PROVN OF ROAD FURNITURE AND KERB STONE EDGING TO EXISTING ROAD, SPLIT AC AGAINST BER AT ICGS LEKAWADA AND ADDN/ ALTN TO BLDGS AT SEC 09 UNDER GE (AF) CHILODA

Amount

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads/ oil putty in square n. exc. 0.5 Sqm in each pane complete all as specified and as directed.

All as per Item No. 03 but if sheet glass is ground or obscured or frosted, on one side complete all as specified and as directed.

Taking up or down steel/ UPVC water tubing and connections, 15 mm bore complete all as specified and as directed.

Taking up or down steel/ UPVC water tubing and connections, 20 mm bore complete all as specified and as directed.

Taking up or down steel/ UPVC water tubing and connections, 25-32 mm bore complete all as specified and as directed.

S&F in repairs 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/ Sqcm fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.

S&F in repairs 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/Sqcm fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.

S&F in repairs 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., complete all as specified and as directed.

Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and as directed.

S&F in repairs fancy type Stop valves/ angle cock, cast copper alloy, screwed down, high pressure, with capstan handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs fancy type Bib taps, cast copper alloy with capstan handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 32 mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms) complete all as specified and as directed.

S&F in repairs 40 mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and as directed.

S&F in repairs grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and as directed.

All as per Item No.17 but with waste hole of PTMT. (Minimum weight 100gms)

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs stack clamps for 75 mm dia pipes, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ trenches etc. complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and as directed.

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC (1:2:4) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for coloured vitrified tiles (Light shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality complete all as specified and as directed.

M&L for coloured vitrified tiles (Light shade) 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm and not exceeding 0.42 sqm over and including 15 mm thick screed bed or bedding layer in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality complete all as specified and as directed.

All as per Item No. 29 & 30 above, but on vertical surfaces/ skirting over and including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20 mm thick granite slab/ tiles (of any type and colour) machine cut type, laid in floor, platforms and pillars steps trade & risers etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding/ rounding on edges if required and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from frames) size exceeding 1.5 Sqm but not exceeding 4.00 sqm each complete all as specified and as directed.

Taking down of shutters of any description exc 1 sqm but n. exc. 2 sqm each complete all as specified and as directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

S&F butt hinges 100 mm long, Heavy weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles150 mm long, fabricated type, anodised complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F for 2nd class hardwood plain, solid, straight chowkats of CBs and shelves frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for medium density fibre board interior grade 18-20 mm thick solid construction type, fixed in repairs in CBs/ shelves doors/ shutters on timber frame work with screws/ nails complete all as specified and as directed.

M&L for 1.5 mm thick decorative laminate type -1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F parliament hinges cast brass, bright polished and fixed (width of recess between flanges when open 100mm complete all as specified and as directed.

S&F in repairs vertical vanishing blind 75 mm wide in plain coloured strips type etc. with all its accessories fixed to wall with screws complete all as specified and as directed.

S&F in repairs vertical vanishing blind printed/ coloured roller type etc. with all its accessories fixed to wall with screws complete all as specified and as directed.

S&F in repairs PVC wall panelling plastic section for wall panelling of size 250 mm x 6 mm fixed to wall complete all as specified and as directed.

S&F 5mm thick PVC sheet fillets of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting/ taking out holdfasts/ pipes etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required (depth of embedded portion of holdfasts/ pipes/ lugs exc half brick but n. exc. one brick and measured from the face of walls) complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including pillar etc. complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down plastering in cement mortar on brick or stone wall/ ceilings etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 20mm thick in two layers on fair faces of brick work, chajja, facia, slabs etc in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick rendering on ceiling surfaces in CM 1:3 cement complete all as specified and as directed.

M&L for applying two coats of OBD on newly plastered wall surfaces over a coat of primer over a coats of wall care putty including preparing the new wall surfaces cement complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of ceiling and and applying two coat of oil emulsion distemper (OBD) over a coat of wall care putty including preparation of new surfaces cement complete all as specified and as directed.

M&L for preparation of new surfaces of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of distemper oil emulsion (OBD) on ceiling surfaces complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coat of oil emulsion distemper (OBD) cement complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of exterior emulsion paint complete all as specified and as directed.

S&F MS flat iron as in hold fasts and similar articles confirming to Fe- 310-0 cement complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded aggregates) for bed block etc including necessary form work cement complete all as specified and as directed.

S&F 25mm dia Curtain /Drapery rod, anodised aluminium alloy with ornamental brackets 02 Nos for each doors/windows etc. complete all as specified and as directed.

S&F bright finished coloured aluminium anodised alloy ornamental finish type brackets/ knobs for 20/25 mm dia curtains/ drapery rod complete all as specified and as directed.

S&F in repairs for 32 mm low density polythelyne (flexible) pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified and as directed.

M&L for 2 coats of synthetic enamel paint over a coat of primer including preparation of new wooden surface of any description over 10 cm width and girth complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15cm thick, including removing rubbish off the premises complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C1 (using 20 mm graded aggregates) as in plinth protection/ Paths etc complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base etc. complete all as specified and as directed.

M&L for rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes in floors, path/ hard standing etc with grey cement and pigment (Coloured Tiles) complete all as specified and as directed.

M&L for providing cement concrete rounded or chamfered on edges of paver blocks/ chequered tiles or sides of path/ hardstanding, roof kerbing and mud stops etc. type B1, (1:3:6) (using 20mm graded crushed stone aggregate) complete all as specified and as directed.

S&F in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

S&F in repair vitrious china wash down water closet pan (one piece type) of size 660x360x760mm (Padestal pattern type) white including connection to outgoing pipes and to flushing pipe including seat cover and twin flush fittings complete all as specified and as directed.

S&F in repairs, vitreous china wash basin white table top/ counter type of size 560x400mm with brackets including cutting for and pinning in ends of brackets or erecting stand including waste coupling complete all as specified and as directed.

S&F in repairs CP Pillar cock 15 mm with swan neck spout (left/ right) and aerator with all fittings complete all as specified and as directed.

S&F in repairs CP sink mixture 15 mm (wall mounted) with 190 mm (7.5") long swivel spout, connecting legs and wall flanges including all fittings complete all as specified and as directed.

S&F in repairs 15 mm CP Bib cock 2 way with wall flange and single knobs complete with all fittings complete all as specified and as directed.

S&F in repairs CP Angle cock 2 way, 15 mm with wall flange complete with all fittings complete all as specified and as directed.

S&F in repairs 15 mm CP Central Hole basin mixture with 450 mm braided connection pipe (without pop-up) including all fittings complete all as specified and as directed.

S&F in repairs CP Overhead rain shower ABS type Round 200mm dia complete with all fittings complete all as specified and as directed.

S&F in repairs CP Telephonic hand shower with/ without arms 70mm dia with wall hook and 1.5 mtr hose pipe complete all as specified and as directed.

S&F in repairs CP Health Faucet ABS body (Push type) with wall hook and 1.0 mtr SS Braded rubber hose pipe complete all as specified and as directed.

S&F in repairs CP Toilet paper holder with flap guard complete all as specified and as directed.

S&F in repairs CP Tumbler with holder complete all as specified and as directed.

S&F in repairs CP Towel rack with hooks 600mm long complete all as specified and as directed.

S&F in repairs CP Towel ring complete all as specified and as directed.

S&F in repairs corner glass shelf 300x300 mm with 'D'/ F type brackets complete all as specified and as directed.

S&F in repairs CP soap dish complete all as specified and as directed.

S&F aluminium alloy door cills having rubber strips in bottom, fit to door size complete all as specified and as directed.

Demolition of cement concrete of any description as in roof padding, coping, chajja etc. water tank bases on roof etc.unreinforced (other than ground floor) complete all as specified and as directed. Note:- Debris/ demolished material to be removed out of MD land or 500 m away from the work place in low lying area.

M&L for 25 mm average thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregates) as in roof levelling course complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:3) on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound to be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for treating roof and projections for water proofing treatments by using five layer roof treatments as per manufacturers instruction after preparing the surfaces by cleaning, washing and removing all loose dirts/ dusts etc and grinding/ filling the cracks by cutting "V" type grooves on horizontal or vertical with crackfiller and cement by professional applicators of ASIAN/ FOSROC/ Dr Fixit/ STP or equvilent manufacturers complete all as specified and as directed.

