Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹9.0 LAdmitted-Finance | -10.05% | ₹9.0 L | L1 | Admitted-Finance |
| 2 | L2₹9.4 LAdmitted-Finance | -6.00% | ₹9.4 L | L2 | Admitted-Finance |
Updated dates
Tender Value
₹10.0 L
EMD Value
₹19,980
Closing Date
22 Apr 2026, 2:00 pmClosed
General Manager (Works)
Office of Addl. CEO. SASB
Completion of residential cum official complex of Camp Directors by way of construction of boundary walls and finishings of 04 rooms at Lower HolyCave.
2026_SASB_307784_2
SASB/eNIT/2026/09
Open Tender
Civil Works
35 days
Baltal Axis
Please refer Tender documents.
2 documents required · 2 mandatory
₹944
J and K Bank 0110040100014077
₹19,980
24 Apr 2026
13 Apr 2026
23 Apr 2026
13 Apr 2026
22 Apr 2026
13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work in built up round, square or rectangular/angular sections including cutting, punching, hoisting, fixing in position and welding/bolting with special shaped GI nut and bolts with steel and bitumen washers etc.complete job. Manufacturers: TATA, Jindal, Apollo, JSW, SAIL | |||||
| 2Providing and fixing M.S tubular frames for doors, windows, ventilators and cupboard with rectangular /L-type sections, made of 1.60 mm thick M.S Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of C.C. 1:3:6 (1cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size) . | |||||
| 3Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved srfaces, excluding the cost of p/-urlins, rafters and trusses and including cutting to size and shape wherever required. | |||||
| 4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | |||||
| 5Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases etc | |||||
| 6Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. | |||||
| 7Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. | |||||
| 8Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | |||||
| 9Engagement of labour for making dining table/ wardrobes with materials available in store. | |||||
| 9.01 | Carpenter Ist Class | - | days | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
BOQ_998220.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
