SETTING UP OF OPEN GYM AT TOWN SQUARE AT SULTHANBATHERY WAYANAD DISTRICT

Amount

Setting up of Open gym

16.91.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

od71475/2024_2025 : PENDULUM- Providing and fixing Pendulum - FNF 012 (Make FUN PLAY )using, Minimum 100 NB GI C-class Pipe for MAIN FRAME, Minimum 40 NB GI B-CLASS Pipe for LEG FRAME, Minimum 25 NB & 32 NB GI B-CLASS Pipe for HANDLE FRAME, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71478/2024_2025 : LEG LIFT POST- Providing and fixing ABB Trainer - FNF011 (Make FUN PLAY )using, Minimum 80 NB GI B-class Pipe for MAIN FRAME, Minimum 32 NB GI B-class Pipe for SIDE FRAME, Minimum 25 NB G.I. PIPES for INTERMEDIATE PIPE, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71484/2024_2025 : LEG EXTENTION- Providing and fixing Cycle - FNF020 (Make FUN PLAY )using, 25 NB & 40 NB GI B-class Pipe for MAIN FRAME, 32 NB GI B-CLASS Pipe for SEAT FRAME, 25 NB GI B-CLASS Pipe for HANDLE FRAME, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71488/2024_2025 : FUN ROWER- Providing and fixing Bench with fix weight - FNF 003 (Make FUN PLAY )using, 100 NB G.I C-Class pipe for main frame, 32 NB G.I B-Class pipe for Bench frame, 20 NB G.I B-Class pipe for Handle frame, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71490/2024_2025 : CYCLE- Providing and fixing Cycle - FPSPCL208 (Make FUN PLAY )using, 25 NB & 40 NB GI B-class Pipe for MAIN FRAME, 32 NB GI B-CLASS Pipe for SEAT FRAME, 25 NB GI B-CLASS Pipe for HANDLE FRAME, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71494/2024_2025 : ABB TRAINER- Providing and fixing ABB Trainer - FPSPCL187 (Make FUN PLAY )using, Minimum 80 NB GI B-class Pipe for MAIN FRAME, Minimum 32 NB GI B-class Pipe for SIDE FRAME, Minimum 25 NB G.I. PIPES for INTERMEDIATE PIPE, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71496/2024_2025 : ONE SEATING CUM 2 STANDING TWISTER- Providing and fixing Tai chi cum twister - FPSPCL215 (Make FUN PLAY )using, Minimum 100 NB GI C-class Pipe for MAIN FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for TWISTER DISC, Minimum 25 NB & 20 NB GI B-class Pipe for SEATING FRAME, Minimum 80 NB GI B-class Pipe for SEATING FRAME STAND, Minimum 80 NB GI B-CLASS Pipe for TWISTER STAND, Minimum 25 NB GI B-CLASS Pipe for TWISTER HANDLE FRAME, LLDP Plastic- TWISTER DISC, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71497/2024_2025 : SKI TRAINER- Providing and fixing Ski trainer - FNF 014 (Make FUN PLAY )using, Minimum 100 NB G.I. C CLASS pipes for MAIN FRAME, Minimum 40 NB G.I. pipe for FOOT REST PIPE, Minimum 40NB & 25 NB G.I. pipe for HANDLE, Minimum 25 NB & 40 NB GI B-CLASS Pipe for CONNECTING PIPE, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for FOOT REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71500/2024_2025 : CHEST PRESS CUM SHOULDER PRESS- Providing and fixing Chest press cum shoulder press - FNF 016 (Make FUN PLAY )using, Minimum 100 NB GI C-class Pipe for CENTER FRAME, Minimum 40 NB & 32 NB GI B-CLASS Pipe for MAIN FRAME, Minimum 32 NB & 25 NB GI B-CLASS Pipe for HANDLE FRAME, Minimum 32 NB & 25 NB & 40 NB GI BCLASS Pipe for CONNECTING PIPE, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" for SEAT & BACK REST, Nylon 66 injection moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

od71501/2024_2025 : WALKER SINGLE- Providing and fixing Walker single- FNF 004 (Make FUN PLAY )using, Minimum 100 NB GI C-class Pipe- for MAIN FRAME, minimum 32 NB GI B-CLASS Pipe- for LEG FRAME, Minimum 25 NB GI B-CLASS Pipe for HANDLE FRAME, NYLON 66 INJECTION MOULDED CASING CLAMPS, LLDP Rotomoulded seat with inbuilt bolts 3/8" X 1.5" FOOT REST, Nylon 66 injection Moulded BEARING CAP & PIPE CAP, fully Done by first coat of Primer – jotun Brad 40-50 Micron thickness and Top Coat of pure polyester powder with 70- 80 micron thickness POWDER COAT including cost of concrete foundation , all materials, labour,etc all complete asper the instruction of Engineer in-charge

Electrification

1.7.2 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire

1.22.1 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75 mm X 75 mm X 60 mm deep

1.23.3 : Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.15/16 amp switch

1.23.5 : Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet

Electrical Fittings

od71474/2024_2025 : CABLING - Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required - 4 core 10 sq mm

od71477/2024_2025 : Supplying and fixing 45W Post top light fixture (Crompton) including cost of all materials, labor, conveying, errection etc all complete as per the Direction of Engineer in charge

od71482/2024_2025 : Supplying and fixing 3 mtr PU Decorative pole (Crompton) including cost of all material, foundation, labor, conveying, errection etc all complete as per the Direction of Engineer in charge

Installation CCTV Camera surveillance system

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

od71480/2024_2025 : Supplying and fixing HDMI Cable including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71483/2024_2025 : Supplying and fixing BACK BOX FOR CAMERA including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71486/2024_2025 : Supplying and fixing 4U/450 D Rack with PDU including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71489/2024_2025 : Supplying and fixing Cable laying with pipe and accessories including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71492/2024_2025 : Supplying and fixing FINOLEX RG 59 Cable including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71495/2024_2025 : Supplying and fixing DC Pin Connector including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71498/2024_2025 : Supplying and fixing BNC connector including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71499/2024_2025 : Supplying and fixing 10 AMPS POWER SUPPLY ERD including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71502/2024_2025 : Supplying and fixing WD 4 TB HARD DISK including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71503/2024_2025 : Supplying and fixing 18.5 inch ACER Monitor including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71504/2024_2025 : Supplying and fixing HIKVISION 16 CH DVR 5 MP including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71505/2024_2025 : Supplying and fixing HIKVISION 5 MP DOME CAMERA including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

od71506/2024_2025 : Supplying and fixing HIKVISION 5 MP BULLET CAMERA including cost of all materials, labor, conveying, errection etc all complete as per the direction of Engineer incharge

Drinking water Dispensers

50.18.7.3.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall

18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

od71481/2024_2025 : Providing and fixing Aquaguard Pure Chill 120 PSS RO+UV of size 750 X 570 X 1350 MM, 170-260V AC,1ph Operating Voltage, 120 Litres Water Storage Tank Capacity, 80 LPH Capacity with Comfort Level Water Outlet and 3 No of Faucets including cost of materials, labor, conveying etc complete as per the direction of Engineer in charge

18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

Development of Kids Fun zone

od71473/2024_2025 : Supplying and fixing Duplex Multi Play Fun System - 03 (DXMPFS03) Using, GI Hex .Platform 9'Ht (4x4), Roto Hex Cone Canopy, GI Hex. Duplex Mezzanine Platform 4'Ft, Roto House Canopy, Roto Square Deck Platform 7'Ht (4x4), Roto Tile Canopy, Roto Square Deck Platform 5'Ht (4x4), Roto Slant Bridge 8’Ft Long, Army Net Climber, FRP Rock Climber 7’Ht, Roto Jumbel Climber 5'Ht, Roto Cliff Climber 5'Ht, Roto Staircase 3’Ht, Roto Spiral Tube Slide 9'Ht, Roto Zigzag Slide 7’Ht, Roto Curve Tube Slide 5'Ht, Roto Shrimp Slide 3’Ht, Roto Double Wave Slide 3’Ht, Roto Slide Entry, Roto Bubble Pannel, Roto Cross Railing, Roto Window Railing, Roto Cross & Zero Railing, Double Post Swing, Roto Palm Tree and Roto Sparrow including cost of concrete foundation, materials, labor, conveying etc all complete as per the direction of Engineer in charge

od71476/2024_2025 : Supplying Good quality Polyvinyl chloride made Zorbing Ball for kids including cost of materials and conveying charge etc complete

od71479/2024_2025 : Supplying and fixing Water tank for Zorbing ball playing and kids pedal boat playing. Using SRF 760 GSM of Size 30 x 30 ft including cost of all materials, labor, conveying etc all complete as per the direction of Engineer in charge

od71485/2024_2025 : Providing and fixing 14mm good quality rubber mat for kids play area including cost of all materials labor, conveying etc complete as per the direction of Engineer in charge

od71487/2024_2025 : Supplying Good quality ABS Plastic made Pedal Boat for kids ( weight limit 50kg) of size 15-18 inch height and 1.5-2 feet length including cost of materials and conveying charge etc complete

od71491/2024_2025 : Supplying and fixing Seating Merry Go Round (FPMR16) including cost of all materials, labor, concrete foundation, conveying etc all complete as per the direction of Engineer in charge

od71493/2024_2025 : Supplying and fixing Deluxe Multiseater See Saw (FPSS22) including cost of all materials, labor, concrete foundation, conveying etc all complete as per the direction of Engineer in charge

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

50.6.7.2 : Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

od71507/2024_2025 : Supplying Good quality Swim Life Jacket Personal Flotation Safety Life Jacket Weight Capacity Up to 80Kg Buoyancy 100N Age 6 - 15Years (Orange) etc complete

od81011/2024_2025 : Supplying and fixing Maestro Bench 4' Height Long (FPGD29) including cost of materials, fixing, conveying etc all complete as per the direction of Engineer in charge

EXCLUSIVE OF GST

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of Insurance,Transportation, delivery and installation cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD specification and direction of Engineer at site.

5.CEMENT: Make use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

6.ELECTRICAL: Note: Rate should be inclusive of preparation of schematic diagram and getting approval from KSEB/Electrical Inspectorate. Statutory fees paid to KSEB/EI shall be paid by us separately.

Make of Electrical equipments/materials

All electrical materials/equipments shall be of best branded items with ISI, strictly as per schedule specification

Panel Boards: CPRI certified reputed manufacturers make

7.Rigid PVCPipes/Casing & Capping - A-ONE/REPUTED MAKE with ISI , Precession, Balco, GEO

8. STEEL WORK G.I.PIPE: Make: JINDAL, Tata or eq. primary make in the order of preference.

9.RCC: (Assessment of strength of concrete by Cube testing at Approved Govt labs as per IS) Cement make: Use Malabar cement only as per Govt. direction and in case of non availabilty of Malabar cement use Ultra Tech, Dalmia, Ramco or eq. brand in the order of preference.

10.STEEL REINFORCEMENT: Make: Tata,Vaishak, SAIL, JSW or eq primary make in the order of preference

11.CENTERING & SHUTTERING: (Centering and shuttering for different category of work may be considered separately.)

12.DELUXE MULTI SURFACE PAINT SYSTEM: Make: JOTUN, Asian, Berger, Nerolas or eq. in the order of pref.

13. ACRYLIC SMOOTH EXTERIOR PAINT/ SYNTHETIC ENAMEL PAINT/WHITE CEMENT BASED PUTTY/ CEMENT PRIMER: Make: Asian, Berger, Nerolas or eq. in the order of pref.

saaj constructions

CUBIX INFRASTRUCTURES