SPECIAL REPAIR / RENOVATION OF THE VIDYALAYA BUILDING OF KV AHMEDABAD

Amount

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface complete all as specified and directed.

M&L for rendering on fair faces of brick work in two layers i.e., 15 mm thick in CM 1:4 finishing the surface fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of Acrylic Emulsion Exterior (Apex Ultima) weather proof paint over one coat of primer complete all as specified and directed.

M&L for prepartion of newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface complete all as specified and directed.

M&L Udaipur Green marble 18-20 mm thick laid and jointed with grey cement slurry over and including 20 mm thick CM 1:3 screed bed complete all as specified and directed.(Note: All exposed side of stone slab to be rounding)

M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate in coping etc. as levelling coarse etccomplete all as specified and directed by Engineer-in-Charge

S&F Butt hinges, Medium weight, cold rolled mild steel, and fixed 100mm size complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete all as specified and directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each.

S&F mild steel angle iron work as in doors frames,gate chajja hollow square sections conforming to 410W(Gde E-250) quality-B including fixing of holdfast and hinges complete all as specified and directed.

S&F factory made 30 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S&F factory made 40 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F 200 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

S& F 125 mm Aluminum anodised Hasp and staple, safety type, with stainless steel steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for preparation of new wooden surface of any description n. exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F 125 mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-B (18mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.36mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Thickness of all aluminum sections used in frames /shutters etc shall not be less than 1.5 mm thick. Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle with or without opeing for AC as directed by EIC etc

S&F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete and all as specified.

S & F of mild steel work such as window guard bars and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

DMA PROJECTS

SNEH TRADERS