Loading
Loading…
Loading…
Tender Value
₹46.1 Cr
EMD Value
₹46.1 L
Closing Date
14 Aug 2026, 11:00 pm
Karnataka Neeravari Nigam Limited
MOHAMMED MUSTAFA S H
08332286223
7829867004
Survey, Investigation, Design, Supply, Installation, Testing and Commissioning of Lift Irrigation Scheme (Head Works consisting of construction of Intake Canal, Jack well cum pump house, Vertical Turbine pumps coupled to HT Motors, Power supply including terminal bay, 33/6.6 KV Electrical Sub Station, Transmission line) for augmenting suffering achkat of 9139 Ha pertains to Chikkud Branch canal in Raibag Taluk of Belagavi District by lifting water from Krishna River including operation and maintenance for a period of 5 years after successful completion of works for Sri Karesiddeshwara lift irrigation scheme on Turnkey Basis. (PHASE -I)
KNNL/2026-27/LI/WORK_INDENT4667
KNNL/2026-27/LI/WORK_INDENT4667
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
KNNL Division GLBC Div No 1 Ghataprabha
13 documents required · 13 mandatory
To qualify for award of this contract, each tenderer (either individual or JV Partner) in his / her name should have in the last five years (2021-22 to 2025-26) period.Satisfactorily completed (at least 90% of contract value of ongoing works) as a prime contractor, at least one similar work costing not less than Rs. 27.20Crores (usually not less than 50% of the amount put to tender under this contract). Work done certificate issued by an officer not below the rank of Executive Engineer of the concerned Division and Countersigned by the Superintending Engineer of the concerned circle is to be uploaded for the technical bid. The cost of completed works of the previous year shall be given a weightage of 10% per year to bring it to the price level of financial year in which tenders are invited.Note-: 1) Similar work comprises of Survey, Investigation, Design, Supply and construction of Lift irrigation scheme/ tank filling scheme involving Jack well cum pump house, fore bay, Intake, Electro-mechanical & Electrical work includes transmission line, Bay and Sub Station etc.,
The intending bidder can submit bids as an Individual bidder along with Tie up of pump manufacturer. The Tie up is to be formed prior to the bidding. In case of Joint Venture bidding, the lead partner should have at least 51% partnership.Tenders from a Tie-up proposed in this bid, the bidder shall upload an agreement with only one pump manufacturer on Rs 500-00 stamp paper in the prescribed format which shall be concluded prior to bidding and enclosed to the bid document. For proof of the Tie up, in the technical bid, the prescribed format under section 2 - instruction to tenderer (ITT) shall be followed. (Multiple tie-ups are not allowed)
The intending Bidder (Individual/JV)/Tie-up partner Should have supplied and successfully commissioned at least 4 numbers of VT pumps with a capacity (flow rate) not less than 1.029 Cumecs for each pump with a head not less than 78.0 mtrs for each pump during the last 5 years (i.e., from 2021-22 to 2025-26). The necessary work done certificate issued by an officer not below the rank of Executive Engineer and countersigned by the Superintending Engineer of the same circle should be uploaded.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 Executed in any one year, (for a continuous period of 12 months) the following minimum quantities of work. 1. Earthwork (both in Excavation & Embankment)-35453Cum,2.Cement Concrete (including RCC & PSC)-3244 Cum, 3.Reinforcement steel-455 MT
Each Tenderer should further demonstrate:(a) Availability by owning at least 50% of the required / specified key and critical equipment for this work and (b) the remaining 50% can be deployed on lease / hire basis for all the works provided, the relevant documents (commitment agreements etc.) for availability for this work are to be furnished. Excavators -2(own)&2(Hire), Tippers-2(own)&2(Hire), RMC Plant-1(own)&1(Hire), Transit Mixer-2(own)&2(Hire), Vibrators-1(own)&1(Hire)
To qualify for award of this contract, each tenderer (either individual or JV Partner) in his / her name should have in the last five years (2021-22 to 2025-26) period.Achieved in at least two financial years a minimum financial turn over (in all classes of civil engineering works only) of Rs. 72.52 Crores. Audited profit and loss account certified by a practicing Chartered Accountant along with the copy of income tax returns filed for the years indicated above should be furnished. Duly mentioning UDIN on Turnover certificate (from CA).(The annual turnover of previous year shall be updated to the year of tender invitation at 10% per annum). In case of JV all the partners combined satisfy the annual turnover. However, the lead partner should have at least 51% of the Turnover in any of the two years during the last five years. The qualification criteria can be satisfied by individually (adding collectively the credentials of all JV partners). All the partners should have achieved at least 25% of prescribed annual turnover (Qualification criteria).
Liquid asset and/or availability of credit facilities of not less than Rs. 13.50 Crores (unconditional credit lines/letters of credits/certificates from nationalized banks) for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period). The contractor should upload necessary documents issued by the nationalized banks as per prescribed format enclosed as Annexure Further the agency has to furnish the above credit facilities for the entire work period as per tender
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (A x N x 1.5 - B)Where A- Maximum value of civil engineering works executed in any one year during the last five years (Updated to FY 2025-26 price level) taking into account the completed a well as works in progress. N - Number of years prescribed for completion of the works for which Tenders are invited. B -Value, at FY in which the tenders are invited price level, of existing commitments and on-going works to be completed during the next 2026-27 years. If a bidder participates in more than one bid and technically qualifies and subsequently becomes lowest in more number of bids than his/her bid capacity, then the tenderer can give his option to select the works based on his/her preference equivalent to his bid capacity. Further for the balance bids next lowest bidders will be eligible to accept at lowest bidders rates equivalent to their bid capacity provided if the competent authority accepts it. Note- The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.
₹7,500
₹46.1 L
15 Jul 2026
15 Jul 2026
17 Aug 2026
12 Aug 2026
31 Jul 2026
Prelimnary Works
Survey, Investigation and Detailed Engineering of Lift Scheme consisting of Electromechanical, Electrical works, Intake channel, Jackwell cum Pump House, Raising Main including structures, Delivery C...
Construction of Intake canal
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations ...
Providing and constructing uncoursed rubble stone masonry in CM 1:5 proportion by volume for canal side lining using stones and stone chips including cost of all materials, machinery, labour, batching...
Providing and laying insitu vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...
Providing and laying insitu vibrated M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour,cl...
Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete. 20 mm thick 100 mm d...
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Providing and forming 350x 350 x 400 mm deep filter drain consisting of 75 mm thick 10 mm down coarse aggregate layer around pressure relief pipe and 75 mm thick sand layer around coarse aggregate lay...
Kilometre Stone : Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (ii) Ordinary kilometere stone precas...
Kilometre Stone : Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone
Boundary pillar / Guard Stone : Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding finishing and ...
Steel fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...
Construction of Transition or Forebay connecting from intake to Jackwell
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Construction of Pump house cum jack well for housing 4 working PLUS 1 stand by VT pumps, miscellaneous works such as Security Room, Bore well and other basic ammenities
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...
Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm 0.05PERC total coated thickness, Zinc coating 120 g/Sqm as per IS 277, in 240 mpa steel grade 5-7 microns epoxy prim...
Flashings/Aprons
North light curves
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required s...
Finishing walls with water proofing cement paint of required shade : New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Steel door ( frame CRCA sheet Shutter tubular sections )
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
MASONRY WORKS : Providing and fixing acid resistant tiles of approved quality for battery room flooring / dadooing set over a bed of 20 mm thick CM 1 : 3
proportion by volume including cost of all mat...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Tubular Steel Railing on Medium Weight Steel Channel (ISMC series) 100 mm x 50 mm : Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (...
BACK FILLING & OTHER WORKS : Providing rubble / boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary o...
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
Turbo Ventilator:Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not less than 6kg for Industrial use for area upto 100m2 for Industrial use
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granit...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded ...
Providing, fabricating, assembling and fixing in position aluminum partitions Using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 1...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc...
Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With ...
Steel S type office chair : Teak wood handle. Chair using 16g round pipe and 18 g sheet / perforrated sheet with Arm.
Office Table: Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telescop...
Precast compund wall: Providing and fixing factory made M20 Grade Cement Concrete Precast Boundary Compound Wall of Size 2100mm (L) x 300 mm (B) x 50mm (D) with Panel weight approximately 77kg and pan...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends,junction box,elbows,screws at an interval of 300 mm as required.-20mm
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm(Phase & Neutral)&1x1.0sqmm(Earth wire)FRLS multistrand PVC insulated copper wire(confirming to IS694:an...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6A One Way Switch
6A Two Way Switch
Stepped Fan Regulator Two Module
6/16A Universal Socket
Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc,for operation on 230V,50cycles.Single phase AC supply conforming to IS -374-1979 and with double ball bearing sy...
Supplying of-PVC Batten with integrated LED tube LED light fitting 1 x 4' - 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI80.Power Input:220 240V@...
Lumpsum for Power Connections
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
Borewell depth of 50 to 100 Mtrs
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x4 Sq...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments-50mm
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets
Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.
Construction of Approach road for jack well cum Pump house
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...
Prime Coat ( Low porosity ) Providing, and applying primer coat with bitumen emulsion (SS - 1) on prepared surface of granular base including celaning of road surface and spraying primer at the rate o...
Providing and applying tack coat with Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Tack coat on B...
Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weigh...
Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumino...
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting (Boundary pillar)
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, f ii) Ordinary Kilometer stone (precast)
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Design, supply, installation and commissioning of pumping machinery and pump house electrical works. 5 Nos (4 working & 1 stand by) vertical turbine pumps of capacity 2210 HP at jack well cum pump house.
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS1710 having specified pump output under specified ...
Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...
Additional VCB including sheet metal enclosure, extension bus bars, metering and relays complete for each additional pump for moumting on common panel board
Providing Ductile Iron Push on special conforming to IS: 9523:2000 - All DI PN :16.0 Dismantling Joints
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console and all other ancillary operations complete for use alo...
DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete a...
Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications.
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...
Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump.
Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...
Supplying, laying and connecting xLP 6.6 KV E 3 core cable suitable for 28 KA short circuit rating with end connectors from transformer to HT panel etc. complete as per directions 400 Sqmm
Supplying, laying and connecting xLP 6.6 KV E 3 core cable suitable for 28 KA short circuit rating with end connectors from HT panel to motor, starters, capacitors, panels etc. complete as per directi...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape / reg...
Design, fabrication, supply, erection, testing and commissioning of sliding type stoplog gate consisting of skin plate, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, stif...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screenS ) with all accessories for pump house intake structu...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
Design, fabrication, supply, erection and commissioning of electrically operated mono-rail hoist assembly consisting of electric motor, rope drum, gear system, wire rope with lifting attachment, festo...
Design, fabrication, supply, erection and commissioning of structural steel hoist supporting structure consisting of columns, cross beams, bracings, stiffeners, mono-rail with fixtures with all access...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
Design, fabrication, supply, assembling, testing and commissioning of Remote control panel made of sheet metal in desk type configuration duly painted with recess for cable entries at the bottom equip...
Providing pressure relief valve for manifold pipe of PN : 16 : supplyong, fixing and commissioning pressure relief valve of approved, make body and sheet ring of bronze, class conforming to IS: 14845,...
Supplying, installing, testing and comissioning pumphouse lighting insidse and outside including small power with D board, wiring, lighting pictures, earthing complete, including transformer centre.
Estimate for construction of 2x 8.5MVA,33/6.6KV Sub Station with Metering Bay at Karisiddeshwar LIS
a) POWER TRANSFORMER :(HV side and LV side cable type) Power Transformer Copper winding, 8.5 MVA, 33/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with OLTC, RTCC panel, etc, complete fil...
b)160 KVA Aux Copper windindTR, 6.6KV/433V Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with off load tapchanger complete etc,as per IS 1180 Level-01 including erection and testing and comissio...
33 kV, 25 kA class, VCB Breaker with terminal connector suitable for Al. tube/conductor with spring operating mechanism and mounting structure etc., as per technical specification.
a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., complete as per tec...
b)Upright with out Earth Switch (Live Point Height
a)Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-1-1 A (3...
b)Oil filled neutral Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-...
Oil filled voltage Transformer 0.2 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class :33 kV/sqrt3, 110 V/sqr...
30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2
a)33 kV Sub-station Control and Relay panel: Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for line
b) 33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for for Transformer (There is no SR rates for 33/6.6 Kv transformer C&R panal hence low...
Supply , Erection of Station Structures and Mounting Structures:
i) Station structures Tower - 3T1 with peak (0.365 MT per structure*6) including cost of all material, machinery, labour, transportati...
ii)3B1 (6M Width) (0.194 MT per structure*3) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by Engineer-In-Charge.
Supply, Erection of Isolator Mounting Structures a) 33 kV Isolators ai) Live point height 3750 mm Note: Three numbers of flexible terminal connectors per Isolators suitable for 63mm Aluminium tube(0...
Supply, Erection of Isolator Mounting Structures
b) Live point height 3750 mm (0.25*4 MT per structure) Including cost of all material, machinery, labour, transportation, taxes with all leads and li...
Supply, Erection of CT/NCT Mounting Structures
c) Current Transformers for 33 kV CTs / NCT (0.152 MT per structure*14) Including cost of all material, machinery, labour, transportation, taxes with al...
Supply, Erection of PT Mounting Structures
d) VoltageTransformers for 33 kV PTs (0.152 MT per structure*6) Including cost of all material, machinery, labour, transportation, taxes with all leads an...
e)Supply, Erection of LA/PI Mounting Structures of LA//PI(0.075*15 MT) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
f) GI Nut and bolts for the above structures ( 8.19 *5%)
Supply , Erection of 7/ 3.65mm GI wire for Ground conductor, 33 kV Side including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
ACSR Conductor LYNX ACSR 33 KV Side
Formation of Main/Cross bus with single LYNX (Only erection portion) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by...
Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour,...
Supply, Erection of Insulators : 90KN polymer long rod along with Tension lamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, transportation, ...
Supply and fixing C type wedge /Terminal connector/ST/PI/GOS Pad clamps suitable for LYNX to Coyote Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts e...
Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts et...
ii).4 Core x 6 Sq.mm
iv).4 Core 2.5 Sq.mm
v).2 Core 2.5 Sq.mm
Battery Set & charger: a)Supplying of palnte type and Installing, assembling, filling of acid, wiring, assisting, test-charging and discharging Battery set of 110 V, 100 AH.
b)Supplying and Installing, assembling, Battery charger of 2x110 V, 100 AH. 2 No. of flot cum boost15A, including control panels, changeover arrangements etc.. With 2 separate DC distribution panels
Site Surfacing Jelly spreading : Levelling of station land & Providing and spreading 20/25 mm jelly in station yard including conveying, stacking for measurement, spreading in layer of 100 mm over all...
a) MSFlats 50x6mm for earth connection:Earth mat formation as oer the KPTCL R&D design welding and applying ACB paints( inclusive of all T&P and consumables) including cost of all material, machine...
b) GI Flats 50x6mm for earth connection: Grounding of equipment with 50x6mm G.I flat and connecting equipment to the earth mat/ground pit each point of Earthing with all formation works like bending t...
Supplying and laying of MS 32 mm dia round rods welding and applying ACB paint at welded portion
c) Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part clamp out of G.I.fl...
d) Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non pressure type) for earth pits. Including cost of all material, machinery, labour, transportation, taxes with all lead...
HESCOM Metering panel (Main and check meter)struss etc for meter box (Including Sheete roofing)
i)DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
ii)LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos. 3...
Maintenance Tools and Plant A).Ring spanner set
B).Pipe wrench 24 inches size
C).Pipe wrench 18 inches size
D).Double end spanner- 12 nos. per set
E).Hack saw frame B185
F).Hydraulic crimping tools upto 1000 sqmm
G).Rubber hand gloves 15 kV tested
H).Rechargeable 5 W LED Hand Torch
I).Insulated cutting plier 12 inch size
J).Insulated cutting plier 8 inch size
K).Line live tester AC/ DC 500 V
L).screw driver 18 inch
M).screw driver 12 inch
N).Hammer 8 lbs
O).Hammer 2 lbs
P) Grouding sticks exteble upto 18 feet 3 nos of each 6 feet sticks of 3 phase R-Y-B (3 No one set)
Rubber mats 1000mm X 2000mm X 12mm size suitable for 15kV class
Fire Fighting Equipments with necessary mounting Stands: A).Foam type extinguisher i.50 Litre capacity
ii.9 Litre capacity
B). Water Type (Gas Pressure Type) 9.0 Liters
C). Carbon Dioxide Type, 4.5 Kg capacity
D). Sand Type i.G.I.Bucket 9 Ltr.capacity
ii.Steel Stands
Yard lighting a)Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening...
b)Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fitt...
c)Supply of 120 W LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moul...
CIVIL WORK a)Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
b)Providing and laying in position Cement Concrete1:3:6 for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
c)Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, gradedaggregates for well steining including cost of all materials, machinery, labour,cleaning...
d)Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tyin...
e)Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification
Security fencing to Electrical Sub Station with RCC poll and chain link mesh. a)Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates mak...
b)Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dire...
Transformer foundation and associated rail track: 66/6.6KV Transformer( for 8.5MVA Transformer)
Design, Engineering, supply of labour, material, equipments and construction of transformer and radi...
Auxiliary Transformer Platform:
Construction of size stone masonry Transformer platform for 250KVA,11kV/0.433V LT Transformer as per drawing enclosed, technical specifications and directions of the ...
Road Works: Design and construction of roads with suitable gradient and walkways / shoulders within substation as per specification, layout and sectional detail drawing etc., complete in all respect. ...
Cable Trenches including Road Crossing:
Engineering and Construction of RCC (grade M-20),type cable trenches, pipe trenches of required depths including cost of excavation, back filling and disposal ...
Providing and fixing gate:- Providing and fixing gate as per approved drawing, technical specification and directions of engineer incharge of work including RCC supports with all items not mentioned...
Baffle Wall: Design and construction of Baffle wall in between Power transformer.
Estimate for construction of 33KV Transmission Line from HESCOM 33/11KV S/S,Shiragur to the proposed Karisiddeshwar LIS
RCC Pole - 9.5 Mtr Long, 350 Kg WLfor33kVLines) (Common SR Volume-VI, 2023-24, P- M-3of81- Sl-no-8- Itm-No : 1.08 & P-L- 44of 81, SLN-31-I No-2- 2.03) (132+10NS IBEAM+ poles for DP 10 N0 + TP 6 No.s)
RCC Pole - 9Mtr Long, 145 Kg WLfor stud) including material,labour ,erection,excavation,fixing
Pre tressed spun pole 11mtr long 500kg WL/I-Beam 11mt long (200x100MM) ISLB-200X100=19.8Mtr/KG =217.8KG-RS 68/KG
DP Set (2RCC Pole Strucrure Kit except pole
TPSet (3 RCC Pole Strucrure Kit) including 5 Kg, 8 SWG GI Wire for Structure Grounding
a) 33 KV V-shape /Horizontal cross arms/ Httopsupport,bolts, nuts & washers
Clamp 9.5M RCC Pole for 33kV
A)33kV Polymer Pin Insulator with pin
B)33kV 70 KN Polymer Insulator (Ball & socket type)
C) C-Type edge connectors for Coyte toCoyote ACSR
LT 2 Pin cross arms, with pole clamps, bolts, nuts (for RCC poles)
Guy set with (5kg guy wire+Guy clamp1+-Turn buckle-2+ancker rod-1+fish plate-2+strain 15no+2ns
Providing guarding between HT & LT line up to a Span of 40 Mtr(Guy wire5.14kg+clamp2ns+ 2ns special crossarm
Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt : 521 kgs/km
a) Single Tension Clamps for Coyote ACSR
b) Repair sleeve joints for Coyote ACSR Conductor
c) MSC joints for Coyote ACSR Conductor
a) Spiral Earth Electrode for RCC/I-Beam poles with No 8 SWG Earth wire for earth connection 16 mm nuts excluding charcoal and salt.
b)GI grounding pipe-B-class-42mm dia,2.5mtr long-3.2mm thick with GI strips and washer complete minimum wt of pipe should be 7.3kg, well burnt good qlty charcoal 30kgs and good qlty salt 50kg with gu...
a) Danger board with clamps, bolts nuts for fixing single pole and for DP Sructure as per drawing
b) Number Plates with pole clamps, bolts nuts for fixing single pole
c) Suppling and fixing of barbed wire to poles (2mtr/pole)
Digging of pit a)Digging of 158+8 pits1.8mtr depth for erection of pole/Ibeam or spun pole (ordinary soil)
b)Digging of 50 pits for GUY sets (ordinary soil)
c) Digging of 13ns pits for providing GI pipes (ordinary soil)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Pole concreting : -Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m he...
Guy concreting - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m heig...
a)Supplying and painting of two coats of good quality Red oxide primer after two coats of good quality Red oxide primer of Ibeam poles.
b)As above with two coats of good qualityAlluminium paints afterof Ibeam poles.
Estimate for construction of 33KV Terminal Bay at HESCOM 33/11KV S/S, Shiragur to the proposed Karisiddeshwar LIS
33 kV, 25 kA class, VCB Breaker with terminal connector suitable for Al. tube/conductor with spring operating mechanism and mounting structure etc., as per technical specification.
a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., complete as per tec...
b) Upright with out Earth Switch (Live Point Height
3750 mm) The exsiting meetring CT GOS to be replaced by new one
Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-1-1 A (3no...
Oil filled voltage Transformer 0.2 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class :33 kV/sqrt3 , 110 V/sq...
30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2
33 kV Sub-station Control and Relay panel: Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for line
Supply , Erection of Station Structures and Mounting Structures:
i) Station structures Tower - 3T1 with peak (0.365 MT per structure*2) including cost of all material, machinery, labour, transportati...
ii)3B1 (6M Width) (0.194 MT per structure*3) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by Engineer-In-Charge.
Supply, Erection of Mounting Structures
iii) 33 kV Isolators ai) Live point height 3750 mm
Note: Three numbers of flexible terminal connectors per Isolators suitable for 63mm Aluminium tube(0.248 MT...
iv)Supply, Erection of Mounting Structures
Live point height 3750 mm (0.25*2 MT per structure) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc...
v)Supply, Erection of Mounting Structures
Current Transformers for 33 kV CTs (0.152 MT per structure*3) Including cost of all material, machinery, labour, transportation, taxes with all leads and lif...
vi)Supply, Erection of Mounting Structures
VoltageTransformers for 33 kV PTs (0.152 MT per structure*3) Including cost of all material, machinery, labour, transportation, taxes with all leads and ...
vii))Supply, Erection of Mounting Structures of LA//PI(0.075*6 MT) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by ...
viii)) GI Nut and bolts for the above structures ( 3 *5%)
Supply , Erection of 7/ 3.65mm GI wire for Ground conductor, 33 kV Side including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
ACSR ConductorLYNX ACSR-33 KV Side
Formation of Main/Cross bus with single LYNX (Only erection portion) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by...
Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour,...
Supply, Erection of Insulators : 90KN polymer long rod along with Tension lamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, transportation, ...
Supply and fixing C type wedge /Terminal connector/ST/PI/GOS Pad clamps suitable for LYNX to Coyote Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts e...
Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts et...
ii)4 Core x 6 Sq.mm
iv)4 Core 2.5 Sq.mm
v)2Core 2.5 Sqmm
Site Surfacing Jelly spreading :Providing and spreading 20/25 mm jelly in station yard including conveying, stacking for measurement, spreading in layer of 100 mm over all including cost of all materi...
a) MSFlats 50x6mm for earth connection:Earth mat formation as oer the KPTCL R&D design welding and applying ACB paints( inclusive of all T&P and consumables) including cost of all material, machine...
b) GI Flats 50x6mm for earth connection: Grounding of equipment with 50x6mm G.I flat and connecting equipment to the earth mat/ground pit each point of Earthing with all formation works like bending t...
c)Supplying and laying of MS 32 mm dia round rods welding and applying ACB paint at welded portion
d) Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part clamp out of G.I.fl...
e) Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non pressure type) for earth pits. Including cost of all material, machinery, labour, transportation, taxes with all lead...
i)DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
Maintenance Tools and Plant P) Grouding sticks exteble upto 18 feet 3 nos of each 6 feet sticks of 3 phase R-Y-B (3 No one set)
Fire Fighting Equipments with necessary mounting Stands: A).Foam type extinguisher ii.9 Litre capacity
B). Water Type (Gas Pressure Type) 9.0 Liters
C). Carbon Dioxide Type, 4.5 Kg capacity
D). Sand Type i.G.I.Bucket 9 Ltr.capacity
ii.Steel Stands
Yard lighting a)Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening ...
b)Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fitt...
c)Supply of 120 W LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moul...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granit...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying ...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification
Cable Trenches including Road Crossing:
Engineering and Construction of RCC (grade M-20),type cable trenches, pipe trenches of required depths including cost of excavation, back filling and disposal ...
Operation and maintenance of the scheme for 5 years excluding power charges.
Operation and Maintenance for I year
Operation and Maintenance for II year
Operation and Maintenance for III year
Operation and Maintenance for IV year
Operation and Maintenance for V year
Survey, Investigation, Design, Supply, Installation, Testing and Commissioning of Lift Irrigation Scheme (Head Works consisting of construction of Intake Canal, Jack well cum pump house, Vertical Turbine pumps coupled to HT Motors, Power supply including terminal bay, 33/6.6 KV Electrical Sub Station, Transmission line) for augmenting suffering achkat of 9139 Ha pertains to Chikkud Branch canal in Raibag Taluk of Belagavi District by lifting water from Krishna River including operation and maint
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
a) POWER TRANSFORMER :(HV side and LV side cable type) Power Transformer Copper winding, 8.5 MVA, 33/6.6 KV Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with OLTC, RTCC panel, etc, complete fil...
33 kV, 25 kA class, VCB Breaker with terminal connector suitable for Al. tube/conductor with spring operating mechanism and mounting structure etc., as per technical specification.
RCC Pole - 9.5 Mtr Long, 350 Kg WLfor33kVLines) (Common SR Volume-VI, 2023-24, P- M-3of81- Sl-no-8- Itm-No : 1.08 & P-L- 44of 81, SLN-31-I No-2- 2.03) (132+10NS IBEAM+ poles for DP 10 N0 + TP 6 No.s)
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Operation and Maintenance for I year
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS1710 having specified pump output under specified ...
Survey, Investigation and Detailed Engineering of Lift Scheme consisting of Electromechanical, Electrical works, Intake channel, Jackwell cum Pump House, Raising Main including structures, Delivery C...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
RCC Pole - 9Mtr Long, 145 Kg WLfor stud) including material,labour ,erection,excavation,fixing
b)160 KVA Aux Copper windindTR, 6.6KV/433V Delta / Star, Dynll, 3 Ph, 50Hz, core type winding with off load tapchanger complete etc,as per IS 1180 Level-01 including erection and testing and comissio...
Operation and Maintenance for II year
a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., complete as per tec...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped with vac...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Operation and Maintenance for III year
b) Upright with out Earth Switch (Live Point Height
3750 mm) The exsiting meetring CT GOS to be replaced by new one
Providing casing embankment using semi-pervious / pervious soil from dump areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations ...
Additional VCB including sheet metal enclosure, extension bus bars, metering and relays complete for each additional pump for moumting on common panel board
33 kV, 25 kA class, VCB Breaker with terminal connector suitable for Al. tube/conductor with spring operating mechanism and mounting structure etc., as per technical specification.
Pre tressed spun pole 11mtr long 500kg WL/I-Beam 11mt long (200x100MM) ISLB-200X100=19.8Mtr/KG =217.8KG-RS 68/KG
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
DP Set (2RCC Pole Strucrure Kit except pole
Providing and constructing uncoursed rubble stone masonry in CM 1:5 proportion by volume for canal side lining using stones and stone chips including cost of all materials, machinery, labour, batching...
Operation and Maintenance for IV year
a) 33 kV, 800 A, 25 kA Isolators, double break with manual operating mechanism, with solid core insulator, terminal connector suitable for Al. tube/conductor, marshalling box etc., complete as per tec...
Providing Ductile Iron Push on special conforming to IS: 9523:2000 - All DI PN :16.0 Dismantling Joints
Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-1-1 A (3no...
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage ...
Operation and Maintenance for V year
TPSet (3 RCC Pole Strucrure Kit) including 5 Kg, 8 SWG GI Wire for Structure Grounding
b)Upright with out Earth Switch (Live Point Height
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Oil filled voltage Transformer 0.2 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class :33 kV/sqrt3 , 110 V/sq...
Providing and laying insitu vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...
Prime Coat ( Low porosity ) Providing, and applying primer coat with bitumen emulsion (SS - 1) on prepared surface of granular base including celaning of road surface and spraying primer at the rate o...
a) 33 KV V-shape /Horizontal cross arms/ Httopsupport,bolts, nuts & washers
Supply, installation and commissioning of Load Break Switch with HRO fuses, CBCT and ELR in painted sheet metal enclosure with operating console and all other ancillary operations complete for use alo...
30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2
a)Oil filled Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-1-1 A (3...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Providing and laying insitu vibrated M-15 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour,cl...
Providing and applying tack coat with Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Tack coat on B...
33 kV Sub-station Control and Relay panel: Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for line
Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete. 20 mm thick 100 mm d...
Clamp 9.5M RCC Pole for 33kV
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
b)Oil filled neutral Current Transformer 0.2s class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class : 400-200/1-...
DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete a...
Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weigh...
Oil filled voltage Transformer 0.2 class with terminal connector suitable for Al. tube/conductor with marshalling box etc., complete as per technical specification. 33 kV Class :33 kV/sqrt3, 110 V/sqr...
A)33kV Polymer Pin Insulator with pin
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supply , Erection of Station Structures and Mounting Structures:
i) Station structures Tower - 3T1 with peak (0.365 MT per structure*2) including cost of all material, machinery, labour, transportati...
Supply and installation of Auxiliary transformer 6.6 KV / 433 Volts 160 KVA copper wound, insulating oil filled with all accessories complete as per specifications.
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Semi Dense Bituminous Concrete Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumino...
Providing and forming 350x 350 x 400 mm deep filter drain consisting of 75 mm thick 10 mm down coarse aggregate layer around pressure relief pipe and 75 mm thick sand layer around coarse aggregate lay...
30 kV 10kA Lightning Arrester Normal Duty polymeric Discharge Class -2
B)33kV 70 KN Polymer Insulator (Ball & socket type)
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 V AC mounted in a duly painted sheet metal enclosure provided with NO / NC relays for transmitting signal to VCBs...
ii)3B1 (6M Width) (0.194 MT per structure*3) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by Engineer-In-Charge.
Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting (Boundary pillar)
Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump.
a)33 kV Sub-station Control and Relay panel: Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for line
Kilometre Stone : Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc (ii) Ordinary kilometere stone precas...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...
Supply, Erection of Mounting Structures
iii) 33 kV Isolators ai) Live point height 3750 mm
Note: Three numbers of flexible terminal connectors per Isolators suitable for 63mm Aluminium tube(0.248 MT...
C) C-Type edge connectors for Coyte toCoyote ACSR
Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, f ii) Ordinary Kilometer stone (precast)
Supply and installation of floor mounting type LTAC panel of approved make fabricated from sheet metal and painted with provision for suitable incoming and specified number of outgoing feeder inlets w...
LT 2 Pin cross arms, with pole clamps, bolts, nuts (for RCC poles)
Providing and fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with...
iv)Supply, Erection of Mounting Structures
Live point height 3750 mm (0.25*2 MT per structure) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc...
Kilometre Stone : Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc 200 m stone
b) 33 kV Sub-station : Simplex 110 V DC compatible to SCADA complete as per technical specification. 33 kV Panel for for Transformer (There is no SR rates for 33/6.6 Kv transformer C&R panal hence low...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm 0.05PERC total coated thickness, Zinc coating 120 g/Sqm as per IS 277, in 240 mpa steel grade 5-7 microns epoxy prim...
Guy set with (5kg guy wire+Guy clamp1+-Turn buckle-2+ancker rod-1+fish plate-2+strain 15no+2ns
v)Supply, Erection of Mounting Structures
Current Transformers for 33 kV CTs (0.152 MT per structure*3) Including cost of all material, machinery, labour, transportation, taxes with all leads and lif...
Supplying, laying and connecting xLP 6.6 KV E 3 core cable suitable for 28 KA short circuit rating with end connectors from transformer to HT panel etc. complete as per directions 400 Sqmm
Boundary pillar / Guard Stone : Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding finishing and ...
Flashings/Aprons
Steel fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Providing guarding between HT & LT line up to a Span of 40 Mtr(Guy wire5.14kg+clamp2ns+ 2ns special crossarm
Supplying, laying and connecting xLP 6.6 KV E 3 core cable suitable for 28 KA short circuit rating with end connectors from HT panel to motor, starters, capacitors, panels etc. complete as per directi...
vi)Supply, Erection of Mounting Structures
VoltageTransformers for 33 kV PTs (0.152 MT per structure*3) Including cost of all material, machinery, labour, transportation, taxes with all leads and ...
North light curves
Providing and constructing dry size stone pitching using 200 to 250 mm size stones with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labou...
Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt : 521 kgs/km
vii))Supply, Erection of Mounting Structures of LA//PI(0.075*6 MT) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by ...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by-pass vaccum contactor with all accessories complete hou...
a) Single Tension Clamps for Coyote ACSR
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
viii)) GI Nut and bolts for the above structures ( 3 *5%)
Supply, Erection of Isolator Mounting Structures
b) Live point height 3750 mm (0.25*4 MT per structure) Including cost of all material, machinery, labour, transportation, taxes with all leads and li...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Supply, Erection of CT/NCT Mounting Structures
c) Current Transformers for 33 kV CTs / NCT (0.152 MT per structure*14) Including cost of all material, machinery, labour, transportation, taxes with al...
b) Repair sleeve joints for Coyote ACSR Conductor
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Supply , Erection of 7/ 3.65mm GI wire for Ground conductor, 33 kV Side including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required s...
c) MSC joints for Coyote ACSR Conductor
ACSR ConductorLYNX ACSR-33 KV Side
Supply, Erection of PT Mounting Structures
d) VoltageTransformers for 33 kV PTs (0.152 MT per structure*6) Including cost of all material, machinery, labour, transportation, taxes with all leads an...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Formation of Main/Cross bus with single LYNX (Only erection portion) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by...
e)Supply, Erection of LA/PI Mounting Structures of LA//PI(0.075*15 MT) Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
Finishing walls with water proofing cement paint of required shade : New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
a) Spiral Earth Electrode for RCC/I-Beam poles with No 8 SWG Earth wire for earth connection 16 mm nuts excluding charcoal and salt.
Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour,...
f) GI Nut and bolts for the above structures ( 8.19 *5%)
b)GI grounding pipe-B-class-42mm dia,2.5mtr long-3.2mm thick with GI strips and washer complete minimum wt of pipe should be 7.3kg, well burnt good qlty charcoal 30kgs and good qlty salt 50kg with gu...
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and as per directions of Engineer in charge.
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, gate groove liners with all accessories for canal escape / reg...
Supply, Erection of Insulators : 90KN polymer long rod along with Tension lamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, transportation, ...
Supply , Erection of 7/ 3.65mm GI wire for Ground conductor, 33 kV Side including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed...
a) Danger board with clamps, bolts nuts for fixing single pole and for DP Sructure as per drawing
Design, fabrication, supply, erection, testing and commissioning of sliding type stoplog gate consisting of skin plate, horizontal and vertical girders, lifting hooks, bronze padded slide blocks, stif...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screenS ) with all accessories for pump house intake structu...
b) Number Plates with pole clamps, bolts nuts for fixing single pole
ACSR Conductor LYNX ACSR 33 KV Side
Supply and fixing C type wedge /Terminal connector/ST/PI/GOS Pad clamps suitable for LYNX to Coyote Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts e...
Steel Fabrication : Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
c) Suppling and fixing of barbed wire to poles (2mtr/pole)
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts et...
Formation of Main/Cross bus with single LYNX (Only erection portion) including cost of all material, machinery, labour, transportation, taxes with all leads and lifts etc., complete and as directed by...
Supply, Erection of Insulators : 33 kV solid core insulators along with bolted type tension clamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour,...
Digging of pit a)Digging of 158+8 pits1.8mtr depth for erection of pole/Ibeam or spun pole (ordinary soil)
Design, fabrication, supply, erection and commissioning of electrically operated mono-rail hoist assembly consisting of electric motor, rope drum, gear system, wire rope with lifting attachment, festo...
ii)4 Core x 6 Sq.mm
Steel door ( frame CRCA sheet Shutter tubular sections )
iv)4 Core 2.5 Sq.mm
b)Digging of 50 pits for GUY sets (ordinary soil)
Design, fabrication, supply, erection and commissioning of structural steel hoist supporting structure consisting of columns, cross beams, bracings, stiffeners, mono-rail with fixtures with all access...
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providi...
Supply, Erection of Insulators : 90KN polymer long rod along with Tension lamps and hardware suitable for LYNX ACSR.(33 kV side) Including cost of all material, machinery, labour, transportation, ...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...
v)2Core 2.5 Sqmm
Supply and fixing C type wedge /Terminal connector/ST/PI/GOS Pad clamps suitable for LYNX to Coyote Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts e...
MASONRY WORKS : Providing and fixing acid resistant tiles of approved quality for battery room flooring / dadooing set over a bed of 20 mm thick CM 1 : 3
proportion by volume including cost of all mat...
c) Digging of 13ns pits for providing GI pipes (ordinary soil)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...
Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...
Site Surfacing Jelly spreading :Providing and spreading 20/25 mm jelly in station yard including conveying, stacking for measurement, spreading in layer of 100 mm over all including cost of all materi...
Supply and laying of PVC armoured Insulated Copper Control Cable with lugs/ferrules Size of Cable Including cost of all material, machinery, labour, transportation, taxes with all leads and lifts et...
ii).4 Core x 6 Sq.mm
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
a) MSFlats 50x6mm for earth connection:Earth mat formation as oer the KPTCL R&D design welding and applying ACB paints( inclusive of all T&P and consumables) including cost of all material, machine...
Pole concreting : -Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m he...
Tubular Steel Railing on Medium Weight Steel Channel (ISMC series) 100 mm x 50 mm : Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (...
BACK FILLING & OTHER WORKS : Providing rubble / boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary o...
b) GI Flats 50x6mm for earth connection: Grounding of equipment with 50x6mm G.I flat and connecting equipment to the earth mat/ground pit each point of Earthing with all formation works like bending t...
Guy concreting - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m heig...
iv).4 Core 2.5 Sq.mm
Design, fabrication, supply, assembling, testing and commissioning of Remote control panel made of sheet metal in desk type configuration duly painted with recess for cable entries at the bottom equip...
v).2 Core 2.5 Sq.mm
c)Supplying and laying of MS 32 mm dia round rods welding and applying ACB paint at welded portion
Providing pressure relief valve for manifold pipe of PN : 16 : supplyong, fixing and commissioning pressure relief valve of approved, make body and sheet ring of bronze, class conforming to IS: 14845,...
Providing and constructing protective railing consisting of cast in-situ railing posts of size 150 x 150 mm at bottom, 100 x 100 mm at top and 750 mm height, placed approximately at 2 m centre to cent...
a)Supplying and painting of two coats of good quality Red oxide primer after two coats of good quality Red oxide primer of Ibeam poles.
d) Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part clamp out of G.I.fl...
b)As above with two coats of good qualityAlluminium paints afterof Ibeam poles.
Supplying, installing, testing and comissioning pumphouse lighting insidse and outside including small power with D board, wiring, lighting pictures, earthing complete, including transformer centre.
Turbo Ventilator:Non Power Driven with 1.3mm thickness and 38 No.s of Vanes & turbine doom thickness 1mm and total weight not less than 6kg for Industrial use for area upto 100m2 for Industrial use
Battery Set & charger: a)Supplying of palnte type and Installing, assembling, filling of acid, wiring, assisting, test-charging and discharging Battery set of 110 V, 100 AH.
e) Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non pressure type) for earth pits. Including cost of all material, machinery, labour, transportation, taxes with all lead...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...
i)DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
b)Supplying and Installing, assembling, Battery charger of 2x110 V, 100 AH. 2 No. of flot cum boost15A, including control panels, changeover arrangements etc.. With 2 separate DC distribution panels
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Maintenance Tools and Plant P) Grouding sticks exteble upto 18 feet 3 nos of each 6 feet sticks of 3 phase R-Y-B (3 No one set)
Site Surfacing Jelly spreading : Levelling of station land & Providing and spreading 20/25 mm jelly in station yard including conveying, stacking for measurement, spreading in layer of 100 mm over all...
a) MSFlats 50x6mm for earth connection:Earth mat formation as oer the KPTCL R&D design welding and applying ACB paints( inclusive of all T&P and consumables) including cost of all material, machine...
Fire Fighting Equipments with necessary mounting Stands: A).Foam type extinguisher ii.9 Litre capacity
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...
B). Water Type (Gas Pressure Type) 9.0 Liters
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...
b) GI Flats 50x6mm for earth connection: Grounding of equipment with 50x6mm G.I flat and connecting equipment to the earth mat/ground pit each point of Earthing with all formation works like bending t...
Supplying and laying of MS 32 mm dia round rods welding and applying ACB paint at welded portion
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granit...
C). Carbon Dioxide Type, 4.5 Kg capacity
c) Cast iron pipe electrode of 100mm internal dia 13mm thick 2.75mtr long: Grounding of equipment by providing cast iron pipe of 100mm I.D. 13mm thickness 2.75 mtr long with 2 part clamp out of G.I.fl...
D). Sand Type i.G.I.Bucket 9 Ltr.capacity
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete
d) Supplying and fixing 450mm dia x 450mm height 1.5" to 2" Hume pipe collars (non pressure type) for earth pits. Including cost of all material, machinery, labour, transportation, taxes with all lead...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of...
ii.Steel Stands
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded ...
HESCOM Metering panel (Main and check meter)struss etc for meter box (Including Sheete roofing)
Yard lighting a)Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening ...
i)DC Distribution Panel (Indoor) as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...
Providing, fabricating, assembling and fixing in position aluminum partitions Using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 1...
b)Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fitt...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
c)Supply of 120 W LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moul...
ii)LTAC Panel (Indoor), 415 V as per technical specification comprising of voltmeter and ammeter, 1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU, + 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G SFU, 6 nos. 3...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Maintenance Tools and Plant A).Ring spanner set
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing & fixing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design d...
B).Pipe wrench 24 inches size
C).Pipe wrench 18 inches size
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granit...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying ...
D).Double end spanner- 12 nos. per set
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification
E).Hack saw frame B185
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...
F).Hydraulic crimping tools upto 1000 sqmm
Cable Trenches including Road Crossing:
Engineering and Construction of RCC (grade M-20),type cable trenches, pipe trenches of required depths including cost of excavation, back filling and disposal ...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
G).Rubber hand gloves 15 kV tested
H).Rechargeable 5 W LED Hand Torch
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...
I).Insulated cutting plier 12 inch size
J).Insulated cutting plier 8 inch size
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
K).Line live tester AC/ DC 500 V
RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of ...
Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc...
L).screw driver 18 inch
Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With ...
M).screw driver 12 inch
Steel S type office chair : Teak wood handle. Chair using 16g round pipe and 18 g sheet / perforrated sheet with Arm.
N).Hammer 8 lbs
O).Hammer 2 lbs
Office Table: Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side. Table to be covered with 1mm laminate wherever visible. Hardware of the drawer should be telescop...
P) Grouding sticks exteble upto 18 feet 3 nos of each 6 feet sticks of 3 phase R-Y-B (3 No one set)
Precast compund wall: Providing and fixing factory made M20 Grade Cement Concrete Precast Boundary Compound Wall of Size 2100mm (L) x 300 mm (B) x 50mm (D) with Panel weight approximately 77kg and pan...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends,junction box,elbows,screws at an interval of 300 mm as required.-20mm
Rubber mats 1000mm X 2000mm X 12mm size suitable for 15kV class
Fire Fighting Equipments with necessary mounting Stands: A).Foam type extinguisher i.50 Litre capacity
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm(Phase & Neutral)&1x1.0sqmm(Earth wire)FRLS multistrand PVC insulated copper wire(confirming to IS694:an...
Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall,including necessary rawl plugs,Machine/NF ...
ii.9 Litre capacity
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...
B). Water Type (Gas Pressure Type) 9.0 Liters
C). Carbon Dioxide Type, 4.5 Kg capacity
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.-6A One Way Switch
D). Sand Type i.G.I.Bucket 9 Ltr.capacity
6A Two Way Switch
Stepped Fan Regulator Two Module
ii.Steel Stands
Yard lighting a)Fabricating, supplying and erection of 9 ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S355JO steel plate for shaft, IS2062 for base plate with door opening...
6/16A Universal Socket
b)Supplying and Fixing 32mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing LED street light fitt...
Supplying capacitor type ceiling fan complete with down rod blades,shackle,canopies etc,for operation on 230V,50cycles.Single phase AC supply conforming to IS -374-1979 and with double ball bearing sy...
c)Supply of 120 W LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moul...
Supplying of-PVC Batten with integrated LED tube LED light fitting 1 x 4' - 20/22 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI80.Power Input:220 240V@...
Lumpsum for Power Connections
CIVIL WORK a)Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
b)Providing and laying in position Cement Concrete1:3:6 for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...
c)Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, gradedaggregates for well steining including cost of all materials, machinery, labour,cleaning...
d)Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tyin...
Borewell depth of 50 to 100 Mtrs
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
e)Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Security fencing to Electrical Sub Station with RCC poll and chain link mesh. a)Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates mak...
b)Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the dire...
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Transformer foundation and associated rail track: 66/6.6KV Transformer( for 8.5MVA Transformer)
Design, Engineering, supply of labour, material, equipments and construction of transformer and radi...
Auxiliary Transformer Platform:
Construction of size stone masonry Transformer platform for 250KVA,11kV/0.433V LT Transformer as per drawing enclosed, technical specifications and directions of the ...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments 1x3x4 Sq...
Road Works: Design and construction of roads with suitable gradient and walkways / shoulders within substation as per specification, layout and sectional detail drawing etc., complete in all respect. ...
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments-50mm
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Cable Trenches including Road Crossing:
Engineering and Construction of RCC (grade M-20),type cable trenches, pipe trenches of required depths including cost of excavation, back filling and disposal ...
Providing and fixing gate:- Providing and fixing gate as per approved drawing, technical specification and directions of engineer incharge of work including RCC supports with all items not mentioned...
Supply and delivery at site 50mm(2”) dia heavy duty CI adopter set complete suitable for uPVC Column pipes for Submersible pumpsets
Baffle Wall: Design and construction of Baffle wall in between Power transformer.
Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Circulars.pdf
Instructions to Tenderers • 34.77 MB
Barchart.pdf
Others - Bar chart-Milestone for Execution • 0.21 MB
Tender Notificaiton.pdf
Others - Tender Notification • 0.49 MB
Specifications for Civil and Electrical Works.pdf
Others - Specifications • 48.64 MB
Scope of Work.pdf
Others - Scope of Work • 0.57 MB
Drawings.pdf
Others - Drawings • 7.65 MB
KLIS BID DOCUMENTS KW4.pdf
Tender Document • 1.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].