Loading
Loading…
Loading…
Tender Value
₹1.5 L
EMD Value
₹2,000
Closing Date
15 Jul 2026, 5:00 pm7d left
ACE Govindpur area
GM office, Govindpur area 3, bilbera sonardih
Installation of R.O Plant at different places under Govindpur Area
2026_BCCL_361588_1
BCCL/AR III/GM/ACE/E-NIT/26-27/ 30/1489-1514
Open Tender
Civil Works - Others
28 days
Govindpur area
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
6 Jul 2026
6 Jul 2026
17 Jul 2026
6 Jul 2026
15 Jul 2026
6 Jul 2026
6 Jul 2026 - 15 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Civil work | - | - | - | - |
| 2 | Providing and fixing Chlrinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and testing of joints complete as per directionof Engineer in Charge. Internal work - Exposed on wall
25mm nominal outer dia Pipes metre | 16 | mtr | - | - |
| 3 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming toIS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10
mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter | 12 | mtr | - | - |
| 4 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories forunplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, includingjointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion110 mm bend | 4 | each | - | - |
| 5 | Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe100 mm diameter and 1.20 m long complete as per standard design | 4 | each | - | - |
| 6 | Providing and fixing PTMT bib cock of approved quality and colour15 mm nominal bore, 86 mm long, weighing not less than 88 gms | 8 | each | - | - |
| 7 | Surface dressing of the ground including removing vegetation and in-equalities not
exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil | 36 | m2 | 1 | ₹35.96 |
| 8 | P/Lflat brick soiling | 36 | m2 | - | - |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost ofcentering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stoneaggregate 20 mm nominal size derived from natural sources). | 1.8 | m3 | 1 | ₹1.8 |
| 10 | providing manpoer for supporting installation and fitting | 16 | each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.66 MB
BOQ_374477.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid