Construction of 06 Clasroom at various Primary School in Nandod Taluka NARMADA District

No. 25 LC Amount

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated stuff

upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

2 sorting out and stacking of useful materials and disposing off 342.09 138.16 139.54 Cmt.

the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Filling with the available excavated earth (excluding rock) in trenches,

3 plinth, sides of foundation etc. in layers not exceeding 20cm in depth 592.39 136.11 137.47 Cmt.

consolidating each deposited layer by ramming and watering.

thickness inculding watering, ramming and consolidation etc. complete.

Brick work using

‐ common ‐burnt clay building bricks having crushing

5 strength not less than 35 kg./Sq.Cm. in foundationand plinth in Cement 73.25 5080.02 5130.82 Cmt.

Mortar 1:6. (1 Cement : 6 finesand)(C) Fly Ash Bricks

Masonry work with aerated light weight concrete Blocks of size 60cm x

23cm x 23cm or any other approved size, having crushing strength @

kg/sqcm Fixing with ready-mixed mortar ('Fixoblock'of M/s Ultratech cement

6 Ltd./Rapid Fix/Lion) having tensile adhision strength >0.8 N/mm2 and 195.42 4219.19 4261.38 Cmt.

compressive strength of >2N/mm2.The mortar is to be fixed in a thickness of

3mm to 5mm on the clean and leveled surface of blockmasonry using proper

trowel. For all floor and lead and lift For superstructure.

Brick work using common burnt clay building bricks having crushing

strength not less than 35Kg./Sq.Cm. for superstructure in cement mortar

1:6(1 cement :6 fine sand) including curing etc. complete. (C) Fly Ash Bricks

For all heights and all floor

Half brick in common brunt clay building bricks having crushing strength not

8 less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) (C) 70.24 767.33 775.00 Smt

Fly Ash Bricks in super structure including curing etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand :8

hand brocken stone aggregates of 40mm nominal size) in plinth and curing

complete including cost of formwork. (A) Foundation and Plinth - At plinth

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand :

10 10- hand broken stone aggregates 40 mm nominal size) and curing complete 12.31 2549.84 2575.34 Cmt.

including cost of formwork in (A) Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand :

graded stone aggregate 20 mm nominal size) & curing complete including

cost of form work (A) Foundation and Plinth -Below Tie beam, Plinth

protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse

12 sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and 118.90 301.38 304.39 Smt

finished with a floating coat of neat cement. (A) 40mm thick.

Providing and laying controlled cement concrete M.150 for curing

complete including cost of formwork and excluding cost of reinforcement

for reinforced concrete work in (A) Foundations, footings,Base of

columns and Mass concrete (Cement Level 290 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (C) Coping Vertical and horizontal for all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and Excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of columns and

Mass concrete.(Cement Level 380 Kg)

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

Providing and laying controlled cement concrete M.250 and curing complete

16 including the cost of formwork and Excluding the cost of reinforcement for 33.95 5824.95 5883.20 Cmt.

reinforced concrete work in Plinth Beams. (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

17 including the cost of formwork and excluding the cost of reinforcement for 10.30 7289.36 7362.25 Cmt.

reinforced concrete work in (C) Chajja all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

18 including the cost of formwork and excluding the cost of reinforcement for 59.00 6542.73 6608.16 Cmt.

reinforced concrete work in (C) Beams all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, Pillars posts and struts all floor

(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, Pillars posts and struts all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

21 including the cost of formwork and excluding the cost of reinforcement for 99.36 6777.44 6845.21 Cmt.

reinforced concrete work in (C) Slab all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in (E) Staircases including lending all floor

(Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

23 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, binding 45078.74 76.52 77.29 Kg.

and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on brick/concrete

24 walls & Ceilling & Soffit of stair interior plastering in cement mortar 1:4(1 808.73 160.51 162.12 Smt

cement 4 sand) watering, curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair side of

25 single or half brick wall for interior plastering in cement mortar 1:4(1 cement 1816.87 204.19 206.23 Smt

4 sand) watering, curing etc. complete.For all floors

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1 cement

sand) and 8mm thick finishing coat of cement mortar 1:1(1 cement 1 sand)

watering, curing etc.complete for any Height.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less

than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal

resistance, dirt resistance exterior paint of required shade (Company Depot

27 Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 1296.30 181.25 183.06 Smt

litre/ 10sqm. Over and including priming coat of exterior primer applied @

0.90 litre/10 sqm, Item Includes two coat of primar and putty with scafolding

at all level of work. As per Approval of Engineer Incharge.

Distempeing (Two coats) with oil bound washable distemper having VOC

content les than 50 grm/liter of approved brand and manufacture and of

required shade on wall surfaces to give an even shade, over and including a

28 priming coat and putty with alkali resistance primer of approved brand after 2382.90 76.53 77.30 Smt

thoroughly brushing the surface and other foreign matter and also including

preparing the surface even and sand parpered smooth As per Approval of

Engineer Incharge

Painting two coates (Including Priming coat)having Low VOC content over

new steel and other metal surfaces with enamel paint,primar coat, brushing,

interior to give an even shade including cleaning the surface of all dirt,oil,

grease,dirt, dust and other foreign matter with fine steel wood, scrapers and

sand paper with ready mixed priming paint brushing red lead etc.

complete.(As directed by Engineer in charge)

Providing and laying 25mm thick polished Kota stone flooring/staircase

treads (two pieces with three groves in front of steps) over 20mm (average)

30 thcik base of cement mortar 1:6 (1 cement 6 coarse sand) laid over and 153.33 1009.30 1019.39 Smt

jointed with grey cement slurry including curing, rubbing, and polishing etc.

Providing & fixing average 25mm thick Double polished Kota stones for

31 shelves in cup board, seating plat form, including curing, rubbing, polishing 26.01 807.50 815.58 Smt

etc. complete. (As directed by Engineer in charge)

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

Providing and laying 18 mm thick mirror polished black granite stone

machine cut in single piece (Max. available) in sill and jambs laid over

mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand) and jointed with

grey cement slurry with matching pigment incl. rubbing and polishing half

rounding edge both side etc. complete colour and shed as approved by

architect engineer in charge. (As directed by Engineer in charge)

providing & laying cement water proofing of average 60mm thick for terrace

for all floors using first layer cement mortar (1:3) over an exsisting surface

second layer of arranging brick bats acording to slop adding suitable

33 chemical to make water tieght & again third layer of cement mortar 1:3 on 273.59 351.03 354.54 Smt

above including adding water proffing compound and finishing top with net

cement slury using cement @ 2.75 kg/sq mt. making any patterns and design

on the top etc. complete as directed.(As directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve surface

12mm to 20mm of broken piece of ceramic tiles or Glazed tiles ( one or more

colour as directed by Engg. In charge ) to be laid over cement mortar bedding

of CM 1:3 to plain or and slopes and to be tempered to bring mortar cream up

to and colour pigment including rounding of junctions and extending them

pu to 15cms along the wall and curing with bends any patterns of designs as

per deawing or directions including cleaning with water and oxilic acid using

1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in cement mortar

35 1:1 including neat cement finishing, watering etc. complete Respectely 163.30 24.04 24.28 Rmt

plaster acitivity shall be commenced only after completion of vata work.

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at lock

rail,10 mm square bar in vent at10 cm c/c coverd with corrugated ms sheet

0.6 mm thick, including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As directed by

Engineer in charge& approved drawing and design etc.)

Providing & fixing in position mild steel window with ventilation frame

35x35x5 mm and shutter frame 25x25x5mm ,10 mm square bar grill at10 cm

c/c coverd with corrugated ms sheet 0.6 mm thick,including applying a

priming coat of read lead paint including cleanicn the surface of all dirt, dust

and other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal

Section no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size

61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal

Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

Steel work, M.S Grill, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of read lead

39 paint. (A)In beams and joists, channels angles Tees, flats, with connecting 3364.11 90.18 91.08 Kg.

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

40 Providing & fixing G.I rain water Spout of 65mm dia and 60cm length. 22.00 710.36 717.46 NO

Painting of logo on front side wall as directed by Engineer in charge and as

per approved drawing.

Providing and fixing Chicken mesh jali (22 gauge) 15cm wide at the junction

of 2 different surfaces of different material component at the time of

plastering to prevent cracking in plaster surface as and where directed at all

floors with all leads and lifts etc.complete.

Providing & Fixing Green board(2400mm x 1200mm) with soft

43 board(1200mm x 1200mm) on wall as per the drawing & design etc. 7.00 10250.00 10352.50 NO

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt x2.46mt x4.00

mt size brick masonary well for water logging with excavation in any strata

upto four meter depth, filling the pit with B.T. Metal 40 mm in 0.80 mt.

44 depth with 25-40mm kapachi, 0.80 mt. depth and 0.50 mt. depth with coarse 2.00 0.00 0.00 JOB

sand & charcoal in layers including making P.V.C. line for water inlet etc. as

directed with 300mm dia bore 40 mt. depth and 200mm dia UPVC CM type

casing pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel packing

or as directed.

Providing and constructing filter chamber of size 1.50 x 1.50 x 1.50 mt. as

45 directed including connection rainwater pipes as per detailed as directed by 2.00 0.00 0.00 No

Engineer in charge including cost of labour and material.

Providing & supplying ISI mark P.V.C butterfly valves & Reflux valves of

following class and diameter including all taxes, insurance, transportation,

frieght charges, octroi, inspection charges, loading, unloading, conveyance to

departmental store.75 MM dia.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x15 mm having with water absorption less than

0.5% and conforming to IS:15622 of approved make in all colours and

47 shades in for outdoor floors such as footpath, court yard, multi modals 19.75 1832.99 1851.32 Smt

location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement :

coarse sand) in all shapes & patterns including grouting the joints with white

cement mixed with matching pigments etc. complete as per direction of

Engineer-in-Charge.

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure

PVC pipes of the following out side dia. Special density complete with

special flange compression type fitting,wall clips etc. including making good

the wall ceiling and floor.(G) 110 mm dia

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

49 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 60.80 1193.66 1205.60 Smt.

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

51 following type, erected on PVC / Metallic/Wooden box, single mounting 42.00 347.00 350.47 Pt.

base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed.(e) in existing pipe erected flushed on

wall/ceiling complete,Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

52 mounted and accessories with earth continuity of following type erected on 42.00 485.00 489.85 Pt.

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.(e)

in existing pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

53 box covered with appropriate front plate modules erected on / in wall / 14.00 361.00 364.61 Pt.

ceiling as per pipe erected with following type of accessories.[I] For 6A Plug

and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db

board(e) in existing pipe erected flushed on wall/ceiling complete,Cat. III

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

54 box covered with appropriate front plate modules erected on / in wall / 7.00 495.00 499.95 Pt.

ceiling as per pipe erected with following type of accessories.[II] For 16A

Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(e)

in existing pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessoriesCat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

56 Metallic/Wooden box, single mounting base frame covered with textured / 14.00 445.00 449.45 Pt.

metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

as directed.(e) in existing pipe erected flushed on wall/ceiling complete Cat-

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

57 metallic/white front plate , modules erected with necessary connections as 7.00 189.00 190.89 No.

per site situation directed by Engineer In charge.(10) 6/16Amp. Universal

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

58 metallic/white front plate , modules erected with necessary connections as 28.00 24.00 24.24 No.

per site situation directed by Engineer In charge.(7) Blank Plate

Single,Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

59 metallic/white front plate , modules erected with necessary connections as 3.00 152.00 153.52 No.

per site situation directed by Engineer In charge.(8) Computer RJ-45 socket

Providing and erecting ISI mark embossed Medium class RIGID PVC PIPES

(F.R.L.S.)of following size complete to be erected on/in wall or ceiling

60 erected with necessary PVC fittings & Junction boxes fixed with adhesive 350.00 23.00 23.23 Mtr.

solution & Clamps with following dia of pipes, in approved manner as

directed (a) 20 mm

Providing and erecting ISI mark embossed Medium class RIGID PVC PIPES

(F.R.L.S.) of following size complete to be erected on/in wall or ceiling

61 erected with necessary PVC fittings & Junction boxes fixed with adhesive 90.00 32.00 32.32 Mtr.

solution & Clamps with following dia of pipes, in approved manner as

directed (b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

62 coupling, PVC bushes, Check-nuts etc. complete of following sizes.(2) 25 6.00 20.00 20.20 Mtr.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(E) in existing pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size,(E) in existing pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

65 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC 120.00 82.00 82.82 Mtr.

