc and provision of 1.5 sqmm nominal cross sectional area, PVC insulated, FR, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly, all metal parts, such as tube light fittings, fan hook, earth terminal of all socket points etc as specified and directed .
One light/fan/bell point controlled by one, one way switch.
One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size
One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sqmm size
M & L Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed as required ,2x4.0 sq. mm +1 x 4 sq. mm earth wire in pvc cashing capping
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Material & Labour Switch piano, flush type single pole, one way 15 Amp
Material&Labour PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50mm .
Material&Labour Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body
Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal
Switch socket combination 2 in 1, 5 A flush type
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Note - Fixing/ hanging arrangements of ceiling fan such as making of hook with 10 mm dia MS bars, nuts, bolts & washers etc to be made within the quoted rate.
Supply and fixing MCB SP 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.
All as per item No 59 above but SPN 40 to 63 Amp all as complete and as directed.
S&F Single pole & neutral 8 way double door Sheet metal enclosure for DB's when MCBs to be used
S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6sq mm. 4 core.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.
M/S C.S.P. ENTERPRISE
M/S PRITAM ENTERPRISES
M/s Amrit Gope
M/S SANKAR GOPE
M/S PAUL ENTERPRISE
Pranjit kar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .