Annual maintenance contract for Execution of emergency civil work (misc. work, addition alteration etc. from below mention items list with rates approved ( of R&B SOR or DGVCL SOR ) to be carried out in Olpad Rural division for the year 2026-27.

Name of work : Annual Maintenance contract for Execution of emergency

Civil work to be carried out under various offices under Olpad Rural Division,

DGVCL for the year 2026-27.

Ref Description Unit Rate

Excavation for foundation upto 1.5 m depth including sorting out and

1 04B001B stacking of useful materials and disposing off the excavated stuff upto Cumt

50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

2 04B002B sorting out and stacking of useful materials and disposing off the Cumt

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Filling in foundation and plinth with murrum or selected soil in layers

3 4008A of 20cm. thickness including watering, ramming and Cumt

consolidating etc. complete.

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand brokenstone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Brick work using common burnt clay building bricks having crushing

5 06002CA strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cumt

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Extra for brick work in superstructure above plinth level upto floor

two level(C) Fly Ash Bricks

(i) Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1- Cement : 4 -coarse sand ) in foundation and plinth (C)Fly Ash

Extra for half brick masonry in superstructure above plinth level upto

floor two level. (C)Fly Ash Bricks

Providing and laying controlled cement concrete M.200 exposed

work with curing etc. complete including the cost of formwork but

9 05033A1 excluding the cost of reinforcement for R.C.C. work in(A) BEAMS :(i) Cumt

Having cross-sectional area 0.05 to 0.08 Sq.M(SOR,ITEM CODE-

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

10 05033A2 Cumt

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii)

Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

11 05033A3 Cumt

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(iii)

Having cross-sectional area more than 0.12Sq.M and upto 0.18 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

12 05033B1 Cumt

excluding the cost of reinforcement for R.C.C. work in (B)

COLUMNS:(i) Having cross-sectional area 0.05 to 0.08 Sq.M

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

13 05033B2 excluding the cost of reinforcement for R.C.C. work in (B) Cumt

COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but

14 05033B3 excluding the cost of reinforcement for R.C.C. work in (B) Cumt

COLUMNS:(iii) Having cross-sectional area more than 0.12Sq.M and

upto 0.18 Sq.M(SOR,ITEM CODE-05033B3, PG NO-61 )

Providing and laying ordinary cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

15 05032A1 Cumt

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(i)

Having cross-sectional area 0.05 to 0.08 Sq.M

Providing and laying controlled cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

16 05032A2 Cumt

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(ii)

Having cross-sectional area more than 0.08Sq.M and upto 0.12 Sq.M

Providing and laying controlled cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

17 05032A3 excluding the cost of reinforcement for R.C.C. work in (A) BEAMS :(iii) Cumt

Having cross-sectional area more than 0.12Sq.M and upto

Sq.M(SOR,ITEM CODE-05032A3, PG NO-59)

Providing and laying controlled cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

18 05032B1 Cumt

excluding the cost of reinforcement for R.C.C. work in (B)

COLUMNS:(i) Having cross-sectional area 0.05 to 0.08 Sq.M

Providing and laying controlled cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

19 05032B2 excluding the cost of reinforcement for R.C.C. work in(B) Cumt

COLUMNS:(ii) Having cross-sectional area more than 0.08 Sq.M and

Providing and laying controlled cement concrete M.150exposed work

with curing etc. complete including the cost of formwork but

20 05032B3 excluding the cost of reinforcement for R.C.C. work in(B) Cumt

COLUMNS:(iii) Having cross-sectional area more than 0.12Sq.M and

upto 0.18 Sq.M (SOR,ITEM CODE-05032B3, PG NO-60)

Providing TMT Bar FE 500 reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar 1:3

(1- cement:3-sand)(SOR,ITEM CODE-17002A, PG NO-159)

Extra over items 22 for finishing with a floating coat of neat cement

slurry. (upto 10 ton)

Extra over items 58 to 71 for plastering on ceilings and sofits of stairs

upto floor two level instead of plastering on walls.

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M.

1:1 (1-cement : 1-sand) etc. Complete.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6- coarse

26 14012BA Sqmt

sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry

including rubbing and polishing etc. complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3

27 14013A (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed Sqmt

with pigment to match the shade of slab including rubbing and

polishing etc. complete.

Providing and laying white glazed tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

28 14008AA Sqmt

cement : 3-coarse sand ) finishing with flush pointing in white

Providing and laying white glazed tiles 6mm thick in skrting risers of

29 14009AA steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- Sqmt

coarse sand) and jointed with white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

Providing and fixing extruded aluminum window having extruded

aluminum Colour Powder Coated section frame main outer size

127mm x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384

Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x

1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical

member of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section

no:8935,@ Wt. 1.398 Kg/mt) with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @

wt.of 0.456Kg/mt),vertical member of size 40mm x 18mm x 1.29mm

(of Jindal Section no:8947 @ wt.of 0.456Kg/mt/Section 8948,@ Wt.

0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

ciomplete for window

Providing fitting & fixing fully glazed/ partly glazed double leaf

anodised aluminium entrance door using extruded section fabricated

by standard manufactures with framing 10.15cm x4.45cm rectangular

section & door shutter made from 10.15 cm x 4.45cm aluminium

bottom section top & vertical section 15x4.45cm size using 5.5mm

32 no.0122 Sqmt

thick "Triveni"or HB4 plain glass with glazing deep rubber gasket with

locking arrangement(Godrej type) with all fixtures & fastenings of

anodised section with aluminium bedding floor spring mounted door

closer with all labours & materials etc. Complete as per drawing and

as directed by E.I.C.DGVCL SOR Sec. G, Item No.14 Page

order Providing fitting & fixing Door closure Hardwen make or equivalent as

33 no.0122 approved by EIC.Rate taken as per Sec.G,Item No.1N, Page No. 39 No.

Item (20% more rate taken as DGVCL SOR is of 2003)

Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC

DOOR SHUTTER consisting of frame made out of M.S. tubes of

gauge thickness and size of 19mm x 19mm for stiles and 15mm x

mm for top and bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture, M.S. frame shall be

covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x

50 mm forming stiles, and 5mm thick 75mm wide PVC sheets for top

34 10043 rail, lock rail and bottom rail on either side, and 10mm (5mm x 2) Sqmt

thick, 20mm wide cross PVC sheet as gap insert for top rail and

bottom rail, Panelling of 5 stiles and rails with 30mm wide x 5mm

thick PVC sheet beading on eighter side, and joined together with

solvent cement adhesive,. An additional 5mm thick PVC strip of 20mm

width is to be stculk on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction of Engineer in

charge, manufacture’s specification and drawing.

Providing and fixing 35 mm thick shutters for Doors, windows and

clerestory windows including Indian teak wood frames 10 cm x 7 cm.

35 10030B size including anodized alluminium fixtures and fastenings including Sqmt

primer coat of approved quality and two coats of oil painting etc,

complete. (ii) Fully Panelled.

Providing and fixing M.S. grills of required pattern to wooden frames

of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by

screws (A) Plain Grill.

Steel work, welded in built up sections framed work including cutting,

hoisting,fixing in position and applying a priming coat of read lead

37 11002AA paint. (A)In beams and joists, channels angles Tees, flats, with Q

connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like

White washing with lime on wall surface (two coats) to give an even

38 18001 shade including thoroughly booming the surface to remove all dirt, Sqmt

dust; mortar drops and other foreign matter.

Finishing wall with water proofing cement paint of on wall surfaces

(Two coats) to give an approved brand and manufacture and of

required shape even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powered materials.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete.

Wall painting (two coats) with plastic manufacture on undecorated

wall surface to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter and

sand papered mooth.

Extra over item 41 for every subsequent coat of wall painting with

plastic emulsion pain of approved brand.

Extra over item 41 for painting with plastic emulsion paint of

approved brand on ceilings and sloping roofs.

Applying priming coat over new steel and other metel surface after

and including preparing the surface by throughly cleaning, oil,grease,

44 19001 dirt and other foreign matter and scoured with brushes fine steel Sqmt

wood, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter.

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure.(A) 20mm

Providing and fixing to wall ceiling and floor 6.0 Kg. F/Cm2 working

pressure(B) 25mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure(C) 32mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure(D) 40mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure(E) 50mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure(F) 75mm

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure (G)110 mm

Providing and fixing Gun metal check or non-return fullway wheel

valve.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(B) 20mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(E) 40mm dia.

Providing and fixing chromium plated brass half trun flush cock (i)

Providing and fixing chromium plated brass half trun flush cock .(ii)

Providing and fixing chromium plated brass half trun flush cock (iii)

Providing and fixing screw down bib taps of following size.(A) Brass

61 23028A1 Each

screw down bib tap polished bright. (i) 15mm dia

Providing and fixing screw down bib taps of following size.(A) Brass

62 23028A2 Each

screw down bib tap polished bright. (ii) 20mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass

63 23028B1 Each

chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass

64 23028B2 Each

chromium plated screws down Bib Tap. (ii) 20mm dia..

Providing and fixing screw down bib taps of following size.(C) Gun

65 23028C1 Each

metal screw down bib tap. (i) 15mm dia

Providing and fixing screw down bib taps of following size.(C) Gun

66 23028C2 Each

metal screw down bib tap. (ii) 20mm dia.

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high

pressure with screws, shanks and back nuts. (ii) 20mm dia.

69 23030A Providing and fixing brass screw down stop tap.(A) 15mm dia. Each

70 23030B Providing and fixing brass screw down stop tap.(B) 20mm dia. Each

71 23030C Providing and fixing brass screw down stop tap©25 mm dia Each

Providing and fixing ball cock of approved. quality as directed.(A)

72 23037A1 Each

Copper Metal (i) 25mm dia.

Providing and fixing ball cock of approved. quality as directed.(A)

73 23037A2 Each

Copper Metal (ii) 50mm dia.

Providing and fixing ball cock of approved. quality as directed.(B)

74 23037B1 Each

Abonite (i) 25mm dia.

Providing and fixing ball cock of approved. quality as directed.(B)

75 23037B2 Each

Abonite (ii) 50mm dia.

Providing and fixing washbasin with single hole for pillar tap with C.I.

or M.S. brackets painted

Providing and fixing Urinal of approved quality including connection

Providing and fixing wsh down water closet (European type, W.C.

Pan) with integral P or S trap

Providing and fixing 600mm x 450mm bevelled edge mirrror of

Providing and fixing C.P. brass waste for washbasin or sink. (A)

32mmdia.(SOR,ITEM CODE-23020A, PG NO-191)

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

81 24016AA 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- Each

graded stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

82 24016BA 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- Each

graded stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(ii) Inside dimensions 500mm x 700 mm and 450mm deep

for pipe line with one or two inlets

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty nonpressure pipes I.S. class NP2 (B) 150mm

Providing and fixing and embedding sand, C.I. rain water pipes in the

(A) 75 mm dia pipe

Providing and fixing M.S. fan clamps of shape and size as specified in

existing R.C.C. slab

Providing erecting and fixing double coated Syntex PVC. (ISI) water

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm.

Providing and fixing C.P. brass shower rose with 15mm or 20mm

inlet.(A) 100mm dia. Each(SOR,ITEM CODE-23023, PG NO-192)

i) Providing and fixing glazed louvered glass windows and ventilators

with teak wood frame 10cm. x 7cm.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3

fixed with G.I.J. or L Hooks and nuts 8mm

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet fixed

with G.I. J or L Hooks,

93 22005 Carring out timber treatment to all wood work including drilling holes Sqmt

Applying general insecticide pest control treatment to floors,

Carring out plinth treatment to post construction / existing structure

by spraying chemical solution for termite control treatment

Carrying out wall treatment for termite control including spraying with

Providing and fixing eco-friendly light weight calcium silicate false

Filling in plinth with sand under floors including watering ramming,

99 4006 Filling available excavated earth (excluding rock) in trenches. plinth, Cumt

Providing and fixing pre-cast Rubber Dye inter locking concrete block

60mm thick with grade of concrete M250 pnumatic compressed by

100 14033 mechanically pressed and as per approved design including 75mm Sqmt

Sand layer for levelling and filling the joint with sand in proper line

and level etc complete.

Providing and laying cement concrete pavement (25mm to 50mm

101 14016A Cumt

thick) with 1:2:4

Providing and laying broken chine mosaic flooring for terrace using

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar

102 No.0122 Sqmt

creme out upto surface using white cement including rounding off

junctions and extending them upto 15 cm along the wall,clearing

with water and oxalic acid etc. as directed.

Providing and laying (to level or slopes) and jointing with stiff mixture

of Cement Mortar in proportion 1:1

Providing fitting & fixing partly glazed anodised aluminium partition

104 No.0122 Sqmt

using extruded section fabricated by standard manufactures

Providing and fixing double polished machine cut KOTAH STONE

105 No.0122 Sqmt

order No. Providing and and fixing of Precast ordinary cement concrete M

0122 Item for kerb/kerb block 150 x 300 x 500 mm.size.

order No, Providing and Fixing of RCC Grill for drain at specified location Size

0122 Item of RCC Grill - 600 x 450 x 100 mm / 450 x 450 x 100 mm

DEAD LOCK - Supply and fixing of SS dead locks of Dorma ref no-

108 No.0122 Nos

DOOR CLOSER (GODREJ/DORMA / HAFELE) TS 71 - Providing and

109 No.0122 Nos

fixing Door Closures

110 No. 0122 CONCEALED DOOR CLOSER (GODREJ/DORMA / HAFELE) ITS 96 - Nos

Providing & fixing 35mm thk Decorative type Flush door finish with

111 No.0122 Sqmt

veneer/1.5 mm thk

Providing and fixing T.W. Door frame of finished size 450 mm x

112 No,.0122 Sqmt

P/F factory made White UN-PLASTICIZED Poly Vinyl Chloride (uPVC)

113 No.0122 Sqmt

Windows/Ventilation/Doors

114 No.0122 Providing and fixing S.S. grills of required pattern to wooden frames Kg

Providing and fixing Stainless steel pipe railing using round S.S. pipe

115 No.0122 RMt

of various diameter of approved quality

FLOOR SPRING (GODREJ/DORMA / HAFELE) BTS 75 - Providing and

116 No.0122 Nos

fixing floor springs Dorma make BTS 75 V

DUCO PAINT - Providing and applying in 3 coats lacquer paint of

117 No.0122 Sqmt

118 No.0122 Providing and laying 1000 mm x 1000 mm Anti skid / Glossy Sqmt

Providing and laying 1200 mm x 600 mm Anti skid / Glossy

119 No.0122 Sqmt

Vitrified(GVT) full body 10 mm thick tiles

Providing and laying 1200 mm x 800 mm Anti skid / Glossy

120 No.0122 Sqmt

Vitrified(GVT) full body 10 mm thick tiles

'Providing and laying 600 mm x 600 mm Anti skid / Glossy

Vitrified(GVT) full body 10 mm thick tiles of approved make &

As per quality and color incl. re cutting square edges for joint free pattern in

order flooring,dado,skirting, treads of steps landing etc. over 20mm (

121 No.0122 average ) base of Cement Mortar 1:6 on new surface jointed with Sqmt

Item color cement slurry including finish/ over 20mm ( average ) base of

No.121 Cement Slurry 1:1 on new surface jointed with color cement slurry

with flush pointing in white cement and cleaning the surface etc

Providing and laying 450 mm x 300 mm Anti skid / Glossy

122 No.0122 Sqmt

Vitrified(GVT) full body 10 mm thick tiles

Providing and laying 900 mm x 450 mm Anti skid / Glossy

123 No.0122 Sqmt

Vitrified(GVT) full body 10 mm thick tiles

Providing and laying granite slab 18mm thick in skirting,dedo,risers of

124 No.0122 Sqmt

steps & landing laid on bed of 10 mm thick(Average) base of C.M. 1:4

Providing and fixing double polished machine cut 20 mm thick

125 No.0122 Sqmt

Granite Stone Partition

Providing and fixing sandwiched granite and kota as Kitchen platform,

126 No.0122 Sqmt

pantry, Basin counter etc. 20mm thick granite of approved color

Providing, laying and jointing in true line and level 160 diametre

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to ISI

14735-1999 of approved make for drainage system pipe line

order Providing, laying and jointing to level and slope 75 mm dia rigid

128 No.0122 ISI make of approved make PVC pipes of working pressure 6 Rmt

order Providing, laying and jointing to level and slope 110 mm dia rigid

129 No.0122 ISI make of approved make PVC pipes of working pressure 6 Rmt

Item Kg./sq.cm for "horizontal drainage" line in floors

order Providing, lowering, laying and jointing in true line and level 110 mm

130 No.0122 dia 6 kg / sq.cm. working pressure rigid ISI Supreme / Finolex Rmt

Item PVC pipe for "Rainwater" pipeline

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with briocks having croshing strength not less

than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty)

455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame

131 24016CA 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- Each

graded stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line. (more than 10 ton)

Extra over items 24.44 for every additional depth of 0.1M. of part

132 24017A thereof beyond 450mm depth for Brick masonry chamber.(i) for Each

455mm x 610mm size.

Providing and fixing in position European style water closet (EWC)

133 No.0122 Nos.

(HINDWARE - ESSENCE) make consisting

Providing, laying and jointing to level and slope 110 mm dia. rigid

134 No.0122 Nos.

PVC pipes of working pressure 6 Kg/sq.cm. for "W.C.connector"

order Providing and fixing low / high level flushing cistern Jaquar cat no

135 No.0122 WHT 3180 with with all fittings and fixtures complete as directed by Nos.

Item Engineer In charge.

order Providing and fixing low / high level Control plate Jaquar cat no CHR

136 No.0122 3119 with with all fittings and fixtures complete as directed by Nos.

Item Engineer In charge.

order Providing and fixing 15mm dia. brass screw down stop tap of

137 No.0122 approved quality(Jaquar cat no 5053) including fixing in pipeline etc. Nos.

Item complete as directed by Engineer In charge.

order Providing and fixing 15mm dia. brass polished bright screw down bib

138 No.0122 taps in pipeline of approved quality(Jaquar cat no 5047) etc. Nos.

Item complete as directed by Engineer In charge.

order Providing and fixing 15mm dia. brass polished bright screw down 2-

139 No.0122 Way Bib taps in pipeline of approved quality(Jaquar cat no 5041) Nos.

Item etc. complete as directed by Engineer In charge.

order Providing and fixing Hand Faucet & its Accessory of approved

140 No.0122 quality(Jaquar or equivalent brand) etc. complete as directed by Nos.

Item Engineer In charge.

order Providing and fixing 50mm dia. gun metal check or non return full

141 No.0122 way wheel valve in pipeline of approved quality etc. complete as Nos.

Item directed by Engineer In charge.

Providing and fixing 40mm dia. gun metal check or non return full

142 23031E way wheel valve in pipeline of approved quality etc. complete as Each

directed by Engineer In charge.

order Providing and fixing 25mm dia. gun metal check or non return full

143 No.0122 way wheel valve in pipeline of approved quality etc. complete as Nos.

Item directed by Engineer In charge.

order Providing & fixing 75 mm dia. PVC " Cowl Vent" of ISI make of

144 No.0122 working pressure 4 Kg/sq.cm. with adhesive solvent cement etc. in Each

Item true line and level etc. complete as directed by Engineer In charge.

Providing and fixing in position cowel went to pipes.(C) 100mm dia

145 23006C Each

complete as per direction of engineer in charge.

Providing and fixing UPVC pipes, having thermal stability for hot and

As per cold water supply including all UPVC plain and brass threaded fittings

order including fixing the pipe with clamps at 1m spacing. This includes

146 No.0122 jointing of pipes and fittings with one step UPVC solvent cement and Rmt

Item the cost of cutting chases and making good the same including

No.146 testing of joints complete as per direction of engineer in charge.

Providing and fixing CONCELAED UPVC pipes, having thermal

stability for hot and cold water supply including all UPVC plain and

brass threaded fittings including fixing the pipe with clamps at 1m

spacing. This includes jointing of pipes and fittings with one step

147 No.0122 Rmt

UPVC solvent cement and the cost of cutting chases and making good

the same including testing of joints complete as per direction of

engineer in charge.

Providing and fixing CONCELAED UPVC pipes, having thermal

148 No.0122 Rmt

stability for hot and cold water supply15mm dia pipes

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Providing and fixing Flat back long pattern urinal of approved

quality(Dyna-Hindware)

Providing & fixing white color flats vitreous China "Wash basin" of

approved quality(Wave-Hindware)

Providing & fixing white color flats vitreous China "Wash basin" of

approved quality(Amazon-SW-Hindware)

order Providing & fixing pillar taps of approved quality(Jaquar cat no

153 No.0122 5001) with capstan head screw down high screws, shanks & back No

order Providing & fixing pillar taps of approved quality(Jaquar cat no

154 No.0122 5005) with capstan head screw down high screws, shanks & back No

order Providing & fixing pillar taps of approved quality(Jaquar cat no

155 No.0122 5309) with capstan head screw down high screws, shanks & back No

Providing and fixing 600mm x 450mm bevelled edge mirrror of

156 23024 superior glass mounted on 6mm thick A.C. sheet or plywood sheet Each

and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

157 23025 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x Each

Providing and fixing Stainless steel A ISI 304 ( 18/8) kitchen sink (

NIRALI BRAND ) as per IS

159 23027 Providing and fixing toilet paper holder.(A) C.P. Brass Each

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm

160 24006AA Each

size (inside) with standard weight.(i) Square mouth traps. (A)