insulated stranded wire of green colour for earth continuity of following

size,(E) in existing pipe,(a) 2 wire 4 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

66 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC 60.00 115.00 116.15 Mtr.

insulated stranded wire of green colour for earth continuity of following

size,(E) in existing pipe,(b) 2 wire 6 sq. mm

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

67 erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC 60.00 147.00 148.47 Mtr.

insulated stranded wire of green colour for earth continuity of following

size,(E) in existing pipe,(g) 4 wire 4 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if

required.(d) One wire 4.00 sq. mm

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if

required.(f) One wire 10.00 sq. mm

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

70 grade ISI marked copper wires of following size to be erected as directed.(e) 120.00 44.00 44.44 Mtr.

1.50 Sq.mm 3 core round PVC sheathed

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv

71 grade ISI marked copper wires of following size to be erected as directed.(c) 90.00 21.00 21.21 Mtr.

1.00 Sq.mm 2 core round/ flat PVC sheathed

Supplying & erecting approved make LAN cable of following size in existing

pipe as per direction,[C] CAT -

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

73 textured/metallic /white front plate,modules erected with necessary 4.00 1071.00 1081.71 No.

connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ,For Modular Type Accessories ,Cat. III

74 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 68.00 68.68 No.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

75 CCT 3000 K to 6500K, 36.00 293.00 295.93 No.

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

Tube Light with integral driver,(ii) 20 Watts, Surge - 2KV,IP-20,

conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder,(ii) 8 watts ,Cat-III

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

77 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED 6.00 4948.00 4997.48 No.

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity between the ranges shown.)(A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection.,(ii) 48 to 60 Watts,Cat-lll

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

78 system and having breaking capacity 10 KA to be erected in existing box. 10.00 268.00 270.68 No.

confirming to IS 8828/1996 with ISI Mark

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for lighting Load (B

80 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing 4.00 276.00 278.76 No.

box having following capacity (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity ,(A) 6 to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating One/Two

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

83 appropriate nos. of MCBs.(The DBs should be used of same company of 1.00 1141.00 1152.41 No.

MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door,(ii)8 way (IP-43)

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

84 appropriate nos. of MCBs.(The DBs should be used of same company of 1.00 1478.00 1492.78 No.

MCB to be used) suitable for (A) single phase incoming and horizontal

single phase outgoing (b) sheet steel double door,(ii)12 way (IP-43)

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase 240 V,50Hz. having characteristic

of quick action & tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as directed (i)

Amps.DP Cat-III

Providing & erecting Medium Voltage Danger Notice Board sticker as per

86 language suggested by engineer incharge of standard size as per IS-2551 2.40 26.00 26.26 No.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive

87 compound with high charge dissipation suitable for following type of 2.00 4546.00 4591.46 No.

applications with chamber and heavy duty cover.(approved make OEM has

to submit test certificate including value of earth resistane of installation.(a)

For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia

of 40 mm having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly conductive

88 compound with high charge dissipation suitable for following type of 2.00 5703.00 5760.03 No.

applications with chamber and heavy duty cover.(approved make OEM has

to submit test certificate including value of earth resistane of installation.[b]

For Electrical installation up to 11 KV located in other than normal soil

i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr

-Back filling Compound :1 no. Bag of 25 Kg

89 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 787.00 794.87 Kg.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms.

90 dia. galvanised iron pipe with coupling and buch buried in specially prepared 10.00 365.00 368.65 No.

earth pit complete with necessary 8 SWG earth wire.

91 For using salt and charcoal / coke as required for pipe type earthing 10.00 170.00 171.70 No.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables.(B) 4 core

ITEM SOR 2024- With 1% Estimated

DESCRIPTION OF ITEM QTY Per Unit

No. 25 LC Amount

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

93 accessories of same material at required depth in existing trench for laying 120.00 62.00 62.62 Mtr

of cable. below ground / road surface for enclosing cable (A)50 mm outer

Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II )with necessary connecting

94 accessories of same material at required depth in existing trench for laying 80.00 95.00 95.95 Mtr

of cable. below ground / road surface for enclosing cable (C)90 mm outer

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

95 1200 mm sweep complete having 3blades with aluminium blades with , 36.00 1929.00 1948.29 No.

canopy & 30 cm. down rod erected with earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Total Rs. .