SPECIAL REPAIR TO BLDG NO P 7 AND P 94 AND CERTAIN SANCTIONED WORKS AT AHMEDABAD CANTT

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M&L 75 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone agg as in sub base / path finishing the surface even and rough to receive floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick, (square or rectangular) area of each tile n. exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified.

All as per item No 4 above but on vertical surfaces incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cm 1:6 complete all as specified.

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, in verticles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and as directed.

M&L sand filling under floor /over floor or in foundations including well ramming complete all as specified and directed

M&L machine cut Kota stone slab 18 to 20 mm thick as in flooring or treades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L plain cement concrete 1:4:8 type D2 using 40mm graded stone agg as in foundation , filling and mass concrete complete all as specified and directed

Demolition of brick work built in cement mortar of any description including all quoins, arches pillars etc complete all as specified and directed.

M&L brickwork with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces mixed with water proofing compound incl chajja, facia etc, finished the surfaces even and smooth without using extra cement complete all as specified.( WPC shall be mesured and paid separetly)

M&L for applying two coats of cement base paint on new plastered surfaces of wall over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on old plastered surfaces over one coat of primer complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface etc, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over 3mm thick wall care putty (Birla white or equivalent) all as specifed.

M&L preparing newly plastered or unplastered surface of wall and applying three coats of white washing complete all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper over 3mm thk wall care putty (Birla white or equivalent) old plastered or un-plastered surfaces on walls complere all as specified and directed by Engr-in-Charge

M&L complete removal of existing treatment and applying two coat of white washing on wall surface complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.60mm thick of green colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl necessary rubber end closers in corrugations on external end supports complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating plain steel sheet 0.60mm thick of colour as approved by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl necessary rubber end closers in corrugations on external end supports complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site complete all as specified and directed.

Taking down chowkat with shutter n. exc. 1.5sqm each (without taking off shutter from the Frame) complete all as specified and directed.

Refixing shutter of any description but exc 1 sqm and n. exc. 2 sqm each in same opening etc complete all as specified and directed.

M&L pressed steel frames of size 125x60 mm for door with one or more rebates incl necessary fittings, lugs, hinges, lock strike plate, flat iron hold fast etc complete as specified & as directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in benching, copings, bed block for filing hollow space of steel chowkhats including necessary form work as required complete all as specified and directed.

S&F factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kilnseasonal and chemically pressure treated complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats complete all as specified and directed.

S & F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dove-tailed or welded complete including one coat of shop coat of primer complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete without glazing bars devotailed or welded complete including one coat of shop coat of primer complete all as specified and directed.

S&F steel ventilator with top hung shutter including projecting type hinges, 3mm thick 100mm long copper oxidized finish mild steel handle and 3mm thick 300mm long mild steel copper oxidized finish peg stay with applying one shop coat of red oxide zinc chromate primer before fixing complete as specified and as directed.

S&F 150 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

S&F in repair 25 mm dia stainless steel curtain rod fixed to wall with bracket & knobs complete.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C1 as in plinth protection/footpath using 20mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using, 20mm graded aggregate as in surface channel or drain complete all as specified.

Extra for forming fair finished drain as in channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilitate demolition complete all as specified and directed

M&L RCC 1:2:4 type B-1 (using 20 mm graded stone agg) as in seicmic and other similar bands, lintel,coping, bed block or similar work including necessary form work complete all as specified. Note:- Reinforcement shall be measured and paid separately.

S&F TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, quality conforming to IS 1786 - 1985 complete.

All as per item No 45 above but 8 mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/ slabs/ blankets, any thickness, including cover fillets

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., all as per manufacturers instructions and direction.

S&F Coloured textured designer ceiling board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E- 165)complete all as specified and directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F in repair vitreous china wash down water closet pan (pedestral pattern), white including connection trap and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair 15 mm bore angle cock with flange complete all as specified and direcrted.

