GE CHD 70 2024 25 PROVISION OF CERTAIN REVENUE WORKS AT N AREA AND HALOMAJRA UNDER GE CHANDIGARH

Amount

ITEM NO.1 : Excavation in trenches in soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth; for foundation or for shafts, wells, cesspits, manholes, pierholes, etc. not exceeding 10 sq. m on plan and getting out complete all as specified.

ITEM NO.2 : Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick each,excavated soil in soft/loose soil, complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.3 :Removing of surplus soil/ excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.4 : Eflorescence treatment on walls using acrylic using acrylic polymer modified viscous coating with minimum specific gravity of 1.35 and minimum weighed solid percentage of 61 by scrapping/cleaning the loose particles followed by 1st coat in horizontal direction and 2nd coat in vertical direction 3-4 hrs after 1st coat. Each coat to achieve a dry film thickness of 150-170 microns and minimum coverage will be 2-2.5 sqm/kg/2coats complete,all as specified and directed by Engineer –in-Charge .Note: The chemical should not be mixed with water.

ITEM NO.5 :Earth filling including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete, all as specified and directed by Engineer-in-Charge.

ITEM NO.6 :Plain cement concrete (1:4:8) type D-2,using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

ITEM NO.7 :Broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete, all as specified.

ITEM NO.8 : Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in foundations including rafts,footings,foundation beabs,plinth beams,bases for columns,basement slabs,under reamed piles and mass concrete and the like complete all as specified and directed by Engineer-in-Charge.

ITEM NO.9 : Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

ITEM NO.10 : Reinforced Cement Concrete Design Mix M-25 using 20mm graded mechanically crushed stone aggregate as in columns,pillars,piers and struts and the like complete all as specified and directed by Engineer-in-Charge.

ITEM NO.11 Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs ,surface channels/drains, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating, as directed rounded or chamfered on edges with and including using necessary use and waste of formwork for fair finished surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.11 Use & waste of formwork to sides of concrete foundation,footings,bases of columns,raft and raft beams,sides and soffits of foundation and plinth beams and similar works,vertical or to batter surfaces of concrete etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.13 : Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings , slab over manholes similar work; not exceeding 200mm thick (Horizontal or sloping) (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.14 ::Use & waste of formwork to sides of pillars,posts,struts,piers,columns and stanchios etc. (rough finished flat surfaces of concrete), complete all as specified and directed by Engineer-in-Charge.

ITEM NO.15 : TMT steel bars 10mm dia and over, of grade Fe-500D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

ITEM NO.16 : TMT steel bars 5mm dia and over upto and including 10mm dia , of grade Fe-500D cut to length, bent to shape required, including cranking, bending stirrups spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in strirrups , spacers and binders complete all as specified and directed by Engineer-in-Charge.

ITEM NO.17 : Brick work with sub class 'B' bricks, class designation 100, old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

ITEM NO.18 : Brick work using burnt clay bricks of sub class 'B' ,class designation 100,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 19 : Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth surface without using extra cement, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.20 : Rendering 15 mm thick in cement mortar 1:4, on brick or concrete surfaces in two layers mixed with water proofing compound on top layer, trowelled to even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. NOTE: Water proofing compound shall be measured and paid separately.

ITEM NO 21 Supply only liquid water proofing comound ISI Marked complete all as specified and directed.

ITEM NO.22 : Rendering 5 mm thick in cement mortar 1:3 as in ceiling/soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.23 : Preparation of new external surfaces of walls, brooming down, applying one coat of white cement based wall care putty after applying emery paper or sand paper etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.24 : Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitering complete all as specified and directed by Engineer-in-Charge.

ITEM NO.25 :Preparation of plastered or unplastered new surfaces of ceilings and applying three coats of white wash including preparation of surface complete all as specified and directed by Engineer-in-Charge.

ITEM NO.26 : Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge. (Note:- For Measurment purpose only flat surface shall be measured)

ITEM NO.27 : Preparation of new external surfaces of walls brooming down, applying one coat of white cement based wall care putty after applying emery paper or sand paper two coats of weather proof exterior emulsion paint over a coat of primer as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.28 : Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and haunching against the sides of pipes in for 150 mm bore pipes with concrete after the pipes are laid & tested, complete all as specified.