M&L for treating wall and parapets, down facia and chajjas etc, for water proofing treatments by using five layer roof treatments as per manufacturers instruction after preparing the surfaces by cleaning, washing and removing all loose dirts/ dusts etc and grinding/ filling the cracks by cutting "V" type grooves on horizontal or vertical with crackfiller and cement by professional applicators of ASIAN/ FOSROC/ Dr. Fixit/ STP or equvilent manufacturers complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber/ pulp insulatin etc) or insulation board/ slabs/ blankets of any thickness including snap grids complete all as specified and all as directed.

S&F GI frame work of grid size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.90 mm thick having two equal flanges of 15 mm each and web of 45 mm seuspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

M&L 12 mm thick seamless calcium silicate ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the hoint of face board with specially formulated jointing compound and 48 mm wide fibre taps to provide seamless finish complete all as specified and as directed. Note:- Frame work for ceiling shall be measured and paid separately.

S&F in repairs 12 mm thick perforated particle boards/ tiles fixed in ceiling for insulation/ accoustic purposes with water proof topping of size 600x600mm, fixed to snap grid or aluminium frame work complete all as specified and as directed.

S&F 605x605mm size anodised aluminium snap grid frame work for false ceiling including hangers of 3 mm dia wire complete all as specified and as directed.

Dismantling of plain or corrugated steel/ FRP sheeting, any gauge, thickness etc as in roof covering/ wall cladding etc. complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.

S&F 2mm thick fibre glass reinforced translucent corrugated with two corrugations side lap fixed with coach screw and washer in roof and/ plain sheeting in wall cladding etc complete all as specified and as directed.

Excavating in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation etc. n. exc. 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

M&L for providing PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in kerb stones/ apex stones, enchorage blocks etc. fixed in cement mortar (1:2) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and as directed.

Removing excavated material at a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

S&F Plastic solar studs (Cat eyes) two way reflective with plastic body of model No- DA-52 (double shanks) complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

S&F solar studs two way reflective with aluminium alloy body of model No. DA-110 complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

S&F Delinators of ABS round body with 02 nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 mm duly powder coated anti rust and anti theft steel net of model No. DA-952 GP complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

S&F convex Mirror (with pole of adjustable height) of 800mm dia with ABS body and fixed in PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundations of post/ pole complete all as specified and as directed.

S&F speed breakers/ bumps in black & yellow colour of PE and 50 mm thick of model No. DA-1005 fixing with nails/ screws etc. complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

S&F reflectors of size 145 mm dia used in road sides of model No. DA-956 complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

Supply and applying of hot applied thermoplastic road marking paint with asian paints APCOMARK retro reflective thermoplastic road marking materials conforming to MORT & H - 803.4 of 100mm wide strips complete all as specified and as directed. Make:- Dark Eyes or equivalent make as approved by GE.

S&F sign boards made out of 4 mm ACP sheet boned with retro reflective sheeting of class B ORALITE* 5910 High intensity prismatic grade (Type- IV high intensity micre-prismatic grade sheeting HIP) having pressure sensitive retroreflective specified back ground, border and back side retroreflective symbols, letters, numerals, arrows as per IRC- 67-2012 with designed bacck support frame 35x35x3/ 50x50x5 mm of MS angle and verticle and lateral clearance given in clause 801 and 802, duly painted on back sde with tow coats of stove enamel paint. The nut bolts of board with angle iron post supporting structure as per require size of 75x75x5 mm angle after fixing at site has to be electrically welded class B (Type IV High intensity micro-prismatic grade sheeting - HIP) sheeting shall have 7 years written warranty from the manufacturers and authorised distributor isssued for field performance including the screen printed areas and cut out sheeting and cut out durable transparent overlay film. This item include the cost of structural steel work required for support system and complete MoRT&H Technical specification 801 & 802 complete all as specified and as directed.

Supply install, testing and commissioning air cooled split type air conditionar electric driven, single phase of cap 1.5 TR, BEE 5 star rated inverter type with environment friendly refrigerant R-32 with proper drainage of waste water complete all as specified and as directed.

Supply install, testing and commissioning air cooled split unit air conditionar electric driven, single phase of cap 2 TR, BEE 5 star rated inverter type with environment friendly refrigerant R-32 with proper drainage of waste water complete all as specified and as directed.

Note for Item no 119 and 120:- Rates are inclusive of extra copper pipe, drain pipe, outdoor stand, PVC cable where ever required and will not be paid extra.

SNEH TRADERS

divyarsh entrprise

TECH SERVE SOLUTIONS

ARTI CONSTRUCTION