S & F in repairs 600 mm long tubular towel rail of PTMT (minimum weight 190 gram) fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S& F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S& F in repair for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of tile exc 0.18 Sqm but n exc 0.38 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

All as per item No 64 above but on vertical surfaces including 10mm thick backing coat of tiles in CM (1:3) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified and as directed

S&F 0.56mm thick plain aluminium sheeting, Alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

M&L for machine cut kota stone slab size as in skirting, dado, vertical surfaces etc., 20-25mm thick, laid and jointed with grey cement sluirry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat of 15mm thick in CM (1:3) complete all as specified

S&F mild steel angle iron work as in door frames, conforming to Fe-410-W (Gde-E-250) quality A and complete all as specified

S & F MS for hand rails, half round or other steel section etc. wind ties for roof including securing bolts; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F in repair powder coated anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including jointing cleat, glazing clips, handles for fixing etc. complete all as specified

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm complete all as specified and directed.

S&F for powder coated decorative/fancy type curtain rails of 20mm dia, fixed in brackets, stops etc all as directed

S&F for powder coated decorative/fancy type curtain rails brackets, stops etc all as directed

M&L 50mm thick PCC of type B-0, 1:2:4 (12.5mm graded aggregate) for padding or laying floor finishes complete all as specified and directed.

M&L for pre polished chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set, jointed and pointed with grey cement and pigment in neat cement slurry in path including 20mm thick screed bed in cm 1:6 complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil including forming surface etc to required slope complete all as specified and directed.

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth in soft / loose soil for foundation etc n.exc 10 Sqm on plan and getting out completeall as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complte etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete.

Removing surplus excavated soil to a distance n.exc 50 Mt & depositing where directed at a level n.exc 1.5 Mt above the starting point complete.

M&L 40 mm thick PCC 1:2:4 type B 0 (using 12.5 mm graded agg) as in Damp proof course to horizontal or vertical surfaces including necessary form work mixed with water poofing compound @ 2% weight of cement complete all as specified and directed (Note:- Water proofing compound will be measured and paid separately)

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs,chajjas and similar work n. exc. 200 mm thick horizontal or sloppingin rough finished surface of concrete flat complete all as specified and directed.

M & L for use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in fair finished surfaces complete all as specified and directed.

M & L for providing reinforced cement concrete 1:1½:3 (Nominal Mix) type A-1, using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided for.

M&L for 5mm thick rendering in CM 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.

M&L Hard core of gauge n.exc 63mm deposited spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.11 Sqm but n exceeding 0 .18 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified

S&F 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend any radius including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend any radius including jointing with solvent cement complete all as specified and directed.

S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 500 ltrs capacity complete all as specified and directed

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. (Make : PRAYAG)/ Polytuf or equivalent.

S&F 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in floor complete all as specified and directed,

S&F 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in floor complete all as specified and directed,

M&L for precast cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in louvres and jallies 25 mm thicK (measured solid ) including all moulding set in cement mortar 1:4 complete all as specified and directed.

S&F PVC door/CB shutter 30 mm thick consisting of frame made out of MS tube for top and bottom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc all as specified and directed.

S & F factory made solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with prelam sheet as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S&F stainless steel butt hinges medium weight 100 mm long complete all as specified and directed

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.

S&F PTMT tubular towel rail of 'D 'type 60cm long between flanges complete all as specified and directed.

S&F Water Closet (squatt pattern) of vitreous china squatting pan of "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in cm and incl concrete complete all as specified and directed.

S & F polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 and making all connection complete all as specified and directed.

S & F vitreous china wash basin white, flat back, size 550 X 400 mm excluding taps, waste, chain and plug but including brackets, cutting for and pinning in as required complete all as specified and directed.

S&F pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

S & F 15 mm bore angle valve, brass chromium plated, complete all as specified and directed.

S&F 15mm bore PVC connection 450mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

M&L for Brickwork with subclass‘B’ bricks, straight or curved on plan exc 6m mean radius built in,cement mortar 1:4 complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20mm graded stone agg as in precast cover slab for main holes, drains, channels etc set in cement mortar 1:4 including necessary from work all as specified and directed

Supply & fix aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be not less than 1.5 mm thick section & shutter sec including cutting down existing glazed/gauge shutter complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

S & F of mild steel work framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks/water cooler/AC and similar work including hung as gates, including pintle hinges, stops, hand-made sliding bolts if any etc conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

Point wiring with 1100 volts grade PVC insulated FRLSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete.

S&F switch piano flush button single pole one way 6 amp complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F switch piano flush button single pole one way 16 amp complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F bell push, flush type, 6 amp 240 volts complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F door bell, AC, 240 volts, single pole complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed. Make : Havelles Reo / Anchor Penta /SSK / Cona.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed. Make : Havelles Reo / Anchor Penta /SSK / Cona.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x2.5 sqmm earth wire complete. Note : Three runs of cable shall be measured as one length.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN "BN 108C LED 20S PSU CDL WH" or equivalent in Wipro or GE Lighting as approved.

S&F LED fixture 8 watt including connection all as per Philips LED LINEA cat ref no. BN 550 WLED 6 - 6500 or eqivalent in Wipro or Havells as approved.

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Havells as approved.

S&F 20 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in powder coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make - Legrand cat ref no 607841 & 408592 or equivalent in Hager or Schneider as approved.

S&F tripple pole and neutral, powder coated, CRCA steel sheet MCB distribution board constructed as per IS 8623 suitable for MCCB incomer upto 160 amp, 4 way, 415 volts, degree of protection IP 43 - IK- 09 with metal door, recess mounted, having 200 amp insulated tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces etc as required.

S&F MCCB four pole, 125 amps, 16 KA thermally adjustable between 70 to 100% including 4 spreader link set of same make as that of MCCB for connection, required lugs etc complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanised earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

S&F Microprocessor based single phase 2 wire tamper proof electronic energy meter (Whole current) 10 - 60 amp, accuracy class 1.0 having optical communication port conforming to IS: 13779 housed in fully transparent TOP cover made of polycarbonate / high grade engineering plastic to permit clear view of display and indicator complete.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc cat ref No 675501 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F Modular switch one way 16 amp 1 module all as per Legrand Mylinc cat ref No 675511 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6/16 - 2/3 pin combined 2 module all as per Legrand Mylinc cat ref No 675555 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6 amp 2/3 pin combined 2 module all as per Legrand Mylinc cat ref No 675552 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref No 675530 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F MCB distribution board SPN, 240 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection earthing connection, blanking plates in unused spaces as required. Legrand cat ref No 607710 or equivalent in Hager or Schneider as approved.

S&F Power unit for AC or Geyser 3.5KW 4 module including sunken modular GI metal boxes not less than 1.2mm thick and white modular mounting plates with frame all as per Legrand Mylinc cat ref No 675558, 689009,675564 & 675584 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single Pole 6 to 32 amp. Make:- Legrand Dx3 cat ref No 408587 to 408595 or equivalent in Schneider or Hager as approved.

Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in Schneider or Hager as approved.

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK / CONA as approved

S&F Exhaust fan 300 mm sweep, with bird protector heavy duty motor, double ball bearings, 510 CMH,single phase, 1350 rpm, powder coated metalic finish blade 3 Nos, noise level 45-50 dB, 230V, 50 Watt, 50Hz, sturdy steel bird guard with louver shutter and mounting acessories including making openings for exhaust air through brick/PCC wall and making good by plastering, rendering, white washing etc around the wall openings complete all as directed. Make : Havells / Bajaj /Crompton as approved

Cutting existing steel tubing for alterations or aditions of pipe size 40/50 mm bore and screwing complete.

Supply and fix 50mm bore dia gun metal, globe valves, with iron wheel head,screwed both end for iron pipe and fixed complete all as directed.

Supply and fix 20mm bore dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade XLPE insulated and PVC sheathed steel tape / wire armoured solid aluminium conductor cable of nominal cross sectional area 10 sqmm 2 core complete. Make : Havells/ Polycab/Finolex

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 complete.

S&F steel tubes 40 mm bore light grade ISI marked in road crossing/along the pole etc complete.

SNEH TRADERS

ALBA AC AND REF SERVICES

Shreeganesh Construction

divyarsh entrprise