100mm x 100mm size P type. (upto 10 ton)

As per Providing and fixing H.D.P.E ( SINTEX ) single wall construction one

order piece moulded cylindrical vertical with closed top/lid PVC water

161 No.0122 storage tank of required capacity on any floor of approved Ltr

Item brand(sintex or equivalent) includig providing and fixing 40 mm dia

No.161 G.I pipe connection for inlet, outlet,overflo

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of read lead

paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like (upto

Gypsum board false ceiling-- Providing , erecting, GI framing

perfect in line & level with GI angles fixed to the RCC ceiling, GI studs-

163 No.0122 Sqmt

(main members) in size2"*1" spaced at 2' c/c, suspended from the

RCC ceiling with angles,

order Partition glass in Living Room/Bed Rooms/Bathrooms-Providing &

164 No.0122 fixing 12mm thk toughened extra clear float glass partition including Sqmt

Item doors or opening ( including of floor spring or doorcloser)

order Glass Platform for court yard area - Providing & fixing 12mm thk

No.0122 +12mm thk with flim of 3M toughened extra clear float glass

order Providing & installing as per instruction - Rebar as per specifications

166 No.0122 in RCC /Masonry including drilling holes, aligning, etc. complete -- Nos

Item HILTI make or Equivalent chemical -10 mm dia

167 No.0122 do 12 mm dia Nos

168 No.0122 do 16 mm dia Nos

Welding reinforcement bars on both sides to existing insert plates,

169 No.0122 RMt

Structural Steel members, reinfo. Steel bars etc.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

170 15001A bitumen and G.I. limpet washer or G.I. limpet washer. filled with Sqm

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Providing ridges or hips 600 mm overall in plain G.I. sheet class-3

171 15002A fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Limpet and Sqm

bitumen washer complete. (1) 0.80 mm thick sheet. (upto 10 ton)

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

172 04010C Each

directed within a lead of 50 Meter for following diameter of pipes.(iii)

Add to or deduct from the rate for Bore Holes of 3.5m Depth, if bore

173 04012C holes are made deeper or shallower than 3.5M for Piles of following NO

diameter.(iii) 300 mm.

Extra for under reaming inside the bore holes for under reamed piles

of following diameter

Providing & fixing G.I. Barbed wire fencing (12/14 Gauge) having

horizontal rows & fixing with angle posts or R.C.C. poles by means

175 No.0122 RMT

of G.I. U pins or 14 Gauge G.I. Wire as per drawing etc., complete

as directed by E.I.C.

Providing & fixing sliding/Openable type 40mm. Dia Mild Steel Pipe

`B' class all round and 20mm. dia. M

177 L007 Labour Charges Carpentar 1st class (SOR,ITEM CODE-L007, PG NO-9) Each

178 L037 Unskilled Labour (SOR,ITEM CODE-L037, PG NO-10) days

179 L018 Labour Charges Mason 1st class (SOR,ITEM CODE-L018, PG NO-9) Each

Providing & Fixing Washable Window roller blinds/curtains of good

180 No.0122 SFT

quality as per sample approved by EIC.

order Removing the existing deteriorated china mosaic water proofing tiles

181 No.0122 and carrying out fresh china mosaic after performimg he necessary Sq.Mt.

ItEM steps and etc. complete as per the instructions of EIC.

Removing and Refixing the window after necessary

repair/maintenance and if required provide new bearing/busing or any

182 No.0122 Sqft

other part if required including all labour and material etc. as per

instructions of EIC

Removing and Refixing the window with MS Grill after necessary

repair/maintenance and if required provide new bearing/busing or any

183 No.0122 Sqft

other part if required including all labour and material etc. as per

instructions of EIC

Providing and fixing alluminium section door lock with all necessary

184 No.0122 Nos

fittings as per instruction of EIC(MR)

Providing and fixing glass door lock with all necessary fittings as

185 No.0122 Nos

per instruction of EIC(MR)

Providing and fixing wooden/glass/alluminium door closer with all

186 No.0122 Nos

necessary fittings as per instruction of EIC(MR)

Providing and fixing seat cover of W.C. with all necessary fittings

187 No.0122 Nos

as per instruction of EIC(MR)

