Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹37.7 L+₹1.7 L (4.59%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹40.5 L+₹4.4 L (12.2%)Rejected-AOC HOUSE NO 2734 2ND FLOOR PHASE 7 SAS NAGAR MOHALI PUNJAB | S A S NAGAR | PUNJAB | 140103 | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
19 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160 003
PROVN/ADDN/ALTN TO MISC SECURITY RELATED WORKS AT AF STN MULLANPUR UNDER AGE (I) HIGH GROUNDS
2024_MES_636388_3
CWE/AF CHD/CHD/T-38/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per NIT
8 documents required · 8 mandatory
₹500
AGE(I)(AF) Highgrounds
₹86,000
7 Jun 2024
21 Mar 2024
26 Apr 2024
21 Mar 2024
19 Apr 2024
5 Apr 2024
Amount
AREA DRAINAGE
Material and labour for broken bricks hard core of gauge n.exc 63mm laid in layer n.exc 15cm thick deposited spread, levelled and rammed including watering complete all as specifeid and as directed. Note: The consolidated thickness shall be measured & recorded.
Dismantling of brickwork/brick masonry, built in cement mortar , including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregates as in surface channels and drains etc and similar work , complete all as specified and as directed.
Material and labour for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete etc and similar work complete, all as specified and as directed.
M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4), using old size bricks, as in drain, manhole etc complete all as specified and as directed.
All as per item No. 1.05 here in before but except bricks. Note:- Serviceable bricks retrieved against Serial item No 1.02 here-in-before shall be reused (Rates quoted shall deemed to be included for cleaning of bricks).
Material and labour for flush pointing to brick masonry wall in CM (1:4) complete all as specified and as directed.
Material and labour for extra for forming fair finished drain or channel 60cm inner girth in cement concrete using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and as directed.
Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish out MoD land complete all as specified and as directed
Material and labour for 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints as at an interval as specified and at each corner, the joint shall not be more than 12 mm and to be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid in pannels as specified and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of manholes, laying sewage pipes or for drains etc and getting out including trimming sides and leveling bottom surfaces, watering & well ramming to the required level/slope, complete all as specified and as directed.
Excavation over area in soft/loose soil not exceeding 1.5m in depth for foundation of manholes, laying sewage pipes or for drains etc and getting out including trimming sides and leveling bottom surfaces, watering & well ramming to the required level/slope, complete all as specified and as directed.
Excavation over area in soft/loose soil exceeding 1.5m and not exceeding 3m in depth for foundation of manholes, laying sewage pipes or for drains etc and getting out including trimming sides and leveling bottom surfaces, watering & well ramming to the required level/slope, complete all as specified and as directed.
Returning, filling in (excavated soil), including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and as directed.
Removal of excavated soil to a distance n exc 50m and deposting where directed at a level n exc 1.5m from the starting point complete all as specified and as directed
Material and labour for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in foundation, filling and mass concrete etc and similar work complete, all as specified and as directed.
Material and labour, RCC pipes 450mm dia, class NP3, laid on concrete bed and jointed in cement sand mortar (1:1) incl coller etc, and tested, complete all as specified and as directed.
Cutting opening in reinforced cement concrete walls for opening (to receive 450mm dia RCC NP3 pipe), including trimming surface to receive rendering etc complete all as specified and as directed
Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregates as in foundation, filling and mass concrete etc and similar work complete all as specified and as directed.
Material and labour for 100mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregates as in floor and pavings etc laid in alternate bays including necessary form work finishing surface of concrete topping even and fair without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.
Supply and fixing Factory made RCC Precast circular manhole cover (dia 600mm)/Rectangular Manhole cover (size 600x600mm) having minimum thickness 75mm with collar medium duty having load capacity not less than 10 Metric Ton complete all as specified and as directed.
Suppy and fixing framed work such as girlls, grating etc with ends of square bars shouldered/riveted or gorged into spikes, framed guard bars, barred iron doors and similiar work inlcuding necessary holdfast conforming to FE 290, Gde E-165 complete all as specified and as directed.
Cutting holes in brick wall in cemnet mortar for inserting holdfast of area exc half brick but n.exc one brick into or through brick wall and making good with cement concrete1:2:4 type B1 complete all as specified and as directed
Material and labour for hacking for key, raking out joints of old brick work or stone work built in cement mortar; not previously plastered; and scrubbing down with water etc. to receive plaster or flush pionting complete all as specified and as directed
FENCING WORK
Supply and fixing punched tape concertina coil 600 to 610mm dia made with high tensile strength galvanized mild steel wire 2.60 mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) with angle iron 'V'/'Y' shaped at security wall of approx height 3.00 metre and with 9 horizontal R.B.T and tied with G.I staples and GI clips to retain horizontal including necessary bolts on GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core 2.6mm dia wire minimum barb 9 mm width, covering per coil 8 to 10 running metres and fixed in position complete all as specified and directed. Note :-(i) The make of concertina coil & barbed wire shall be approved by GE conforming to the specifications before procurement. (ii) Mild steel angle (Y-Shape) shall be measured and paid separately if required at site.
Material and labour for running welding not exc 6mm thick in repairs to mild steel angle iron of any shape, any description as in posts or sturts, horns or any part of fencing post at various locations including cleaning and preparing the surface to be welded together, holding the member in true position while welding complete all as specified and as directed Note :- Necessary MS section such as angle, bars, flats etc if required shall be measured and paid seperately.
Material and labour for rolled miled steel angel iron post and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, including embeding in concrete and screwing etc conforming to Fe290 grade E-165 complete all as specifed and as directed.
Material and labour for prepration of new steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for prepration of old steel surface of any description, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
ELECTRIC SUPPLY
Disconnecting, dismantling/taking down and Shifting of steel tubular electric pole from one location and re fixing at another location alongwith with fixing of electric cable, street light, junction box, HDPE pipes on poles and all other connected items complete all as specified and as directed. Note :- Earthwork, PCC, Coping, Crane Hydra and other items as required shall deemed to be included in the quoted rates.
Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed.
Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 sqmm 4.0 core laid in trenches/on poles/road crossing or passing through existing/new pipe under road crossing, clamping on wall etc.complete all as specified and as directed. Note: (i) Earth work, removal, returning filling and pipe etc shall be measured and paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments, machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost. (iv) Route of laying new cable will be separate as per ground as per direction.
M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.
M&L for locally available, sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protection prependicular to the direction of cable adjacent to each other complete all as specified and directed.
Supply & fixing or laying in repair HDPE (DWC) pipe of outer dia not less 50 mm fixing on poles, walls, under floors, road, drain crossing, laying on surface etc as reqd at site complete all as specified and as directed. Note: All necessary items and accessories, bends, joints, nut bolts and clamps etc shall deemed to be included in the quoted rates.
Note: The Total amount shall subject to adjustment of credit of Rs. 36350.00 for old Materials as per Schedule of Credit.
N.N.CONSTRUCTION
Dhillon Construction Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .