Development of Industrial Estate by way of Widening of Existing Main Road Construction of Approach Road PCC Drain RCC Retaining Wall and Approach Wall and Bridges with 3 yrs maintenance of Bituminous Works at Rakh Rara Swankha Samba

Amount

Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth to the disposal site as per the directions of Engineer-in-charge.

Providing and laying WATER BOUND MACADAM, with nallah stone aggregate and binding material including screening of 13.2mm size and stone dust; sorting spreading to template and consolidation with Power Road Roller of 8-10 tonne capacity complete. (Finished work including material and labour) 63mm to 45 mm size of stone aggregate including stone screening of size 13.2mm) including all carriages complete job.

Providing and laying WATER BOUND MACADAM, with nallah stone aggregate and binding material including screening of 11.2mm size and stone dust; sorting spreading to template and consolidation with Power Road Roller of 8-10 tonne capacity complete. (Finished work including material and labour) 53mm to 22.4 mm size aggregate with 11.2mm size screening) including all carriages complete job.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all carriages complete job.

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity over and including tack coat complete job.

Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge 25 mm compacted thickness with bitumen of grade VG- 30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity over and including tack coat complete job.

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead to the disposal site including all leads and lifts as directed by Engineer-in-Charge. All kinds of soil

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms including getting out excavated earth and disposal of surplus excavated earth to the disposal site as directed by the Engineer-in-Charge. All kinds of soil

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages complete job.

Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, including the cost of centering, shuttering finishing and cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 340 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately. All works upto plinth level and above plinth level upto floor V level including all carriges complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level including curing, centring, shuttering, finishing with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre (for weep holes)

Supplying and laying of RBM filling including levelling, watering, consolidation with vibratory road roller 8 to 10 tonne capacity including all carriages complete job.

Supplying and laying of hand packed stones on main abutment.

Providing and laying cement concrete flooring average 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing and all carriages complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .Thermo Mechanically Treated bars of grade Fe-500D or more (make Jindal Panther, TATA TISCON, SAIL) including all carriages complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, including all leads and lifts complete job.

6 mtr long GI pipe of C type with dia 62-75mm dia along with civil foundation 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 450 x 450 x 900 mm with base of GI pipe welded with iron rods to be fixed in concrete. (Make Suryaprakash/Jindal/Astral)

Supply & erection of 9 mtr long poles (ST -410 SP 33) Complete with accessories. (Pole make: Bajaj/Crompton/Utkarsh)

9 mtr pole

Galvanized Nuts and Bolts ( Supply and fixing complete job as required)

Red Oxide ( Supply and painting complete job as required)

Aluminium Paint ( Supply and painting complete job as required)

Cement Bottoming 1:2:4 mix as per REC Standards 0.5 cum/pole

Supply , installation, testing and commissioning of 60 watt solar street light ( all in one)of following specifications:( Make: Havells/Jaquar/ Philips), wattage =60 w, Lumanaire efficiency: 120lm/watt, Min. Warranty= 2 years, Charge controller efficiency> 90%, Ingress protrction = IP 65

Supply and fitting of 120 Watt LED (IP65/65) Street/flood Light Fitting. Energy saving, environmental friendly, long life, exclusive innovative die cast aluminum IP65 street light with high power LEDs ( Make: Havells/JAQUAR/PHILIPS)

Supply of 12 Mtr. High Mast system with its accessories. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 part 3. It shall also include accessories for high mast including head frame, steel wire rope of 6 mm dia. , trailing cable, double drum winch, galvanized Lantern carriage arrangement suitable for luminaries upto 120 W LED FLOOD LIGHT) symmetrically and its control gear boxes and lightening final. The mast shall have an integral power tool installed inside the base compartment for its operation including supply of foundation bolts, manufactured from special steel along with nuts, washers, anchor plate, templates and aviation obstruction lights.Item is inclusive of transportation, carriage, Foundation with a mix of 1:2:4 (Make: Bajaj/Crompton/Utkarsh)

Supply of outdoor stand mounted feeder pillar with 32 A TPN MCB incomer, Analog time switch, 22 A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals.

Power supply cable of size 6 MM² 2 Core Copper armoured cable. The job also includes Supplying of 40 mm outer dia. Medium gauge ISI marked G.I/MDP Pipe including transportation to work site and Cable trenching /laying of underground cable with G.I pipe in all type of soil in concrete surface.( Make: Polycab/Havells/KEI)

Power supply cable of size 2.5 MM² 2 Core Copper armoured cable. The job also includes as per requirement Supplying of 40 mm outer dia. Medium gauge ISI marked G.I/MDP Pipe including transportation to work site and Cable trenching /laying of underground cable with G.I pipe in all type of soil in concrete surface..( Make: Polycab/Havells/KEI)

Supply and installation of outdoor feeder panel of Control panel (For High Mast Light + Street Lights – 2 Nos) fabricated out of 16SWG CRC sheet duly powder coated IP54 , mounted on ISA 45x5 mm angle frame. The panel will consist of: Incomer : iv. MCB : Rating : 63A TPN Qty: 03 No.v. Contractor: Rating : 63A 4P Qty: 03 No. vi. Digital Timer:2 nos Make: CPRI Approved Outgoing: v. Servo Stabilizer : 1 No Rating: 7.5 KW 3 phase voltage Range: 130-240V Type of Cooling: Air Cooled vi. MCB (Servo Output) Rating: 63 A TPN Qty: 03 No vii. MVB (Winch) Rating : 16A TPN Qty : 03 Nos viii. MCB (LED & Spare) Rating: 6A DP Qty: 15 Nos

KAPAHI CONTRACTS PRIVATE LIMITED

ESS ESS Enterprises Electronics

TRIKUTA BUILDERS