Providing and fixing jet spray/hand faucet of W.C. with all

188 No.0122 Nos

necessary fittings as per instruction of EIC(MR)

Providing and fixing flush tank of W.C. with all necessary fittings as

189 No.0122 Nos

per instruction of EIC(MR)

Providing and fixing wooden file storage with openable shutter with

As per 450 mm deep shelves partition and sides with all outer and inner

order plywood surface covered by 1mm th. SF laminate finish using 18mm

190 No.0122 th. vertical horizontal and shutter, 12mm th. back, shelves Sq.mt.

ITEM commericial plywood approved make, 01 mm th. SF finish laminate,

No.190 teakwood liping, SS conciled handle, sliding lock & necessary

hardware materials etc. inside and liping french polish finish complete

in all respects by engineer in charge.

Double layer Roller Blinds Providing and installing Zebra double laye

rroller blind Polyester corded including all fixtures.

Providing and laying full body Vitrified double charged tiles 9 to

As per mm thick 600 x 1200 in flooring over 75mm (Average) base of

order cement mortor 1:6 (1-cement : 6-coarse sand ) finishing with flush

192 No.0122 pointing in white cement with with 3-5 mm grove Make as approved Sq.mt.

ITEM by client / Consultant of Approved colour . Cleaning and complete.

No.192 Rates are including of Filling Grove with Redy mix Polymer mix

cementenious based Grout Or Pure Epoxy Based Grout Material. . For

all height and lead.

Texture Plaster (Outer Wall)

As per Providing and applying 2mm thick Texture Plaster Terre Palette

order (Spectrum , Coral or equivalent) incorporating fine filaments made of

193 No.0122 polymer and aggregating natural stone powder with making grooves Sq.mt.

ITEM on base coat of 20 mm thick smooth mala plaster (which paid

No.193 separately) etc. complete. Colour and shade as approved by

Architect/ Engineer in charge for at all floor ,all height.

Carpet Floor work providing & fixing machine made Loop Pile Carpets

As per of 100% polypropylene with Total Pile wt. ± 5% 600 gsm and Gauge

order 1/10". The carpet effective pile height ± 5% 5.5 mm and Total Carpet

194 No.0122 wt. ± 5% 1600 gsm. This item to the satisfaction of the engineer-in Sq.mt.

ITEM charge and consultant. The rate shall have including stair nose profile

No.194 (Radium type), Glue and all hardware, labour etc. complete as per

detail drawing and instruction of engineer-in charge and consultant.

Full ht. Partly glazed partition Providing and fixing full height partly

glazed partition with 8mm glass (Low-e)installation upto ceiling or

beam bottom as per drawing and the structural framing of Aluminium

square pipe size of 50mm x 25mm and 1.6mm thick all vertical and

horizontal member 600mm c/c both direction fixed by aluminium

angle size of 25mm x 25mm x 25mm for proper finishing with both

As per side cover with 8mm plywood with grooving detail as per design. All

order exposed edges shall be covered with necessary sizes wooden patti

195 No.0122 finish with melamine polish in approved shade. The plywood fixing Sq.mt.

ITEM properly without any air gap and finishing with selected laminate

No.195 finish as per design. The glass shall be finished with vinyl film as per

design. Before installation, make hole/face plate for conduit pipes of

electrical / networking cables with openable stud from partition. Rate

shall include necessary itching film, Including all materials and labour

etc. complete as per detail drawing and instruction of ngineer-in

charge and consultant. (Mode of measurement shall be till false

ceiling lvl.) (Basic Cost of laminate Rs. 475/- per Smt.)

GLAZED PARTITIONS ON PATCH FITTINGS

Providing and erecting 12mm thk

As per toughened glass partitions as indicated on

order the Architect's drawing. The partition shall

196 No.0122 consist of 10mm thk. toughened glass of Sq.mt.

ITEM Modiguard/ Asahi/ Saint Gobain or equivalent

No.196 make fixed on patch fittings of Dorma/ Archie

/Dunex or equivalent make as approved by the

Architect. The job includes making necessary

pharmas etc. complete.

Providing and fixing 12mm Toughened glass Doors in Double leaf of

sizes mentioned in the

Architect's drawing / Doors schedule or as

directed by the Engineer Incharge / Architect.

The 12mm toughened glass doors shall be fixed

using S.S. patch fitting of 316 grade of Dorma / Geze or equivalent

make with prior approval of the Architect / Engineer Incharge.

