Providing bunk House for Temporary jan sevakendra & other repairing work for temporary sifting mamlatdar office sagbara. Dist- Narmada

Name of Work :- providing bunk House for Temporary jan sevakendra & other

reparing work for temporary sifting mamalatdar office sagbara. Dist- Narmada

BILL OF QUANTITY

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Estimated Total

No. Rates Amount

1 Providing and fixing standared extruded of alluminium 0.20 Sqmt 1175.56

section of size 63mm x 38.10mm x 1.2mm @ Wt.

Kg/mt with colour anodized alluminium frame for ventilation

with 5 mm thick frosted glass as details etc complete for

2 Providing and laying Ceramic tiles 6mm thick in flooring 3.00 Sqmt 1017.30

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

3 Providing and fixing concealed center point to wall ceiling & 52.00 Rmt 208.80

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete. [B] 20 mm.

4 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 36.00 Rmt 339.05

working pressure poluthene pipes of the following outside

Dia. Low densidy, complete with special falnge compression

type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

5 Providing and fixing screw down bib taps of following 14.00 Nos 186.83

size.(A) Brass screw down bib tap polished bright. (i)

6 Providing corrugated G.I. sheet of class-3 roofing fixed with 162.00 Sqmt 734.19

glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding the cost of

purlins, Rafters and Trusses. Incl Providing ridges or hips

600 mm overall in plain G.I. sheet class-3 fixed with G.I.J.

or L Hooks and nuts 8mm dia G.I. Limpet and bitumen

washer complete.(1) 0.80 mm thick sheet. (upto 10 ton.

7 Steel work, welded in built up sections framed work 24.30 qntl 9448.07

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (D) In trussses and trussed

purlins, upto 25 M. span and 15 M. ovarall height

8 Providing and laying Ceramic tiles 8mm thick in skrting 9.00 Sqmt 1059.90

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

slurry (upto 10 ton)

9 Providing and fixing cast iron (Spun) Nahni trap of the 2.00 Nos 661.79

following nominal diameter of self cleaning design with C.I.

screaed down or higned grating including cost of cutting and

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

10 Providing & fixing water closet squatting pan (Europian) 3.00 Nos 1493.32

W.C. pan size 580mm (earth work) bed concrete foot rest

and trap and providing and fixing 100mm size P or S trap

for water closet squatting pan including jointing the trap with

the pan and soil pipe in cement mortar 1:1 (1 cement :

fine sand) and providing cement mortar 1:3 (1 cement :

coarse sand) and pair of white vitreous china 250mm x

130mm x 30mm foot rest vitreous china long pattern

squatting pan water closet & providing & fixing G.I. inlet

connection for flush pipe with W.C. orrissa type pan.

It. Item of Work Qty. Unit Estimated Total

No. Rates Amount

11 Providing and fixing wash basin with single hole for pillar 3.00 Nos 2472.18

tap with C.I or M.S brackets painted white including cutting

holes and making goods the same including C.P. brass

waste and waste pipes (A) Vitreous china. (ii) Flat back

wash basin 550 mm x 400 mm size (i) in white or colour.

including pillar tap 15mm brass screw doen

12 Providing and fixing full height Plan/colour PVC partition 28.00 Sqmt 2173.52

system 50mm thick consisting of 40mm sandwich PVC

panel made out of 36mm high density expanded

polystyrene sheet (E.P.S. Thermocol) stuck on both

sidewith 2mm thick plain PVC sheet reinforced with

framework made from 35mm x 5mm M.S. angle. In between

two M.S. angles 4 mm thick plan heat moulded PVC ‘C’

channel of size 50mm x 100 mm with feathered edes shall

be fixed on floor and 50 x 75 mm with feathered edges

plain/printed/prelim PVC ‘C’ channel shall be fixed in the

ceiling. Sandwich PVC panel shall be inserted in the PVC

“c” channel. The first and last M.S. angle should be erected

such that it is inside a PVC C channel of size 50 x 75mm. In

between adjoining EPS sandwiched PVC partition panel

4mm thick x 75mm width plain PVC sheet feathered at

edges shall be stuck on front and back face using solvent

cement etc. And additional 4mm thick PVC strip of 40mm

width is to be stuck on the interior side of the C channel

using PVC solvent adhesive complete as per direction of

Engineer in charge, manufacture’s specification and

13 Providing and fixing 35 mm thick shutters for Doors, 10.50 Sqmt 4101.06

windows and clerestory windows including Indian teak wood

frames 10 cm x 7 cm. size including anodized alluminium

fixtures and fastenings including primer coat of approved

quality and two coats of oil painting etc, complete. (ii) Fully

14 providing & fixing Sintex Prefabricated Insulated Ready to 2.00 Nos 375720.00

use Bunk House for E-Seva Office in the size of 16.8ft x

10.6ft x 8.6ft with walls & Roofing of PUF Insulated

sandwich panels including internal Electrification work

broadly as per drawing & Specification with inclusive of all

15 Excavation for foundation upto 1.5 m depth including sorting 9.00 cum 212.52

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft soil

16 Providing and laying cement concrete 1:4:8 (1cement : 4 0.90 cum 2738.11

coarse sand : 8 B.T. stone aggregates 40 mm. nominal

size) and curing complete excluding cost of from work in :(a)

Foundation and plinth

17 Brick work using common burnt clay building bricks having 4.02 cum 4310.73

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

18 Filling available excavated Earth (Excluding Rock ) in trench 9.00 cum 137.47

plinth side of foundation etc. in layer not excluding 20 cm in

depth consolidation each deposited layer by ramming and

watering etc. complete

19 Brick work using common burnt clay building bricks having 5.40 cum 4599.16

crushing strength not less than 35 kg./Sq.Cm. in supar

structure in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(B) Conventional

20 Providing and Laying ordinary cement concrete 1:2:4 (1 0.45 cum 6888.15

Cement 2- coarse sand : 4- graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs

having more than 10 cm and upto 13 cm. thickness

21 Providing TMT Bar FE 415 reinforcement for R.C.C. work 90.00 MT 68.33

including bending, binding and placing in position complete

upto floor two level

It. Item of Work Qty. Unit Estimated Total

No. Rates Amount

22 Providing 15mm thick cement plaster in single coat on 18.00 Sqmt 201.79

Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth

in (i) Cement mortar 1:3 (1-cement:3-sand)

23 Providing 10mm thick cement plaster (mala troweled finish) 2.25 Sqmt 177.35

in single coat on Celling,& Soffits of Stair, concrete wall for

interior plastering finished even and smooth in (ii) cement

mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

24 20mm thick sand faced cement plaster on walls uptoheight 21.00 Sqmt 353.98

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

complete.(extarier)

25 Wall painting (two coats) with plastic emulsion paint of 12.00 sqmt 84.82

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

26 Wall painting (two coats) with plastic emulsion paint of 2.25 Sqmt 90.48

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

27 Finishing wall with weather proof exterior emulsion paint on 19.20 sqmt 122.14

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

28 Providing and fixing S.W. gully trap with C.I. grating brick masonry 1.00 cum 1292.19

chamber and water tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i) Square mouth traps.

(A) 100mm x 100mm size P type.

Rs.Thirteen Lacs Twenty Eight Thousand Nine Hundred Sixty Three & Fourty Five N.P Only

I/We am/are willing to carry out the work @ Divisional Accounts Officer

% above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

*Estimated amount *Estimated amount

put to tender Rs._____________________ put to tender Rs. ________________

In words Rupees ____________________ In words Rupees ___________________

(*Please strike out whichever is not applicable)

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Divisional Accountant Officer Executive Engineer

const (R & B) Sub Division, Rajpipla (R & B) Division, Rajpipala (R&B) Division,

Dediapada Rajpipla Rajpipala