ITEM NO.29 : 75 mm thick, cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, complete all as specified.Plinth protection shall be laid in 1:20 slope and joint filling sealed with bituminous sealing compound grade "A" .

ITEM NO.30 : 75 mm thick Cement concrete (1:3:6) type C-2,using 40 mm graded mechanically crushed stone aggregate as in sub base complete all as specified and directed by Engineer-in-Charge.

ITEM NO.31 : 25 mm thick Cement concrete (1:2:4) type B-0,using 12.5 mm graded mechanically crushed stone aggregate as profile corrective course in flooring with rough finish complete all as specified and directed by Engineer-in-Charge.

ITEM NO.33 : First quality Non - skid coloured Ceramic tiles 8 mm thick (square/ rectangular) area of each tile not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement mortar over and inculding 15 mm thick screed in cement mortar (1:6) and pointed in white or coloured cement to match the tiles complete all as specified and directed by Engineer-in-Charge.

ITEM NO.34 : Glazed ceramic coloured tiles 450 x 300 x 7mm thick on vertical surface such as skirting , dado etc. over and including 10 mm thick rendering in CM 1:4 thick set and jointed in neat cement mortar and pointed in white or colour cement to match tiles complete all as specified and directed by Engineer-in-Charge.

ITEM NO.35 : Granite jet black shade, 18-20 mm thick, (table rubbed and polished) in single piece (in one direction) machine cut, machine polished, bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:3) screed, as in cooking platform, shelves, RCC counters, window cills & similar situations, complete including moulding,rounding,chamfered all as specified and directed by Engineer-in-Charge.

ITEM NO.36 : 60 mm thick machine pressed precast concrete ( M-35 grade) interlocking paver block manufactured in an automatic plant working on vibration and simultaneous hydraulic compression from top, with grey cement and pigment(Yellow & red) any shape and size confirming to IS 15658-2006 laid over and including 50 mm thick cushion of coarse sand & filling the joints after laying complete all as specified and as directed.

ITEM NO.37 : Powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, sliding doors/ window with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge.

ITEM NO.38 : Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed by Engineer In Charge.

ITEM NO.39 : Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100mm long (2 no.) suitable handle (1 no.) etc including the cost of EPDM rubber /neoprene gasket required complete all as specified and directed by Engineer In Charge.

ITEM NO.40 : Factory made box type steel windows with pressed steel frame min 1.25 thick complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. with glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge. Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4 (ii)Mode of measurement Unit will be for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery complete as per TD. (iii) The PCC back filling in chowkhat of window, Grills,Sheet glass and wire gauge will be measured and paid separately against respective items.

ITEM NO.41 : Factory made box type steel windows with pressed steel frame min 1.25 thick complete including mild steel acessories like lugs, door stopper, holdfasts, pintol hinges, handles( minimum One for each shutter), and ISI marked tower bolt 150mm size (minimum 2 for each shutter) etc. without glazing bars dovetailed or welded with one shop coat of zinc chromate primer, complete all as shown on drawing No. TD-276(R), Sheet No 1/4 to 2/4, 3/4, 4R/4 and as specified and directed by Engineer-in-Charge. Note: (i) Fabrication as per TD-276 (R) SH 1/4 to 2/4, 3/4, 4 (R) /4 (ii)Mode of measurement Unit will be for the complete window except Glass/ Gauge but incl fittings, ISI marked iron mongery complete as per TD. (iii) The PCC back filling in chowkhat of window, Grills,Sheet glass and wire gauge will be measured and paid separately against respective items.

ITEM NO. 42 : Steel ventilator with top hung or fixed half glass and half wire mesh portion shutter including projecting type hinges, steel peg stay, complete all as specified and directed by Engineer-in-Charge.Note:Sheet glass and wire gauge will be measured and paid separately against respective items

ITEM NO.43 : Factory made Pressed steel frames, confirming to IS, having profile 125 x 60 mm , 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, 100 mm size hinges, lock strike plate, etc., with one shop coat of zinc chromate primer and fixing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.44 : 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and styles of 2nd class Hardwood and panel of 9 mm B.W.P. commercial ply The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO. 45 : Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification supply & fixing in the frame at site as per specification & drawing.