The 12mm thick temperd glass must meet the

safety specification specified in ANSI Z97.1 CPSC 16 CFR 1201, ASTM

C 1048 & shall be free of any manufacturing defect All the edges of

the glass shall be mirror polished The installation of toughned glass

shall comply with the recommendations of the

patch fittings manufacturers and shall comply to there standard sharp

The door shall be provided with tubular,

lockable, pull handles with tumb turns 84"

length and made from S.S. 316 S.S.

grade of Geze/ Dorma or equivalent make.The

door shall also be provided with floor concealed

closer adequately capable of controlling the door weight.

The closers will have selectable delayed

action standard without backcheck.

The closer shall be used with sealing compound

to prevent water or cleaning solvent from

entering the case.The plate finish shall be S.S.

316 grade satin finished.

Providing and applying Wall painting (three coats) with plastic

emulsion paint andtwo coats of putty & two coats of primer of

approved brand and manufacture on wall surface to give and even

shade including throughly brushing the surface free from mortor

droppings and other foreign matter and sand paperd smooth on new

work to give an even shade.for all height.

Filling in foundation and plinth with brick bats chhara in layers of

199 04009A cm. thickness including watering ramming and consolidating etc. Cumt

Providing and filling rubbles includin packing and filling interstices

with quarry spalls in plinth/WBM road making layers etc. complete

200 27006A Cumt

with consolidating & levelling the top surface to required gradient and

rolling with power roller as directed.

201 M179 Crushed stone aggregate for Hard Quality 40mm size Cumt

As per Supplying & Spreading of crushed stone aggregates. Chippings etc. of

order hard stone of following nominal size free of disintegrated pieces.

202 No.0122 Deleterious and organic matter (for bitumen surface dressing etc.) Cumt

ITEM and gradings as per(60 % 40 mm+40% 20 mm ) and supplying of

No.202 screened cleaned pea(rounded) gravel of 10mm nominal size

Rolling and consolidation water bound macadam (Except laterite and

kankar) including watering not exceeding 150 mm thickness (main

203 26021 layer including binding mats. Including filling in depressions which Smt

occurs during the process. (B) With power roller exceeding 8 ton and

not exceeding 12 ton.

order Providing & fixing "DGVCL" led fitted logo having light letter white

204 No.0122 arcylic including necessary power supply and fitting with one year Run Inch

ITEM warranty of height 2.5 ft

Box type metal letters forming composite box made from 1mm thick

stainless steel plate of grade 304 having colour finish of approved

color by consultant / clent for following font size to be placed at Main

Gate and on individual blocks and fixing charges shall be paid extra

which shall be approved before fixing by client / consultant.600mm

order Aluminium composite panel signage of 5mm thickness and any

206 No.0122 finish/colour, proposed by Architect /Client having following font Smt

ITEM height for Building

Providing and fixing Chicken mesh jali (22 gauge) at the junction of

different surfaces of different material component at the time of

207 No.0122 Sqmt.

plastering to prevent cracking in plaster surface as and where

directed at all floors with all leads and lifts etc.

Providing 20 mm thick double coat mala cement plaster on

interiorand Exterior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1 Cement

208 No.0122 Sqmt.

: 4 coarse sand) in rough finishing and 8 mm thick top coat of cement

mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. for all height and all lead.

Providing & erecting water cooler having storage capacity 150 Ltr. &

As per cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

order outlet temp. of the water should drop by 15˚C within a hour, The

209 No.0122 water cooler should be comprising of hermetically sealed compressor, Each

ITEM fan motor, condensing unit, water tank surrounded by evaporating,

No.210 coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless

Supplying & erecting reverse osmosis (RO) water purification system

with M.S. powder coated pedestal frame, prefilter housing carbon

filter suitable buster DC pump, auto low & high pressure switches

with following size of LPH capacity & erected as directed [D] 100 LPH

with 1 phase / 3 phase Raw water pump of 500LPH @ 2.5kg/cm2 -

210 No.0122 Each

(1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 No), Micron

cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @

10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with

RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No),

- 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

Miscellaneous items which are not included in the above list and

require to execute, shall be payable as per latest R&B SOR, Surat or

211 As per requirement

any WO. Rate for Non SOR item shall be counted as per rate analysis

approved by EE (Civil) Corporate office

Note: Rates are excluding GST

Executive Engineer (O&M)

DGVCL, Olpad Rural Division