PROVN OF TOILET BLOCK AND GUARD ROOM FOR KOTE AT DIFFERENT LOCATION IN IMA DEHRADUN

Amount

Surface dressing not exceeding 15cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in any type of soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in soil complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc 50 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed

Hard core of broken stone/boulder of gauge.exc 63mm but n exc100 mm deposited spread and levelled in layer n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete all as specified and directed

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed

Rubber moulded Chequered cement concrete coloured tiles 25cm x25cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the surface of tiles over and including 15mm thick screed bed in CM 1:6 complete complete all as specified and directed.

Glazed ceramic coloured tiles of size 450 mm x 300 mm x 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile with and including 10 mm thick rendering in cement mortar 1:4 finished rough complete all as specified and directed

25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in floors and finishing the concrete surface fair and rough complete all as specified and directed

Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

Use & waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter including fair finished surfaces complete all as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed

Use and waste of formwork to sides and soffits of floors or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports etc. and similar work of fair finished flat surface of concrete complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed.

Use and waste of formwork to sides of square, rectangular or polygonal pillar, column, posts struts for fair finished surfaces complete all as specified and directed.

RCC (Design mix) M -25 , using 20mm graded crushed stone aggregate as in beams, cantilever bressummers lintel over 1.5 m span etc complete all as specified and directed.

RCC (Design mix) M -25 using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like complete all as specified and directed.

RCC (Design mix) M -25 using 20mm graded crushed stone aggregate as in foundations, including rafts, footing, foundation beams, plinth beams, bases for columns etc, basement slab, under-reamed piles and mass concrete etc complete all as specified and directed.

RCC (Design mix) M -25 using 20mm graded crushed stone aggregate as in pillar, column , posts struts complete all as specified and directed

Brick work with fly ash’ bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Brick work with fly ash’ bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Rendering 5mm thick plaster on concrete surfaces in CM 1:3, surface finished even and smooth without using concrete cement as in ceiling etc complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of block/brick masonary or concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick plaster on other than faces of block/brick masonary or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, CP jet and pipe etc complete including necessary PVC pipe fittings complete all as directed.

PVC conections 15mm size with PTMT nuts of 450 mm long complete all as specified and directed

Grating doom C. P 125mm dia with waste hole of PTMT (minium weight 40 gm) complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm setting and jointing with solven cement complete all as specified and directed.

75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp complete all as specified and directed.

110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches with MS clamp etc complete all as specified and directed

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of cement primer on walls complete all as specified and directed.

Preparing new or previously untreated surface of wall and applying three coats of white wash complete all as specified and directed

Preparing new or previously untreated surface of ceilling and applying three coats of white wash complete all as specified and directed

150 mm bore, salt glazed stone were (SGSW) drain pipe, grade 'A', laid to slope in tranches and jointed in cement mortar 1:1 including necessary testing for ensuring leak proofing complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested suitable for 150mm bore of pipe complete all as specified and directed

75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc complete all as specified and directed

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

20 mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR etc complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

Butt hinges, 100 mm long, medium weight, cold rolled, mild steel and fixed to frame complete all as specified and directed.

200 mm long aluminium anodized, barrel tower bolts of extruded seciton and fixed (ISI marked) complete all as directed

150 mm long aluminium anodized, barrel tower bolts of extruded seciton and fixed (ISI marked) complete all as directed

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

125 mm extruded aluminium alloy handles, fabricated type, anodized complete all as directed.

PVC waste pipe 32 mm dia with coupling suitable for urinal and wash hand basin down pipes of required length complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

PVC (SWR) bends any radius 75 mm bore complete all as specified and directed.

500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting complete all as specified and directed.

Gun metal,globe or gate valve with iron wheel head,screwed both end of iron pipes 15 mm bore complete all as specified and directed.

Gun metal,globe or gate valve with iron wheel head,screwed both end of iron pipes 20 mm bore complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.

Swivel Shower of PTMT any colour (minimum weight 40 gms) for fixing with 15 mm pipe complete all as specified and directed.

Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded as per drawing NO TD-688 Sh 1/17 to 17/17 complete all as specified and directed.

Steel window factory made with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded as per drawing NO TD-688 Sh 1/17 to 17/17 complete all as specified and directed.

Factory made steel ventilators with centre hung shutter including hinges steel peg stay as per TD Drg No TD-088 SH 1/17 to 17/17 complete all as specified and directed.

35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

3 mm thick sheet glass, ordinary quality and glazing with oil putty or fixed with wooden beads in squares not exc 0.5 Sqm in each pane complete all as specified and directed.

PVC (SWR) vent cowl 75 mm bore complete all as specified and directed

Rendering 10mm thick plaster on fair faces of block/brick masonary or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound complete all as specified and directed (water proofing compound shall be measured and paid separately)

Supply only waterproofing compound complete all as specified and directed.

75 mm dia of outlet cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate complete all as specified and directed.

Construction of soakage well of size 3.60M dia x 6.00 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 design mix concrete, including intercepting chamber, screen chamber fly ash brick work in CM 1:4, piaster where shown on drg shall be 12mm thick in CM 1:6, bearing plaster 15mm thick in CM 1:4, RCC cover slab in M-25,design mix filling with brick bats of gauge 80 to 150mm complete all as specified and shown Drg TD-309 sheet 1/4 to 4/4.

100 mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in floor finished even and smooth using extra cement including spike rolling or making impression of expended metals while the concreate is green complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed.

Sheet glass corner assembly consisting of 5.5mm thick sheet glass shelf 300mmx300 mm with chromium plated bracket guard and railing complete all as directed.

CP health faucet of 15mm bore to 15mm bore pipe complete all as directed.

10 ltr capacity PVC low level flushing cistern, valve less syohonic action type with inlet ball valve, PVC handle, brackets including superiors quality PVC long bend (flush pipe) of 32mm dia, complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550x400mm including bracket complete complete all as directed.

15mm dia pillar, cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or with out lettered 'Hot' or 'Cold'with long shanks and fly -nuts, screwed for iron pipe and complete all as directed.

15 mm bore angle cock two way, CP brass with fancy type handle, sc-rewed down, screwed for iron pipe 15mm bore complete all as directed.

15mm bore long body bib tap cast copper alloy chromium plated with wall flange with aerator complete all as directed.

15mm bore angle cock, CP brass with fancy type handle, sc-rewed down, screwed for iron pipe 15mm bore complete all as directed.

Chromium plated overhead shower dia 105mm round with revolving joints (with body rotation) & 115 mm long arm shower with rapid cleaning system and all fittings complete complete all as directed.

Chromium Plated brass single towel rail 20 mm dia & 600 mm long including a pair of CP brackets fixed with plastic rawl plugs & CP screws complete all as directed.

Chromium plated Soap dish holder complete all as specified and directed.

Excavation in post holes each n.exc 0.5 cum and getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers watering & removing surplus soil to a distance n.exc 50m & making good surface in any type soil complete all as specified and directed.

PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete all as specified and directed

PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete all as specified and directed

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as specified and directed.

Pre-cast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in cover slabs (for manhole, drain etc) and simililar articles with plain faces including necessary form work etc, set in cement mortar 1:4 complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of BOQ).

Mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fixing MS galvanised chain link fencing, of size 4mm dia and mesh size 100x100mm to any type of standards, rails, straining bolts etc including provision of binding mix for making fencing complete all as specified and directed.

Mild Steel screw bolts 5 to 10 mm dia (machine made ) with hexagonal or squre head at one end and screwed the other or screwed both ends to be fitted with washers and one hexagonal or squre nuts exc 5 cm but n exc 10 cm long complete all as specified and directed.

Mild Steel work as in posts and struts in fencing including cutting tops to shape as directed drilling holes notching bfor wires etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting and riveting etc complete all as directed.

Galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc fixed in repair complete all as specified and directed. (Each line wire to be measured)

Brick work with fly ash’ bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as directed

Point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLS having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit 25mm dia or higher with all fitting and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6mm thick, 60mm deep of required size factory made for mounting switch, regulators etc with and including 3mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Make of wire : Finolex, Havells, Polycab, Grandlay. Make of conduit : Finolex/Ess Ess Kay/ICL Note:- (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light/fan point /exhaust fan point controlled by one switch, one way switch 5/6 Amp

One3 pin/ 5 pin switch socket out let 5/6 Amps on the same board with other switch.

One3 pin/ 5 pin switch socket out let 5/6 Amps cotrolled by one switch independent board

Description all as per item No 98 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one 5 pin socket outlet 15 Amps controlled by one switch on independent board and 4 sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

Switch piano, flush type, single pole one way, 5 Amp complete all as specified and directed. Make:- Anchor/Legrand/Havells/C&S.

Socket outlet, 3 pin, 5 Amp flush type complete all as specifed and directed. Make:- Anchor/Legrand/Havells/C&S.

Switch Socket combination 2 in 1 , ,5 Amp flush type complete all as directed. Make:- Anchor/Legrand/Havells/C&S.

Switch Socket combination 3 pin , ,16 Amp flush type complete all as directed. Make:- Anchor/Legrand/Havells/C&S.

Electronic step rotary type fan regulator 100 W 230 Volts AC 50 HZ complete all as directed. Make:- Anchor/Bajaj /Havells/Usha

Ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate /isolated body complete all as directed. Make:- Anchor/Crab tree/Ess Ess Kay

Lamp holder angle type PVC/ polycarbonate body with cold grip cap suitable for pendent fitting complete all as specified and directed Make-,Havells/cona /Anchor

S&F wall mounted LED batten 20/22 W suitable for LED tube complete and connected the same with using PVC sheathed and insulated three core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting on wall complete all as specfied and directed. Make:- Havells cat part nos REGALBATTENT8UPTO 1x22 WDSBSWH or equivellent of /Philips/Surya Roshni Ltd/Syska/C&S.

LED tube light double side connection suitable for T8 fitting complete all as specfied and directed. Make:- Havells cat part nos CRYSTAL1213T8DSTL 20W LED865SGLASSor equivellent of /Philips/Surya Roshni Ltd/Syska/C&S.

LED Mirror light 14 W with complete and connected the same with using PVC sheathed and insulated three core flexible 23/0.0076 copper conductor cable including all accessories and fixing arrangement for fixing the light fitting on wall complete all as specfied and directed. Make : CG product code LCL-14-CDL or equivellent of /Philips/Surya Roshni Ltd/Syska/C&S.

25Watt LED cool white, energy saving IP66, environment friendly, long life, LED street light made up of pressure die-cast aluminium housing with high power LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP 66 protection and impact resistance of IK-07 including suitable size of bracket bent in shape including 2 Nos clamps, nut, bolts etc and fixing on walls complete including taking down existing light fitting etc complete all as directed. Make:- Cromption Cat Part No LSTS-25-CDL or equivalent to Philips/Surya Roshni Ltd/Syska/C&S

Ceiling fan 1200 mm sweep energy saving model AC single phase 240V , with electronic type regulator and accessories 5 star rated and connecting up including provision of cable form ceiling rose to fan complete all as specified and directed. Make- Havels Model No ES-40 or equivalent of Bajaj/Usha

Heavy duty exhaust fan 300 mm sweep with louvers single phase 240 volts, white in colours including necessary connection and replacement of flexible copper cable from ceiling rose acomplete all as specified and directed Make-,Havells model TETRBO Force SP or equivellent Bajaj / Usha/CG

MCB DB, sheet metal enclosures double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type and IP 43 degree protection fixed in repair complete all as directed. Make:- Indo asian cat part no - 811807or equivellent of Legrand, L&T, ABB, Schneider

MCB SP 6 to 40 Amps, 240 volts 'C' Curve 10 KA, including connection with suitable size copper lugs complete all as directed. Make:- Legrand, cat part no 408587 to408595 or L&T, ABB, Schneider, C&S

MCB SPN 40 to 63 Amps, 240 volts ,50 HZ, including connection with suitable size copper lugs complete all as directed. Make:- Legrand, cat part no 408618 to408620 or L&T, ABB, Schneider, C&S

LED ball lamp 15 W suitable for pendent fitting complete all as directed Make-,Havells/cona /Anchor

Supply and laying or fixing or passing through pipe XLPE insulated, armoured, heavy duty electric cables 1100 volts grade with stranded aluminum conductor of size16 sqmm 2 core laid in trench/wall/floor/trusses with saddle complete all as specified and directed. Make: Finolex/Havells/Polycab/Gloste

Un-reinforced precast concrete cable cover class LV type I, flat, size 250mm x 150mm x 40mm as proteciton to under ground cable laid dry flat adjoining each other complete all as specified and directed.

Supply and filling sand with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as directed. NOTE: - Punned thickness shall be measurement & paid.

GI pipe light grade ISI marked 40mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah with calmps, bolts, nuts & washers etc complete all as directed. Make:- Tata/Jindal /Prakash.

Boring of holes under road footpath, pavement, hard stanfing by trenchless technology using ultra sounding technique and necessary machine suitable for GI pipe 40 mm dia complete all as specified and directed.

Earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. NOTE: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted. (iii) If the desired earth resistance is not found within permissible limit shall be re done by contractor at no extra cost.

M/S Anil kumar

M/S RAJESH KUMAR GOYAL

M/S S P BUILDERS