SPECIAL REPAIRS TO TOILET AND BATHROOM IN BLDG NO P-31/B AT LOKHART LINE, PROVISION OF MASTIC FLOORING IN STN LPG GODOWN AND PROVISION OF CERTAIN MINOR WORKS UNDER AGE B/R -I OF GE (WEST) BAREILLY.

Amount

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and single side prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of single side prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable side feathered edge beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.

S & F in repairs of factory made steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S & F of 100 mm long medium weight, Stainless steel Butt hinges with screws complete all as specified and directed.

S & F of 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F of 250 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F of 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed.

S & F of galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed.

S & F of Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M & L for providing 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed.

M & L for providing plain cement concrete type B-1, 1:2:4, (using 20 mm graded stone aggregate), as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M & L for use and waste of form work to chullah hoods, chajjas, troughs and similar items including edges in rough finished surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in chajjas and the like complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 including demolition of old brick work complete all specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement with and including taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:4 including mixing of water proofing compound as per manufacturer’s instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with and including taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.

M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair with and including taking down existing ceiling plaster complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified.

M & L for glazed ceramic coloured printed tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles including dismantling of wall tile with Cement Mortar bedding complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tile including Cement Mortar bedding complete all as specified and directed.

S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors with and including taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors with and including taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed.

S & F in repair vitreous china urinals, bowl type (flat back or corner wall type) 465 X 355 X 265 mm white (minimum) with grating and union for discharge pipe but excluding flushing cistern, flush pipe etc. complete all as specified and directed.

S & F in repairs 10 litres PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.

S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repairs 15 mm bore fancy type, chromium plated stop valve/angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin flat back, size 550x400mm including cutting for and pinning ends of brackets including PTMT waste coupling and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed.

S & F in repairs fancy type glass corner 300 mm radius made of 10 mm thick toughened glass with railing, fixed with fancy type screws complete all as specified and directed.

S & F in repairs 32 mm dia and 1.00 metre long PVC waste pipe suitable for WHB and urinal complete all as specified and directed.

S & F in repairs 15 mm bore fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair Chromium plated wall mixer with connection for shower arrangement complete all as specified and directed.

S & F in repairs 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 125 mm size brass chromium plated shower rose with or without swivel joint including fixing to steel pipe or union complete all as specified and directed.

S & F in repairs 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including dismantling of old existing one complete all as specified and directed.

M & L in repairs for 75 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position complete all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S & F of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand and dismantling of old unserviceable one complete all as specified and directed.

M & L for preparing existing concrete floor surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bituminous primer at the rate of 5 kg per 10 Sqm complete all as specified and directed.

M & L for 30 mm thick (consolidated thickness) bituminous premix mastic floor made from bitumen 90/15 grade, coarse aggregate, lime powder, stone dust, rammed and compacted with 1 tonne hand roller, duly mixed in mechanical hot mixed plant and premixed material complete all as specified and directed.

M & L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Removing surplus demolished material to distance exc. 50 m but not exc. 250 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 Sqm each including iron mongries, hold fast etc including refixing the same and making good the disturbed portions of walls in Cement Mortar 1:4 complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance exc. 250 m but not exc. 500 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

S & F of factory made steel window or ventilator fixed type with glazing bars complete all as specified and directed.

S & F of Sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND WILL BE MEASURED AND PAID SEPARATELY.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:4 including mixing of water proofing compound as per manufacturer’s instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.

M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling with cement mortar 1:4 finished even and fair complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for glazed ceramic coloured printed tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.

S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf per Sqcm and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S & F of Vitreous China water closet Pedestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630x450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed.

S & F of 15-18 mm thick Z-black granite (of any type) work (table rubbed and polished) in floor, steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including dismantling of old existing one complete all as specified and directed.

S & F of vitreous china urinals, bowl type (flat back or corner wall type) 465 X 355 X 265 mm white (minimum) with grating and union for discharge pipe but excluding flushing cistern, flush pipe etc. complete all as specified and directed.

S & F of 10 litres PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32 mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed.

S & F of 15 mm bore fancy type, chromium plated stop valve/angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F of chromium plated brass wall mixer 3 in 1, 15 mm for mixing hot & cold water screwd down three joints to steel pipe or unions and plugging and screwed to wall complete all as specified and directed.

S & F of vitreous china table / counter top wash basin of suitable size including SS bottle trap, HDPE waste pipe including fixing on counter with SS waste coupling complete all as specified and as directed.

S & F of fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed.

S & F of fancy type glass corner 300 mm radius made of 10 mm thick toughned glass with railing, fixed with fancy type screws complete all as specified and directed.

S & F of 32 mm dia and 1.00 metre long PVC waste pipe suitable for WHB and urinal complete all as specified and directed.

S & F of 15 mm bore fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F of 125 mm size brass chromium plated shower rose with or without swivel joint including fixing to steel pipe or union complete all as specified and directed.

S & F of 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F of 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for 75 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

M & L for 150 mm bore salt glazed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.

M & L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M & L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.

M & L for providing polymer based waterproofing membrane (Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD manufactured by STP TEXAS Ltd, Hyperplas manufactured by IWL Ltd) minimum weighing 3.50 Kg per sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 Grams per sqm) laid by forced torch application having minimum 10 cm end laps both ways, over and including polymeric primer @ 0.30 Litre per sqm, polymeric modified bitumen @ 1.20 Kg per square metre after cleaning of roof surface and applying two coats of Aluminium paint @ 200 Gram per Sqm, on APP membrane complete all as specified and directed.

M & L for precast PCC kerb stone machine pressed factory made of size 300 mm long, 150 mm thick and 450 mm high made of PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate), set in cement mortar 1:4 including forming weathering, slightly rounded or chamfered angles and throating as directed with and including necessary excavation & earthwork as required complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of kerb stones and applying two coats of glossy finish paints for day and night visibility with different color combination black/white or yellow/black as directed over one coat of primer complete all as specified and directed.

M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rubber moulded 80 mm thick, M-40 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand complete all as specified and directed.

S & F of powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter with and including 5.50 mm thick tinted glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as detailed below: - (i) Window frame- 68.4 mm x 38 mm x 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter- 15 x 37.5 x 1.15 mm thick and over. (iii) Aluminium beading- 0.7 mm thick. (iv) Aluminium grill with bulb height 4.5 mm square / rectangular / hexagonal shaped fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed. (v) Stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40 mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples. (vi) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size. (vii) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F powder coated aluminium sliding CB frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on two tracks with glazing shutter and including 5.50 mm thick tinted glass with neoprene rubber gasket with aluminium beading, clips, frame made with aluminium section as appended below, and following items deemed to include- (i) Window frame: 68.4 x 38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick. (iv) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S & F of anodised Aluminium Openable door shutters (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing, anodized aluminium beading, screws etc. and prelaminated particle board (Novapan) panel and making good of wall surface to match existing surface complete all as specified and directed comprising of the following aluminium anodised sections and aluminium anodised fitting:- (a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thick. (b) Lock rail of section- 83.50 x 44.45 x 1.70 mm thick. (c) Stiles of section- 85 X 44.45mm X 1.40mm thick including 2 handles, hinges etc. as required.

S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.

S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 Kg per running metre including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel complete all as specified and directed.

S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square exc. 0.5 sqm in each pane complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

S & F of solid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing given on MES schedule Part – II (2020) complete all as specified and directed.

M & L for vitrified ceramic coloured tiles (light shade) 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tile including Cement Mortar bedding complete all as specified and directed.

M & L for vitrified ceramic coloured tiles (light shade) 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles including dismantling of wall tile with Cement Mortar bedding complete all as specified and directed.

S & F of 4 mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in lintels upto 1.50 m span and the like complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-290 Grade E-165 complete all as specified and directed.

Excavation over areas not exc. 1.50 m deep and getting out in soft / loose soil complete all as specified and directed.

M & L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down carefully aluminium / copper point wiring (light point, fan point, socket outlet point or power point) any type (batten, casing-N-caping, surface conduit or concealed conduit) complete with and including fittings and fixtures such as switches, ceiling rose, pendent, lamp holder, regulator, switch, socket outlet, shade conical etc. and making good disturbed surfaces of walls etc. as per existing finishes by plastering, repairs and distemper / white wash / colour wash etc. complete all as specified and directed.

M & L for point wiring for one light point / fan point (Independent point), controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (FRLS) drawn into and including non-metallic PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or 1.2 mm thick pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded copper conductor cable (FRLS) as in earth wire and connecting all metal parts to common earth dolly complete all as specified and directed.

All as per item No. 139.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the independent board complete all as specified and directed.

All as per item No. 139.00 hereinbefore but wiring for one 3 / 5 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.

All as per item No. 139.00 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 4.00 sqmm size cables complete all as specified and directed.

All as per item No. 139.00 hereinbefore but wiring for one 3 / 6 pin 15 Ampere socket outlet point on independent board and wiring using with 2.50 sqmm size cables complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 5 Ampere complete all as specified and directed.

S & F of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S & F of switch piano flush button single pole 230 volts, one-way 15 Ampere complete all as specified and directed.

S & F of ceiling rose PVC/ polycarbonate isolated body 3 terminal, 230 volts AC ISI marked, complete all as specified and directed.

S & F of flush mounting factory made SPN DB's Double door, 4 way, IP-42 Protection, detachable gland plates for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

S & F of MCB single pole, 240 volts, 6 to 32 Ampere breaking capacity 10 KA, ‘B’ Series complete all as specified and directed.

S & F of MCB single pole and neutral, 240 volts, 32 to 40 Ampere breaking capacity 10 KA, ‘B’ Series complete all as specified and directed.

S & F of MCB single pole and neutral, 240 volts, 63 Ampere breaking capacity 10 KA, ‘B’ Series complete all as specified and directed.

S & F as in replacement surface mounting LED light fitting aluminium extruded T-5 batten, 20 Watt, 4 feet long including making electric connection with 23/0.0076 size three core PVC flexible cable complete all as specified and directed.

S & F of Lamp holders PVC /polycarbonate insulated body modular type with back plate suitable for batten fitting/angle fitting with and including 7 watt capacity LED lamp complete all as specified and directed.

Taking out old unserviceable earthing any type and M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed.

Supply and laying XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor 1100 volt grade, laid in trenches/ducts, fixed on wall/inside panel, drawn through pipe of cross sectional area 10 Sqmm 2 core with and including taking out old unserviceable one complete all as specified and directed.

M&L for sand cushioning with layer of sand 8 cm thick before lying of cable and 15 cm after lying of cable in trenches, punning complete all as specified and directed. Note:- Punning thickness of 18 cm will be considered for payment.

M & L for laying brick as in protection covers over cables using sub class 'B' old size bricks laid flat, length wise perpendicular to the axis of cable complete all as specified and directed.

S & F as in replacement LED light of 1 x 10 watt T-5 Lamp type with electronic ballast of suitable capacity, clear acrylic cover including mounting on wall complete all as specified and directed.

S & F of 1100 volts grade heavy duty 10.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 25 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 10.00 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.

S & F of 1100 volts grade heavy duty 6.00 Sqmm size two single core PVC insulated (FRLS) copper multi-stranded conductor cable as in sub main wiring, drawn into & including PVC conduit medium grade not less than 20 mm dia including its all accessories & fittings, fixed concealed with and including chase cutting and making good the same as per existing specifications along with a continuous run of 6.00 Sqmm size stranded copper conductor PVC insulated (FRLS) (green colour) cable as earth wire complete all as specified and directed. NOTE: - TWO SINGLE CORE CABLES ALONG WITH EARTH WIRE AND PVC CONDUIT SHALL BE MEASURED AS ONE UNIT LENGTH.

Supply and fixing of 300 mm sweep exhaust fan, mild steel body, AC single Phase, 230 Volts, alongwith blades, frame, louvers and all fixing arrangement including making suitable size hole on brick wall etc. as required at site complete all as specified and directed.

Supply and fixing of 25 Litres capacity electric water heater, storage type mild steel body with copper inner tank, heating element upto 2 KW capacity, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc. including all inlet, outlet connection, stop cock, PVC connections as required at site to make the geyser smooth functional complete all as specified and directed.

Supply, laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm 2 core as in service connection complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth lead 4 mm dia all as shown on electrical plate No. 3 of MES schedule 2009, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel TMT bars @ 150 mm both ways centre to centre with suitable lifting handle to cover, earth pit of PCC 1:2:4 type B-1, GI protection pipe light grade 15 mm bore including testing on completion of job complete all as specified and directed.

Supply and fixing of LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 volts, AC recessed type with high efficiency PMMA diffuser soft glare free light along with driver, holders and LED lamps suitable for ceiling including connecting upto driver with three core 1.50 Sqmm size flexible copper conductor cable complete all as specified and directed.

S & F of single pole AC modular box with a top and earth plug and socket including one single pole MCB of 20 Ampere capacity suitable for connection of AC complete all as specified and directed.

Supply and fixing of 400 mm sweep wall mounting fan with all fittings and oscillating mechanism 220 volts, single phase, 50 Hz complete all as specified and directed.

S & F of flush mounting factory made SPN DB's Double door, 8 way, IP-42 Protection, detachable gland plates for MCB fitted with bus bar, earth bar and neutral links complete all as specified and directed.

Supply, installation, commissioning and testing of hi wall split units indoor/outdoor complete with cordless remote control unit and within built Heating and Cooling arrangement and Digital Inverter twin rotary of capacity 1.5 TR single phase 240 volt, 50 Hz complete all as specified and directed. Make- Blue Star, LG, Carrier, Daikin.

Supply and fix of 4 KVA capacity voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 130 volt to 250 volts with output voltage stabilized at 230 volts accuracy of ± 2.5% complete all as specified and directed. MAKE- BLUEBIRD, SINETRAC, V-Guard.

S & F of anodised Aluminium Openable door shutters (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing, anodized aluminium beading, screws etc. and aluminium grill with bulb height 4.5 mm square / rectangular / hexagonal shaped fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed and making good of wall surface to match existing surface complete all as specified and directed comprising of the following aluminium anodised sections and aluminium anodised fitting:- (a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thick. (b) Lock rail of section- 53.50 x 44.45 x 1.70 mm thick. (c) Stiles of section- 85 X 44.45mm X 1.40mm thick including 2 handles, hinges etc. as required.

M & L for rendering 15 mm thick on other than fair faces of brick work in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough and dismantling of floor tile including Cement Mortar bedding complete all as specified and directed.

S & F of 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn laid in trenches complete all as specified and directed.

S & F of 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar 1:1 with spun yarn fixed to walls complete all as specified and directed.

NOTE- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

Goel Enterprises

SANJEEV ENTERPRISES

Jain construction co

Mohit Enterprises

hardeep singh enterprises

novell engineers

Harsha Consultant and Builders

M/S Gupta Builders