ITEM NO.46 : 35 mm thick factory made glazed & Skeleton shutters of 2nd class Hardwood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size ofstiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.47 : Solid PVC door frames of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube, and edges will be painted to match with printed sheet, supply & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge.

ITEM NO.48 : Mild Steel Framed work such as grills,gratings, bands,straps,rungs,handles,hold fasts,manhol cover etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as as specified and directed by Engineer-in-Charge.

ITEM NO.49 : Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

ITEM NO.50 : Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.51 : Figured glass, pinhead type 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips using Silicon for fixing of glass in addition to glazing putty, in squares not exceeding 0.5 Sq. mtr in each pane, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.52 : 200 mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

ITEM NO.53 : Aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed by Engineer-in-Charge.

ITEM NO.54 : Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing with bolts extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.55 : 150 mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed by Engineer-in-Charge.

ITEM NO.56 :Preparation of new or previously untreated wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

ITEM NO.57 : Preparation of newly primed surfaces and applying two of synthetic enamel paint over steel and iron surfaces of any descrption, not otherwise described, over 10 cm in width or girth, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.58 : Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg of Aluminium die cast body complete all as specified and directed by Engineer-in-Charge.

ITEM NO.59 : Stainless steel, plain, black sheet 1.50 mm thick in wall cut to size of 30 cm x 15 cm, holes punched; including round headed screws,as required including writing letters or figures (Block,Roman,Italic or Indian)height of letter not more than 14 cm with reflective synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

ITEM NO 60 Stainless steel butt hinges 100 mm long heavy weight complete all as specified and directed by Engineer-in-Charge.

ITEM NO.61 : Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed Conduit(TV/Tele Socket) etc., and making good, cutting not exc 10cm girth and complete all as specified and directed by Engineer-in-Charge.

ITEM NO.62 : Steel water tubing, galvanised, medium grade, ISI marked, 20 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

ITEM NO.63 : Steel water tubing, galvanised, medium grade, ISI marked, 15 mm bore with and including all fittings , cutting, threading and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

ITEM NO.64 : Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, ISI marked, CPVC pipe outer diameter 20 mm bore with and including all fittings , cutting, threading and fixed to walls/ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge

ITEM NO.65 : Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, ISI marked, CPVC pipe outer diameter 16 mm bore with and including all fittings , cutting, threading and fixed to walls/ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge

ITEM NO 66 : CPVC SDR- 11 brass elbow fittings, ISI marked for CPVC pipe outer diameter 16 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 67 : CPVC SDR- 11 brass elbow fittings, ISI marked for CPVC pipe outer diameter 20 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 68 : CPVC SDR- 11 brass TEE fittings, ISI marked for CPVC pipe outer diameter 16 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 69 : CPVC SDR- 11 brass UNION fittings, ISI marked for CPVC pipe outer diameter 20 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 70 : CPVC SDR- 11 brass UNION fittings, ISI marked for CPVC pipe outer diameter 16 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 71 : CPVC SDR- 11 Tank Adaptor nipple fittings, ISI marked for CPVC pipe outer diameter 15 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 72 : CPVC SDR- 11 Tank Adaptor nipple fittings, ISI marked for CPVC pipe outer diameter 20 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 73 : CPVC SDR- 11 Ball valve fittings, ISI marked for CPVC pipe outer diameter 15 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 74 : CPVC SDR- 11 Ball valve fittings ISI marked for CPVC pipe outer diameter 20 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 75 : CPVC SDR- 11 Female Brass Threaded Adaptor (FTA/ FBTA) fittings, ISI marked for CPVC pipe outer diameter 15 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO 76 : CPVC SDR- 11 Female Brass Threaded Adaptor (FTA/ FBTA) fittings, ISI marked for CPVC pipe outer diameter 20 mm bore complete all as specified and directed by Engineer-in-Charge.

ITEM NO.77 : Vitreous china wash down water closet single piece of size 365 x655 x765 mm including flushing cistern and connection pipe,P or S trap (closed pattern including all necessary accessories like rag bolts,kit/gel gaskets,PVC seat cover,jet and flush pipe etc complete all as specified and directed by Engineer-in-Charge.

ITEM NO.78 : Vitreous china wash hand basin white flat back of size 550x440mm with Pedestal,CI brackets , chromium plated waste coupling, waste pipe etc., (incl all waste fittings) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.79 : 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union complete all as specified and directed by Engineer-in-Charge.

ITEM NO.80 : Pillars taps fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot'or cold with cast copper alloy with capston head long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.81 : Brass chromum plated mixer for mixing hot and cold water fancy type with long screwed shanks and flynuts screwed down for 15mm dia iron pipe complete all as specified and directed by Engineer-in-Charge.

ITEM NO.82 : 15mm bore angle cock/stop valves fancy type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and directed by Engineer-in-Charge.

ITEM NO.83 : Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type) complete all as specified and directed by Engineer-in-Charge.

ITEM NO.84 : Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes 20 mm bore and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.85 : Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes 15 mm bore and fixed complete all as specified and directed by Engineer-in-Charge.

ITEM NO.86 : Fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint in including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

ITEM NO.87 : PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.

ITEM NO.89 : Sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge.

ITEM NO.90 : 25mm dia stainless steel fancy type drapery rod of wall thickness 0.9 mm including taking out of old pelmet/bracket, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.91 : Stainless steel bracket and stainless steel fancy type fennel complete all as specified and directed by Engineer-in-Charge. Note: The quoted rate includes one pair comprising of two brackets and two fancy type fennels.

ITEM NO.92 : Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 200 mm - 210 gms ) including 20mm/15mm tank nipple complete Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.

ITEM NO.93 : Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE triple layered ,white colour cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight 200 mm - 210 gms ) including 20mm/15mm tank nipple complete Note : (i) Inlet, outlet & wash out pipe will be measured paid for separately. (ii) The quoted rate is inclusive of minimum one union each on inlet and outlet of water tank as per size of pipe shall be provided.

ITEM NO. 94 :PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified and directed by Engineer in Charge.

ITEM NO 95 : 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

ITEM NO.96 : 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge.

ITEM NO.97 : PVC(SWR) bends (any radius), for 75 mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.98 : PVC(SWR) bends (any radius), for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.99 : PVC (SWR) junction single,(Single T) equal or unequal, for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge.

ITEM NO.100 : Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge'.

ITEM NO.101: Waste pipe 32 mm dia 800 mm long flexible complete all as specified and directed by Engineer-in-Charge.

ITEM NO.102 : Brass chromium plated, tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

ITEM NO.103 : Stainless steel grating doom openable 100mm sqmm size (Minimum Weight 25 grams) with/without hole including fixing with white cement complete all as specified and directed by Engineer-in-Charge.

ITEM NO.104 : Construction of Septic tank for 25 Users with excavation, foundation PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm thick MS plate embeded all around fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc all as per Drg no STD-1320 (C) sheet 1/3 to 3/3 complete all directed and as shown in drawings.

ITEM NO.105 : Construction of Soakage wells of size 2.4 mtr dia and 4.5 mtr deep with excavation, foundation in PCC 1:3:6, walls in honey combed brick work in CM 1:4with top ring of M-25 RCC including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in RCC M25, SFRC cover, interconnecting pipes of RCC/DWC, filled with brick bats all as per Drg no STD-1173 (C) sheet 1R/2 to 2R/2 complete all as directed and as shown in drawings.

ITEM NO 105A : Reinforced concrete pipes ,150 mm bore, class NP2, laid and jointed complete with collars laid in trenches at any depth including jointing and testing complete all as specified and directed.

ITEM NO 105B : Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

ITEM NO.105D : Supplying and fixing in repairs Vitreous China squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete all as specified and directed by Engineer-in-Charge. Note : The quoted rate shall include provision of "P" Cast Iron trap.

ITEM NO.105E : Supplying and fixing in repairs Vitreous China Urinal, Half stall type size of 340 x 355 x 535 mm,white including flushing spray, flush pipe and 60 cm waste pipe and 32 mm dia CP coupling complete all as specified and directed by Engineer-in-Charge.

ITEM NO.105F : 10 ltr capacity PVC valveless, syphonic action dual flush type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe complete all as specified and directed by Engineer-in-Charge.

INTERNAL ELECTRIC SUPPLY WORKS

ITEM NO.106 : Point wiring using approved colour coding as per IS ,with stranded copper conductor 1.5 sqmm (nominal area ) single core , flame retardant low smoke and low halogen FRLSH PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked TEC and FIA approved in and including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunken/flush boxes of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge. Note :- 1. Cutting/chasing of wall etc. deemed to be included in the quoted rate of this item. 2. Modular metel flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 3. Only switch socket and fan regulators to be measured and paid separately

ITEM NO.106 (a) One light point controlled by one switch or one (Ceiling/ Wall/ Exhaust) fan point controlled by one switch and regulator

ITEM NO.106 (b) One 3 pin 5 Amps socket outlet on independent board

ITEM NO.106 (c ) One 3 pin 5 Amps socket outlet on same board with other switches

ITEM NO.107 : Point wiring using approved colour coding as per IS ,with stranded copper conductor 2.5 sqmm (nominal area ) single core , FRLSH flame retardant low smoke and low halogen PVC insulated unsheathed , 1100 V grade conforming to IS 694 ,marked TEC and FIA approved in and including PVC conduit medium grade ISI marked 20mm dia with all fittings and accessories, concealed type/ surface type (surface type only on ceiling), PVC junction boxes, modular metal sunkun/ flush boxs of any modules from 2 to 18 Modules with Inner and outer modular cover plates, including FRLSH flame retardant low smoke and low halogen rigid PVC insulated unsheathed stranded copper conductor 2.5 Sqmm (nominal area )single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed by Engr-in-charge. Note :- 1. Cutting/chasing of wall etc. deemed to be included in the quoted rate of this item. 2. Modular metel flush/sunken Box along with modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 3. Only switch, socket and fan regulators to be measured and paid separately

ITEM NO.108 : Modular snap Switch one way 6 Amps one module complete all as specified and directed.

ITEM NO.109 : : Modular snap Switch one way 16 Amps one module complete all as specified and directed.

ITEM NO.110 : Modular Socket 6 Amps 5 Pin 2 Module complete all as specified and directed.

ITEM NO.111 : Modular Socket 6/16Amps 5 Pin 2 Module complete all as specified and directed.

ITEM NO.112 : Modular fan Regulator step electronic type 2 module complete all as specified and directed.

ITEM NO.113 : Ceiling rose surface backlite 65 x 20mm size three terminalcomplete all as specified and directed.

ITEM NO.114 : Lamp holder, PVC/ Polycarbonate type with back plate complete all as specified & directed.

ITEM NO.115 : LED lights fitting 1x 20 Watt, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including 20 watt LED tube rod complete all as specified and directed.

ITEM NO.116 : 10W Bulk head LED luminaries Die cast aluminium alloy body ,heat resistent prismatic glass cover ,with specially designed gasket incl all accessories & fixtures, internally prewired and connecting by provding copper flexible wire 23/.0076 mm twin core upto fitting, complete in all respects complete all as specified and directed by Engineer-in-Charge.

ITEM NO.117 : Surface mounted wall mirror LED light Compact & sturdy 10 watt LED decorative fixture with anti glare polycarbonate diffuser, multi purpose lighting solution & applications .all accessories & fixtures, internally prewired and connecting by providing copper flexible wire 23/.0076 mm twin core upto fitting, complete all as specified and directed.

ITEM NO.118 : Exhaust fan 300 mm sweep metal body, heavy duty, Single phase AC 230/240V, with energy efficient motor, pre lubricated double ball bearing, speed 900 rpm complete with louvers for wall mounting including grouting,making hole in the wall (Square/Round) as feasible grouting and holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan incl cutting of hole of required size for fixing of the exhaust fan complete all as specified and directed

ITEM NO.119 : Distribution Board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, 8 way SPN, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as specified and directed.

ITEM NO.120 :MCB SPN 32 Amp,240 volts,50Hz, 10KA, 'B' series ISI marked as incoming and outgoing controlling circuit all as specified and directed.

ITEM NO.121 : MCB SP 6- 32 Amps, 220 volts , 50 Hzs, 10 KA , "B" series, ISI marked all as specified and directed.

ITEM NO.122 : MCCB 63 A, 415V , 4 pole with and adjustable over load short circuit protection, breaking capacity 16 KA all as specified and directed.

ITEM NO.123 : Ceiling fan AC single phase 240 Volt 50 Hz of size 1200 mm sweep complete in white colour having service value more than or equal to 6, with BLDC motor 5 star BEE rating suitable to operate with existing fan regulator, canopy cover and hanging rod with all accessories incl nuts,bolts,U clamps, 2 core PVC flexible cable 01 sqmm for making electrical connections etc, complete all as specified and directed Note :- MES No in four digits by using radium tape work over ceiling fan of specified size and colour and rate for he same including in the item rate quoted.

ITEM NO.124 :Supply,erection,testing and commissioning of 15 mtr High galvanized Mast light with and including 9 lantern 210 watt each (Flood Light) symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly,aviation obstruction light, lightning arrester spike including RCC foundation as per manufacturers instructions and height. complete all as specified and directed.

ITEM NO.125 :Supply and installation of Desert cooler electric driven (single phase) with outer body made of PGI (Plain Galvanised Iron) sheet not less than 1.20 mm thickness for fixed part,thickness of PGI (Plain Galvanised Iron) sheet for shutter not less than 0.80 mm thickness,front grill made of PGI (Plain Galvanised Iron) sheet with minimum weight 2.80 kgs,overall outer size not less than 66 cm X 66 cm X 99 cm (Height) ,copper wounded fan motor having nominal air flow capacity of 4000 cum per hour ,capacity of water storage tank not less than 80 ltr and submersible pump for required flow of water complete all as specified and directed.

ITEM NO.126 :Framed work as in cooler stands with brackets of angles or tees with web and flanges cut to shape,gusset plates,rails,braces,holdfats etc including necessary grouting on walls and necessary PCC work conforming to Fe.290.Gde-E-165 complete duly painted with two coats of synthetic enamel paint over a coat of primer all as specified and directed as per Drg (TD no 279).

ITEM NO 127 :Clean dry sand laid in trenches/ducts for bedding and cushioning to cable, 8cm in depth before laying the cable and 15 cm in depth after laying the cable including spreading, levelling and consolidation complete all as specified and directed. Note : Consolidated/punned sand shall be measured for payment purpose.

ITEM NO.128 :Supplying and laying reinforced precast concrete cable cover,class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection laid flat length perpenducualr to the axis of cable complete all as specified and direted by Engineer-in-Charge.

ITEM NO.130 : Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire, 4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009) complete all as shown on drawings and as specified and directed by Engineer-in-Charge. Note : The unit rate includes for protecton pipe 15mm and GI earth strip 4mm from top of earth plate upto 7.50 metre above ground level.

ITEM NO.131 : Earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Strip of size 25 x 4 mm by means of bolts,nuts and check nuts and washers of galvanised steel to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including chamber made up of PCC 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover, 20mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed. Note :- GI Strip more than 7.5 mtr will be measured and paid separately

ITEM NO.132 : XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) cross sectional area 25 sq. mm, 2 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.

ITEM NO.133 : Galvanised iron tubes, `light grade', 50 mm bore, with all fittings; laid in trenches/ across roads / on pole for cable protection complete all as specified and directed. Note: Excavation, earth work etc. shall be measured and paid separately.

ITEM NO.134 : XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) cross sectional area 25 sq. mm, 3.5 core,stranded aluminium conductor including cable glands, cable lugs etc , to suit the cable size, 1100 volt grade, ISI marked, laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified.

ITEM NO.135 : Galvanised iron tubes, `light grade', 40 mm bore, with all fittings; laid in trenches/ across roads / on pole for cable protection complete all as specified and directed. Note: Excavation, earth work etc. shall be measured and paid separately.

Total of Schedule 'A' Rs.

M/s Super Trading Corporation (BID ID -3213032)

deep construction company (BID ID -3205744)